DIY Instrument _ Canoe Paddle Stand -- Woodworking

Michael Alm
87 followers
16 Video Views·Dec 14, 2022
For those of you who don't know, I spent years working in museums building displays and mounts
for museum objects. I still do that every once in a while in my own shop and this week I was
contacted by the Natural History Museum here in Seattle and they requested that I build a mount
for this Salish canoe paddle. They're using it for educational purposes, so they're going to
bring it to schools and things like that. They had three requests for the design that it be
transportable, lightweight, and that when the paddle is on the stand itself,
it's easy to remove. So I've come up with a design and we'll see how it goes.
I didn't film most of this on camera, but it was just super finicky. So this was my first
measured piece. I've made a prototype here on the bandsaw with a little bit of sanding. I got it to
fit, but these aren't wide enough. So I'm going to cut one more and it's going to be just a little
completely because I want to minimize the angle that it leaves inside of the cut. Once it's in,
I will shut off the saw, set up a stop block here on the fence,
and then I can repeat that cut over and over again to this same spot right here.
So I've managed to get a really nice finish on this. I'm super happy with that and the parts
slip in and out pretty easily. One of the things that I was kind of going back and thinking about
was that they wanted this thing to be transportable. It's nice, it comes apart,
but it's a little awkward to carry all three parts together. So I was looking around the shop
and things that I might have that might make it easier. I was playing around with how the parts
might go together. I went to my local fabric store and they have this, which is white velcro,
which has the hook on one side and the loop on the other side. So you can use it to
strap things to. So I think what I'm going to do is on the underside of this, attach some of this
and I hope you guys enjoyed that. Yeah, it's a little bit of a strange build,
but it could totally be used as a guitar stand. And it's really funny, no adjustments necessary.
It totally fits. The velcro works super well. It was kind of like a last minute add-on and
I really love it. It's going to make it a lot easier for them to carry around.
I built another project for them this week as well. Unfortunately, I didn't have time to record
a video of the build for this. Just not enough time, but it's a prize wheel built from scratch.
You can see this on my Instagram. So I highlighted it in my stories, the whole build. So if you're
curious how this thing was made, go check that out there. Yeah, if you guys have any questions on this,
feel free to ask them in the comments down below. Pick up a t-shirt. I've got them in the shop now
and yeah, I'll catch you guys on the next one. Thanks a lot. Bye.
Bye.
