580. Making a Chattering/Sgraffito Texture Thin-necked Bottle with Hsin-Chuen Lin 林新春 細頸瓶跳刀雕紋示範

Soul of Siberia
114 followers
7 Video Views·Apr 27, 2021
To see or buy my finished work and pottery tools, please visit my ETSY shop:
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
http://www.etsy.com/shop/potterysquare
To watch more of my throwing videos, please visit my channel:
http://www.youtube.com/user/hsinchuen/videos
To learn more about Hsin-Chuen Lin, please visit my Website:
www.mypots.net
Follow me on Instagram: hsinchuenlin
Like me on Facebook page: Hsin-Chuen Lin Ceramics
Take my time to shape it and make the smaller opening.
All right, so I'm ready to trim this piece. It's quite dry. It's way over the hard stage,
but I can use my carbide tool to trim drier clay easily, so I don't worry about it getting too dry.
I'll trim the part this way first, and then I'll turn it upside down and trim the foot.
All right, so the top is fine, and I'm ready to trim the bottom.
The opening is small, so I have to put it on a chuck, but I couldn't find a chuck that is
a little bit too big and too short. I think I'm finding this.
That's a piece of PVC pipe, and this one should fit, so I'm using it as a chuck.
I don't want the edge to be a little bit too sharp, and I don't want it to ruin my surface,
so I put some clay to prevent that from ruining the surface.
First, I will try to find the level. I'm using this bubble level easier, much easier.
All right, so this concludes my trimming demonstration. The clay is kind of on the dry
side, but with the carbide tool, it's very easy to trim it. Then I brush the black slip over,
and then do a little bit of a chattering here, and then here I was using my
Sculpey tool to just spontaneously carving the lines. I don't know if that might be too busy or
not, but just randomly and spontaneously carving all the lines. All right, I hope
this demonstration helped, and see you next time.
