The DIY 7$ Canoe Paddle from Roof Battens - How to make - with just some common tools

Simpler and Simpler
136 followers
10 Video Views·Oct 23, 2022
Hello YouTube, welcome to another video about my roof batten canoe project.
In the last videos I showed you how I made such a canoe from nothing else than roof battens,
boats varnish and adhesive. My aim was that everyone can do this project within two days
and I tried to keep the material cost under 150 Swiss francs, dollars or euros. For that
I had to simplify the design as much as possible. Because of the flat bottom and the 90 degree
angle between bottom and sidewall, this canoe is much easier to craft than a professional canoe
with a much more complicated cross section. A lot of people wrote me a comment because they expected
that I don't have enough tipping stability. I was on a test drive last week and to be honest
yes, the tipping stability is probably not as good as on a professional canoe.
But as long as you don't have strong current or big waves, the tipping stability is good enough,
at least for me. As the canoe was done, the only logical step was to make a paddle by myself
with nothing else than roof battens, boats varnish and adhesive. The typical paddle for such a
Canadian canoe is a single blade paddle. In this video I want to show you how I made such a single
blade paddle. For that I needed nothing else than leftovers from the canoe. So I didn't have to buy
anything. If you have to buy all materials new because you don't have any leftovers from the
canoe, the paddle will cost about 10 euros, Swiss francs or dollars. These 10 bucks are not calculated
with the full price of a new tin of boats varnish or a new tube of adhesive. I just took the
share cost from the amount of material you really use for making this paddle. I also wanted to use
the same tools as on the boat. That means a hand plane, belt grinder, jigsaw, some screw clamps and my
Victorinox Ranger Grip 79. My plan was to thin out the blade part of the paddle with the hand plane.
But after two minutes work I realized that this is almost impossible because of the many branch
knots in the wood. But don't be worried if you don't have a bandsaw. Just make sure that you have
as less and as small branch knots as possible when you are choosing the wood. Like this you can achieve
your goal also without bandsaw, just with a hand plane. Now let me tell you something about the
dimensions of this paddle. The total length of this paddle is 145 centimeters. This is from the
floor to my chin. But this is just the thumb rule. So the perfect length for your paddle you have to
try out. The length of the blade part is 60 centimeters and the width is 22 centimeters.
The weight of the paddle is about 1050 grams. This is maybe 20 percent more than a normal
paddle you can buy. But a self-made paddle is more worth for me than a super light paddle.
So I don't have to cross the ocean. Now I want to show you how I made this paddle. So my friends
that's it for today. I hope this was interesting for you. Thanks a lot for watching. Don't forget
to subscribe to my channel and see you next Friday. Ciao
