Here is a free course featuring Brent Roth about different ways to set up rappels through a canyon. This considers ease of rigging, abrasion, ease of rescue and how efficient it is to move people through the canyon. Episodes 1-5 show the systems, Episode 6 shows how it can all be done with 1 device, Episodes 7-8 are friction tests, Episodes 9-10 are break tests of the hardware and the knot blocks. All the episodes are in the textbook
00:00 - Intro To Devices 02:10 - Use Of Palikoa 03:18 - Single Static System 04:26 - Single Releasable System 06:20 - Twin Isolated System 08:07 - Twin Compound - Static 11:50 - Twin Compound - Releasable 13:54 - A Block System
Welcome to another video in our Canyon core set,
a little course we decided to make on Canyon rope systems.
This is definitely not the first video
you should be watching about this topic.
We went into single rope systems and twin rope systems
and double rope systems.
And he showed us, Brent Roth here,
who likes to Canyon a lot in the Pacific Northwest.
He showed us a lot of different ways
to do a lot of different things
with a lot of different toys
because he owns every toy you can imagine,
including all of these
when you technically only need one of them.
This is a palicoa, this is a critter,
this is a hoodoo, and this is a resonator.
Right.
Resonator.
I added a G.
I like to add letters for redundancy, apparently.
Yes, you're good at that.
These all are symmetrical.
Yep.
In nature.
Yep.
And you called this concept the hangman.
Right.
Because it kind of, this one looked mostly like
a man that was hanging.
Right, and hangperson just sounds weird.
Yeah.
So he's gonna show us literally everything we learned
in the entire course that you can do this
with this one single device,
and it works with any of these devices.
Yeah, some of them are a little bit easier
to do these techniques with,
and you definitely need to be familiar
with a few techniques and how to use these devices.
You should know and understand how to cleat them off
as a tie-off technique,
and that's how you can really slim down
the amount of gear you need
and still get a lot of different rope systems
like we talked about out of using these devices,
but you've gotta be really familiar with them.
Wait, you have to know what you're doing?
Yeah, it's crazy.
Weird.
So there's a lot of Canyon courses out there,
a lot of Canyon resources out there.
We're gonna link them all in the blog
that this is going to be a part of.
If you find this video,
there's a link in the description below
for the blog on the website
that will put you in order of all these videos
and point to these other resources
that you will benefit a lot from.
So you've showed us the Joker,
and the Joker required two eight devices.
Yep, or we used the Totem.
It was a Camp Ovo.
The Kong GG's the same thing.
It's a dual live friction device.
Yep.
You showed us what other devices.
Knot blocks, carabiner blocks.
The standard figure eight for your eight blocks.
Do every system with this.
Right.
Every tie-off, every lock-off, every block-off,
and the idea is that you're carrying just this,
or would you also carry stuff in case you dropped it?
So that's what's kind of nice is like,
okay, these are expensive,
and it's do I need this in order to do all these systems?
You know, you don't.
Figure eights are a lot cheaper.
These other devices are a lot cheaper,
but then I gotta carry multiple ones.
But I kind of look at it as,
well, if I'm becoming more of a technician in Canyon,
having a spare one of these within the team
really isn't a bad thing.
It's nice to know how to use your tools in multiple ways.
Right.
What's an eight cost, roughly?
I think you can get them for between eight and 12 bucks.
Ironically, eight bucks.
Yeah.
Okay, and this is probably 10 times.
Yeah, most of these run between 40 and 50 dollars.
Okay, so starting with a single rope system
that's static and not releasable,
you could just literally just tie it.
Yep, don't need this, right?
You don't need it, just tie it.
And run it through and we covered that
where I'm just gonna put a block on this other side
or tie a knot, right?
I don't need this device to do that.
But how this does replace
if I wanna make a releasable system,
the fact that I do carry this in a configuration like this
so the securing device or what would be your quickdraw
is already connected to it.
If I'm using this as a eight block,
putting the device on here,
pulling the bite in,
loading it up just like I would a normal eight
is a good start.
But this is where this is kind of nice
is that I can take this guy and bring it back.
Now, this is the part
where you need to be familiar with your device
and setting some friction modes in here.
And they have this center hole
and if you're using a rope that's skinny enough,
just passing it through that center hole,
grabbing another leg.
That's not going anywhere.
Yep, that's not going anywhere.
That's not releasable though, is it?
Oh, absolutely it is.
Okay.
You would just feed a little slack here to undo this.
Yeah, so what I like with this-
And then I can do this.
Is I still have the advantage of the friction options
of this device the way it's designed.
So depending on what's going on with the lowering,
I can easily move from high friction to low friction
just like you would on rappel.
You can't do that with a regular figure eight
in this configuration.
And notice I did not have to remove or do anything here
in order to do that.
Now we pull test this in the lab.
How many things did we break trying to break this?
Put it this way, we broke enough stuff
you were starting to get a little upset.
How many of yours things we were breaking
trying to break this?
This is aluminum.
A random steel carabiner off eBay
that Bobby brought to the lab is finally,
after pulling it above 30, 40 kilonewtons,
is finally what broke this.
And then in a basket shape, this sling is,
it's 22 kilonewtons, but in a basket it's 44.
And so this is super strong enough
for anything we're covering in this video.
Some people get watered up about redundancy.
Yeah, I wouldn't even be worried
about two people on rappel at all.
Once you have 10 to one plus safety ratios,
redundancy's not as important on the breaking side of things
as much as like an error issue.
So the next system we can go into
is a twin isolated releasable system.
We demoed the Joker, the Totem version of it's the Jester.
We used the Camp OVO in kind of a Jester mode
where I isolated the two strands with the device.
So I can do the same thing with this.
This is where I rub the rope through the rappel ring
and I'm gonna connect it to the rappel ring
and it's hanging down here.
Gonna reach through the head of the device
and wrap this around.
You just mirror it.
Two arms, yep, on both sides.
And this isn't moving.
Isolated one side from the other
going through the loop with friction.
Is this conditional?
Where you have to hang onto this tail?
Yep, that's the definition of an isolated release.
And that's what was happening with our other options
as well is they all required you
to either have somebody on this end or you holding it.
Yep, just like a twin isolated system is what this is.
So what I like about this versus some of the other ones
is it's very easy to set up.
It's nice and clean looking.
I didn't need any extra gear.
Some people might be concerned,
especially when you're using some of the other devices
that these aren't as closed,
is that this is an open system.
It's like, okay, well, could this fall off?
This is why I say this is kind of an advanced technique.
It requires a lot of attention to detail
when you're building and using this.
The extra friction of all of these in here
is what is particularly interesting
is that I can fully load this,
and this is what we need to pull test.
And it's like, so in the event
if somebody does let go of this accidentally,
this isn't gonna take off.
But I could still, you keep applying,
I could still, without getting my.
It doesn't take much to release it.
So yes, it's releasable,
but it has higher friction than the other ones,
whereas if I let go of this,
or don't hang on to it enough,
if I'm not attentive,
and somebody's on repel,
it'll start moving.
And then even then, I can still increase
more friction if I needed to.
So that is the twin isolated system,
which is conditional.
So for a twin compound system,
that's when I'm gonna start with using
both ends of either the same rope
or two separate ropes,
but I want to set rope length
on each one of these ends,
and the bag is either a double-ended rope bag
of some kind is going to stay
up here at the ankle with me.
And I like, if you double stack your bag,
or depending what type of bag you are,
if I can start rigging with both these ends,
it is just as fast as rigging one line.
But I'm gonna start by putting
one of the ropes through the ring
and the other one through.
One through the ring.
One through the ring,
because that's gonna be my retrieval side.
And the other one through the carabiner.
Now this is where you do want to be careful,
depending on what configuration.
So I'm using a Dyneema sling here,
but this would be creating a rub point.
So I might not want to do that.
So adding another carabiner for that,
or if this was a small quick link,
I could do that.
What I don't like is having this
directly on the carabiner.
It does-
You lose all the flexibility.
You lose a lot of flexibility.
Yeah.
So again, this is why this is an advanced technique
and requires that attention to detail.
I don't want to just arbitrarily do that.
Because if this rope was rubbing through here,
it's not just while you're feeding rope.
No.
This is eventually going to be like,
if you need to lower someone,
you're putting weighted force.
Rubbing on a weighted Dyneema strand,
that is not any good.
So that-
Rope on rope.
Ropes moving over ropes is bad.
So to get around that,
all you need to do is add another carabiner
somewhere into the system.
And I don't want to run this through the ring
because that really limits the changing it
when I want to retrieve it.
So I do want to run it through something as a redirect,
because I do want that friction.
So now I can pull the rope length down
and you'll notice this will look very familiar
to the isolated.
You can do the same thing with each strand.
So this is on the rappel strand
or the front side of the anchor,
as I refer to it.
But you have a whole bunch of rope behind this now.
And add friction.
Right.
So now I've got these two friction
on the front side on the rappel
and you can see it's symmetrical.
I need to secure the backside,
basically my brake strand on this.
So by doing that is I can come in here
and depending on your device,
getting in a hitch,
securing it with a type of hitch
that will bite down on itself
when it starts to load.
So as that strand wants to move,
it should grab the strand and not just pull through.
So knowing how to cleat your device off properly for this
will make a difference.
And again, you don't want to run a cleat across the device
because once I do that.
You're pinching.
I've locked down one side from the other side.
So I've kind of eliminated.
So you're always staying on your half of the fence.
Yep.
So this strand stays on this side.
So I want to be able to lock this off well
with a good cleat of some kind.
And then do the same thing on the other side.
I'm gonna want to lock this off with a good cleat.
Now I've got a cleat on both sides.
This is not dependent on you.
Like if I'm on rappel,
you can independently do something with this.
So these two sides are independent.
Because you have a rope full of,
you have a bag full of rope that you can individually,
before it went through the ring directly
and you couldn't feed this out
without having slack on my side.
So this is where.
Compound, twin compound, releasable.
And this is where I can set rope length with both of these.
And I cannot set rope length with both ends
unless I happen to have just the right length of rope
on an isolated system.
So if I go down, I'm like,
hey Brent, I need 10 more feet.
Right.
In order not to make this giant jump into the pool.
Because you don't want a whole bunch of extra rope
floating in the water.
You want to be able to get off rope and swim away.
Right.
Make sure you go check out the website.
Brent has written a textbook
that corresponds with this course.
What's great about making these standalone YouTube videos
is they're more likely to be found.
So 10,000 or even 30,000 people
are gonna benefit from this information,
which gets us really excited.
Instead of trying to charge for the course
where you're only gonna get one or 200 people
to maybe pay for it.
So by being able to do this on a shoestring budget,
whereas Brent has donated all of his time,
Andrea has spent days filming for us,
and I've edited all these videos myself,
we're able to make it super, super cheap.
But it does cost money to make.
And we basically need only 1% of the audience
to either donate $1 per episode on Patreon
or buy gear on extremegear.org,
which supports us 10% with whatever you buy.
And they do sell Canyon gear as well now.
As a thank you to my Patreons,
I give them early access to these videos in this course,
whereas they come out once a week
until they are fully released.
We hope you benefit from the content.
So, yep, here's the same system,
twin compound, releasable with two separate ropes.
So-
Same exact thing.
Set up the same way.
One is through the ring,
because you're gonna use that when you go down last.
Yeah, so let's go through that.
How do I retrieve this?
Because it really takes-
You don't wanna leave this at every anchor?
No.
It really takes a lot less steps.
So the catch is that the rope bag,
if I'm using a double-ended rope bag,
and this is the same rope,
is that the bag would need to stay at the anchor.
So you need to make sure that has a nice clean pull.
But all I'm gonna do is convert this into a block system,
meaning that this is my,
the rappel strand that I'm gonna go through,
because it's the one that went through the ring,
so that's the one I'm gonna de-rig completely.
And then I have my rappel strand,
and this is gonna be my pull side.
Since this rope is already long enough going down the pitch,
this is the one I'm gonna use for the pull side.
So since I rigged this with the redirect carabiner,
I'm gonna leave both of these in the system.
But I can just clip this to one,
and then convert this to a carabiner block.
And that is just as secure as the carabiner block.
And the only weight that this will see
is just enough to retrieve my system.
Are you taking this bag with you?
Are you gonna clip it to this,
and have it come down with?
So it depends on how much rope I have,
and how much rope I want to pack down with.
And how ledgy.
And how ledgy it is.
Like this, again, this is why it is advanced technique,
because there's a lot of variables
that you need to look at here.
But I don't need to reconstruct the whole thing
and pull up if I didn't need to.
Maybe because I've been doing the course with you,
this doesn't feel hard.
I feel like the advanced part
is knowing when to apply each thing.
Because now I know like 30 different things for a canyon.
But if I went down a canyon today,
I'd be like, I don't know which one to use.
Right, and that's exactly what
I feel the definition of technician is.
Being a good technician in any rope discipline
doesn't mean I know a bunch of stuff.
It means I know how to analyze the environment.
How to use a bunch of stuff.
How to make good decisions
about when to use all the things that I know.
That's kind of how I look at what's the difference
of being a technician or a technical or advanced thing
versus an operational of like,
I can do this system five different ways, awesome.
And this is why you don't wanna go down a canyon
after watching a YouTube video
or having book knowledge after learning a technique.
It's really important to go with somebody
who knows what they're doing,
regardless of the sport or activity you're doing.
So I think Brent and I are gonna go down a canyon.
And we're gonna have better audio on that round.
And I think you're gonna quiz me
before we get to the anchor.
We're a couple feet away from the anchor.
We're gonna be like, that's what the anchor looks like.
This is the situation.
And we'll make hypothetical,
like I have a hypothetical rope length
or a hypothetical group of newbies behind me.
Because that will depend on what anchor I would rig
if I was leading that group or leading just a team of two.
It makes a lot more sense to go through
the decision process actually in the environment.
Because the first time I went down,
all you had me focus on was don't die.
Not drowning, so I don't have to rescue you.
And teach me how to set rope length and communicate things.
I had no idea what he was doing up there.
But the next time we go down, I'm gonna get quizzed.
So make sure you subscribe to that.
Give us your email in our blog form.
We'll have a place for that so you can get updated.
If you only want stuff about canyon stuff, you can do that.
I'm not gonna spam you about caving and climbing
or highline stuff if that's not what you're interested in.
I did write a paper explaining and going all of this stuff.
That's gonna be in the blog as well.
That is the blog about this video.
And it's gonna be actually multiple blogs.
And we're gonna put them in order.
And it's all gonna be all the stuff he wrote
that actually originated or was the birth of this course.
Do you have any final thoughts?
No, I think that about covers it.
Cool, see ya.
Ah, dude, you gotta tell me
when you're gonna do the rope thing.