Big Wall Bible #7 of 14 - http://www.bigwalls.com It's "knot" that hard to learn how to twist your rope in all the ways you need to go up a wall. This ties together a foundation for the next chapters so we can just show you what to do without getting stuck on knot basics. Knots are actually quite easy though. There are about 5 families of knots you will use and honestly only 3 would get you by. Hitches are nothing unless you have something in them and there are only 3 of those you need to know. Friction hitches let you bite a rope with a smaller rope and they are a handy and lightweight tool to have. We also cover anchor concepts so you know what to aim for when building anchors.
***Note: At 11 minutes it is a Smith Lock Backup, not a Scott's Lock Backup on the bowline
Well, I'm kind of trapped in this video with Ryan.
This is not a class on Shabari. I think he thinks this is a catchy intro,
but we're going to show you knots in this episode because we like to cram too many
things into one video in this How Not to Big Wall series. And this, ironically,
is just a small part of the bigger project. In the Big Wall Bible, you will find other people
contributing thoughts and the way they like their rack and the way they go up things and what they
cook and prepare for food, which I can smell your pizza right now. And so that's what's on my mind.
It is great. And so it's actually really cool. I'm actually really excited how this course has
been going so far as we've been filming because I think it's going to allow people to contribute
information to double quadruple what we're even providing. Yep. And I hope you guys are realizing
that even amongst us, we do things in completely different ways. Super different. We've never
together. Yeah. And you're going to. I think that's a blessing. Yeah. Thank goodness.
So hopefully you've been doing things differently, too, and staying safe out there while doing it,
too. Yeah. And the overall theme across this entire How Not to Big Wall course is to practice
everything you can at home, which is ninety five percent of what you're going to go do.
How long did you sleep in your portal edge in Minnesota? Fun fact. I actually love big
walling so much that I got rid of my bed for an entire year and just slept on my portal edge
for an entire year just for fun. That doesn't sound like fun. You don't have to be that prepared,
but I think you prepared about five years, five years. Yeah. So when he did his walls,
he was successful. And I had a hard learning curve because I just showed up and struggled.
In case for some reason, this is the first video you stumbled upon on this channel because I had
a clever thumbnail. This is a A to Z content of the How Not to Big Wall course inside of a channel
that has four hundred other way more entertaining episodes on like the myth busters of like climbing
gear. We break gear fear for all extreme sports. But sometimes our videos are going to be a little
bit longer, which in that case will be all timestamp below. So you can skip around, skip
past the knots if you know, or is that how timestamps work? Yeah. I was like pointing
to the timestamps that are down, down there. Wow. And so we're just going to cover what you're
using in a big wall scenario. And we realized we couldn't do that without tying some knots.
What do I have here or what do I have here? Oh, I don't know. What do you want to share first?
Let's talk about this. There are two coalitions in South Dakota. On the western side is the Black
Hills Climbing Coalition. On the east side is our coalition that we just started back in May
called the Great Plains Climbing Coalition. If you'd like to check this one out, this is on
the western side. They're doing great efforts in replacing old bolts since the 1950s, doing a lot
of conservation efforts because with starting crags that are developing, they need better trail
maintenance and access issues. And the Black Hills Climbing Coalition is looking for donations. So
check out their website and support a coalition that's not in your area. Crags don't develop
themselves. Free content isn't free to make. Contribute and give back in the way that you can.
On this channel, you can get some merch at hownoffswag.com. And if 1,000 people or 1%
of the audience donated $1 per episode from the time I look like a big YouTuber to where I
actually become a big YouTuber, this is financially viable. Right now, this is not financially viable
and I literally go backwards every month to make this happen, but I'm so excited about what we're
doing here and what it could mean for the big wall community, slackline community, the caving
and canyon communities that it's worth transitioning because I know if I show enough value,
I believe enough people will step up just like you guys and your coalition are going to change
enough of your area that people eventually step up, but it's a chicken and the egg sort of a thing.
Yep. Rocky Talkie made an investment into what we're doing here because they also believe in
this big wall course. And Jeremiah and I spent about an hour before turning on this camera
for this next section arguing about rope communication. I'm like, all of this is
irrelevant if you can just go and say exactly what you mean. They even give you a 10% discount
if you go to rockytalkie.com slash how not to. So I really, really appreciate what they're doing
in this channel to help you guys out, have this free content. Now, it's very good about
practicing. We talked about that a lot. Take a rope and time yourself how fast, maybe 10 pieces
of some cheap rope and lay it all out and see if you can play a game of how fast you can tie
all these knots back to back to back to back. And if you can't do them all fast and bomber,
then can you do it when you're tired, thirsty, stressed, and bonking?
Can you do it with a blindfold on? Yes. Can you identify if your partner
tied it right with a blindfold on? Or in other words, your head let and died.
I've had to check if I was on rappel properly and I traced my finger and I was not in the carabiner.
I only went through the ATC hole. I missed the clip. If I leaned back, I would have been dead.
My friend also did that. I did that too. Yeah. It's really good to be able to like,
wow. Where do most accidents happen on? It's coming down. It's on a rappel. It
blows my mind in mountaineering. They made it to the top and then died. And you're just like,
holy cow. So we're going to have a whole video on bailing and getting off a wall.
All right, let's get started on this anchor pillar. I'm sick and tired of us talking.
But this is how long it takes to do changeovers. That's very true. Not if you're climbing with me.
Maybe if it takes you three days to get up Zodiac. Oh, took him a day and a half. I'm going
to show you a couple applications for overhand knots. Overhand on a bite would be to take a bite
and instead of a figure eight, you're simply just sticking in that loop. It's a very simple knot.
This is something I would do if I just want to clip something to my harness,
just to hold up a strand of rope. I'm not going to fix my partner with something like this.
So you want 18 inches of tail when you're setting up to bail.
So if you're tying the two ropes you have together in order to make full 60 meter repels,
you want 18 inches of tail and then you tie just a simple, the simplest knot there is,
an overhand. And that is called a EDK or an overhand knot. EDK stands for European Death
Knot. If you put enough force on this, this will unroll and it'll unroll and unroll and unroll
until it slips. So it is sketchy if you don't have enough tail, but it's super good enough and
I do it all the time. Another thing it does is it keeps it flat against the rock. And that is
something that's nice. And it's an irregular knot, which means it's going to not get stuck in a crack
as easily. So this is a sewn sling. It's also Dyneema. And this is a piece of nylon webbing.
And there is a way to make this into a continuous sling. It's called a water knot, which basically
is a overhand knot and then you follow it through. For some reason they call it a water knot and
technically it's a bend, if I'm not mistaken, because it joins two ends together. But it's
specifically best for flat webbing, not ropes. And there you go. You've got some two tails.
And there is a beer knot that you can Google and you can eliminate the tails where they're
stuffed inside of this tubular webbing. That's not the part of this course that we care about.
Figure of eight on a bite means you have a bite or a bend in the rope. And instead of coming around
and doing what would be an overhand is you go around one more twist and you go like this. And
that is one thing you can do to fix the person coming up. Now, if you want to tie a figure eight
on something that doesn't open, like either my harness as a way to tie in, I hope you know how
to tie in into a harness if you're doing a big wall or this ring is I will do half the figure
eight and then I will run it through that item. Trying to keep the audio to a minimum and failed
miserably. And then I'm going to trace this and follow it all the way back through. This is the
kind of stuff you can learn at a climbing gym, but at least you know that this is also an eight.
You want to have at least a fist of tail, a way that I like to finish my figure eight is to take
the tail. And sometimes it's just don't like it dangling around. And this is more than a fist.
So it's long enough is to continue to trace it. So it goes around like this. So I go around and
then it goes up. And so I go up and the tail basically goes up and it goes with your dress,
not just fine. And that is called a Yosemite finish. One of my favorite types of figure eight
is also on a bite, but you have a lot of extra rope here. Instead of putting the bite through
the twisted hole here at the end is you stick another bite through there. And then before you
pull that rope all the way through, you flip it over itself. And those two strands are now
the strands you're going to clip. And dressing your knot is just making sure that it looks nice
and even and whatever. It makes it easier to untie later. It doesn't always affect the strength.
Now I got two bunny ears. So what I can do with that is I can clip and equalize this by pulling
this bottom strand and then boom. And they're mostly equalized, which is super good. This is
not my favorite way to tie two ropes together, but it is in the eight family where you can trace
that eight through one rope and you can do it and you can trace it with a different rope. And this
is a safe way to join two ropes together. If you don't like the other ways we're going to show you
in this video, cinch it up, maybe dress it. If you don't dress it, the knot people will leave
extra comments, which is great for the algorithm. So I'm going to show a couple different series
a bowline. This one is my favorite. It's called a snap bowline. You have the working end here.
You're going to pass through and then with the standing end, you're going to do a little twist
in it. So notice that the standing end is the one that's on top right now. Then I'm going to pass it
behind the knot, creating a little bite. What I'm going to do with the working end is to pass it
through that bite and back to itself. Then you're going to continue to hold on to the working end
and then you're going to pull the other end down. Now this is a bowline without a backup and as
everybody knows with a bowline, you must tie a backup. I'm going to show my favorite when you
have a shorter amount of tail here, how to do a backup. You're going to take the working end over
the band that's trapping it and you're looking into this triangle. So you're going to pass it
into the triangle and then back out towards the standing end. That is called a smith's lock and
that's a nice way to finish a bowline with a backup with a short tail. When you don't have
a short tail but instead you have a long tail, doing something like a fisherman's will suffice,
we will cover that in a little bit. This is a nice way to finish and backup a bowline.
The Yosemite bowline is a very similar type of bowline, but it's just a backup. It's a way to
finish it. All it is, is you essentially still want to come out this back end. You want to
kind of follow it in the same direction that the rope is going. Because it's going around that way,
I'm going to take the back end of the rope and go back side and then back out towards the
standing end and there's your Yosemite backup. This one is not as secure as a smith's lock.
Smith's lock is really slick and uses very little rope for that. But the whole reason why I showed
three different backups to a bowline is because a bowline, the positive of it, is it's very easy
to untie. The downside to a bowline is that it's very easy to untie. So with that, you really want
to make sure that you know how to back it up. Because if you were to use this as a way to fix
your rope and they're jugging on it and it's going up and down, up and down, up and down,
up and down. Let's see if I can get it to eventually do it. Or even if it got caught
on something very easily, it'd be very easy for the whole knot. There you go. Another risk with
the bowline here is that if you clip into it in the wrong location, you should not do what's
called ring loading, which is actually clipping it in over here. And as you can see, if I clipped
up above, it can actually make the whole knot fail. So you want to make sure that you're not
clipping in up top to a bowline there. It's just a way to be able to adhere the rope to the wall,
but always make sure that there's a backup on it. This has no backup. The next bowline I'm
going to show is how to do a bowline on a bite. So you would need something to be able to clip
it to. It's not something you run through. So a bowline on a bite is like an overhand knot.
What you do with an overhand knot is it's just like a figure eight knot, but instead of coming
all the way on the backside, you just go ahead and go all the way up. Then here's the trick.
It's the same strands that create the bite, as you can see, holding it up here. Here's the bite.
Here's the two strands. You're going to come towards those two, and you're going to pull
those up. That right there still creates a bowline knot, but now you have a two-stranded rope. Not
a redundant rope, but a two-stranded bowline. Very important to know that this is not redundant.
You should still back it up, and you can do a backup like this if you would like.
Just a double finishing knot. Now we're going to show you three similar knots that accomplish very
different things. If you don't want to repel off the end of your rope, you need a stopper knot.
You should do that all the time if you're climbing. What you're going to do is take the
working end of the rope, and you're going to spin it around the standing end of the rope.
You can do two or three times, and then you take the tail, and you point it back down the direction
it was, and it creates this stopper knot. That's what we call when we put this at the end of the
rope. What's cool is if you make a bite first, where I do the bite, and then I take and I do
the same thing around all of that, and I put the tail back down from where it originally came from,
this is going to cinch down whatever you tied it to, keeping the minimal distance between the knot
and the object you're tying to. It's one of the most difficult knots to untie once it's been
loaded quite a lot, and it's also called a slip knot if there's nothing in it. If I want to join
the two ends of this rope or join two ropes together, I could tie what is called a fisherman's
knot, and you could do a double or triple fisherman's. That depends how many times you've
wrapped around. What you do is you overlay these two working ends together, and you basically,
you guessed it, do the same thing. In this case, I'm only going to do a double,
but you have to do it on the other side. Same thing. You go once, you go twice, and you don't
need any longer of tails than I have here, and when you pull the standing end, it pulls them
together. Now, it is nice when you get them to sit nicely with each other, but dressing knots is
more of a formality than it is complete safety, unless you're doing things like bullens. It just
sits wonky otherwise. But this, I did a 700-foot rope swing on this. Problem is, I couldn't untie
it when I was done, but I knew this knot, and I liked jumping on it. So now I have a loop or a way
to tie two ropes together. So now I'm going to show you a butterfly knot that can be pulled in
either direction and still retain all of its strength. Let's just start with a figure eight
to show you what I mean about this problem it's solving. If these strands were here,
you don't really want to pull this knot this way or this knot this way. You can see how
janky it is. But wait, there's more. We have a solution for that. One way of tying that is to
take the working strand, and you wrap it very much like a stopper knot. What I'm going to do is take
this middle one, and there's so many ways of doing this, and I'm going to go down and through the
hole. And now this is my clip-in point, and I'm going to dress the knot. Now you can make a butterfly
knot all sorts of heights and sizes, but that is a butterfly knot. If I twist that, then this strand
is going this way, and this strand is going this way, and guess what? People think that matters,
and it doesn't. So now I can, or in a vertical world, pull this way on it, or I can pull this
way on it. Now you technically can ring load this or pull on both directions. It's not super great
for that, but it's not going to kill you. I'm going to rant real quick. I don't like to tie
two ends with a butterfly knot with the tail sticking out, because when I pull it to failure,
the tails always slip through, sometimes at a low force, sometimes at a high force. Depends
how long the tails are. I suppose the EDK does the same thing, but it's not that great of a bend,
but it's an amazing tool for the midline of your rope, and you can pull it up or down,
because sometimes you're pulling a bag up, sometimes your partner's pulling the knot down.
Rant number 3,245. You can trust an alpine butterfly in this orientation when your rope
is core shot. So right now it's holding my life just fine, and I'm trusting it.
Right now I'm 2,000 feet off the ground, right? Well, I want to show you right now that if I cut
this while I'm on it, and I'm core shotting this right now, I'm okay right now. Okay? So right now,
you know, core shot, it's doing its job, right? Okay? And now I'm really going to actually cut
the other direction. That even with me on the rope, it is still going to hold me,
which is the whole point of using the alpine butterfly also, is that when you get a core
shot in your rope, it isolates that damaged spot, so you're able to keep going. Now, this has to
stay intact for you to keep using the rest of the rope, but at least you can get back down to the
ground when you're repelling, or if it got damaged on a lower out, wild and over a sharp edge. So
just kind of keep that in mind. Now, obviously, if this comes off and it's no longer weighted,
you can see that the rope is dead, right? Essentially at that point. But while it was
cinched and tight, it will hold you. That doesn't mean that you want to go taking big old whippers
off of it, but at least it'll hold you, and you could repel down and get off the route if you
need to. So I'm going to show you another way to be able to tie an alpine butterfly. It doesn't
need to be in this orientation to tie it, but all I do is I take the strand and I create a bite
really quick, and then I'm going to rotate it two times around. One, two, and I'm trying to keep in
mind the inside circle I'm making. This is going to go around the entire back side, and this hole
that you're creating is where this bite is going to go into. So you're going to pass that back in
there, tighten it down, and there's your alpine butterfly. This is the rope that was recently
replaced on the death slabs of Half Dome, where you go directly up to the face from Muir Lake.
And I put a figure eight on this end, kind of a janky figure eight on this end. It's got a little
gnarly spot there, but usually breaks here in the knot. I want to see if, well, if this is bad.
This is isolated twice to this butterfly. I did not tie this. I did not tie that.
Oh, that's good. God, it's still alive. Oh, that was good. Oh, that was amazing.
Ha, that is not very high. Look at that graph. It's strong enough to ascend. Diameter rope used
to be about 18 kilonewtons when it was new. I'm going to show how to do a clove hitch two
different ways. One with your two hands and one with one hand. So the first one that everybody
knows is where you do the twist around and twist around and then tuck behind. You see that one a
lot on Instagram. So that's a two-handed clove. You really want to make sure to cinch it down
and verify that it's cinched down before trusting your life to it. Application, everything. I
literally, I use it literally for everything. Like my all-time favorite one is a clove hitch.
I understand that it's not a knot and that it's not as strong as a figure eight on a bite,
but it literally does a great job and it's super good enough. All right, so next one I like to do
is a single-handed clove. It's not totally single-handed, but the big difference is
facing which way the gate is. You want to take your hand, so if it's my right-facing gate,
my right hand is going to come on the opposite side by the spine with my thumb facing downwards.
Then I'm going to turn my thumb facing upwards and now where my fingers are,
are what's going to push it through the gate. So that's a one-handed clove as well.
So this is where an HMS or a pear-shaped carabiner comes in clutch. It's very similar to a clove by
doing a munter hitch. They're very similar, but there's just one slight difference here.
So with a munter hitch, you can still start the munter the same way as you did the clove with
thumb down on the opposite side of the gate, so by the spine. Come up, but instead of rotating it
here where your fingers are, all you're going to do is keep going and clip that. That becomes a
munter. So if I was to automatically start pulling on this, it's not going to cinch. Instead it's
going to flip. So that is a munter. On a big wall, the biggest application to a munter is for
lowering out your haul bag or lowering out yourself on a piece. I use this quite a lot on
a big wall. It's like one of the most used things. So what I do for my munter, if I'm just doing it
in my hand, is I start it the same as a clove again, rotate, but then I just go ahead and take this and
I bring it up the back side. So you can kind of see it kind of creates that little loop there.
So that's how I do my munter. 90% of the time that's actually how I do my munters.
The reason why I like to do it that way is I can already reposition so it's already in a
correct flipping orientation. That's why I like that. And what it does is it creates like a
belaying opportunity with only the locker for any objects you need to move and belay,
but without a belay device. The downsides to a munter is that it can put twist in the rope.
To prevent the twist in the rope, so I'm going to have it flip here so it'll be an easier orientation,
is this strand that would be, I don't know, this strand right here. This is the loaded
strand. You want to come around on the front side so it looks very similar and then come up above
and clip. And what that does is it still allows for the flipping opportunity, but any twist that
you put into it, it'll automatically untwist the rope. It adds a lot of friction though, so just be
aware of that. It's also a great way to use for when you're rappelling and you drop an ATC or
your rappelling device. With this, because it is such high in friction, it is very diameter dependent.
So if you use like an 11 millimeter rope, it'll be a lot more friction and won't flip it as well
or lower as well. So when you look at the differences between those two, you can see that
this has a lot smaller saddle compared to the HMS one. So never use a little one like this.
Never use a D shape. Don't use little beaners. Use big beaners if you're going to use a munter.
This is an HMS carabiner or otherwise known as a pear-shaped carabiner. I'm going to show how to
do a girth hitch, which is very similar to a clove hitch, but the ropes are really just oriented in
opposite directions. What I do is I put them in my hands like this with my palms facing upwards
and then all I do is I turn my thumbs to face each other. So now you'll see the two strands
are very close to each other. If you bring them together, that becomes a girth hitch.
This is what a lot of people accidentally tie when they mean to do a clove hitch.
This is not the same as a clove hitch. Is that a secure? No, and it will slip a lot easier and
should not be used as a way to tie your anchor. I hate master point girth hitches. I think they're
awful and I think the clove one is way better. I'm going to do a girth hitch with a single sling
here because I'm going to show another application here in a sec, is that you just pass the bite
of the loop through and then pass it through that bite and there's your girth. This one I
absolutely love as a way to conjoin two pieces together. So I'm going to pull and make sure that
the stitching is far away from where I'm going to be tying this. All I do is I take my big locker
and I clip it to essentially the whole thing. When I grab this strand with my thumb,
I'm going to push away but I'm also going to pull down with my fingers and where my fingers are,
I need to rotate my right hand so that nose can go where those fingers are. This is a nice way to
be able to conjoin two pieces but understand that this also does not have a shelf. So this is not
clippable. This is not a shelf. This is your master point. It's just a metal master point,
which means you can clip metal to metal. It's okay people to clip metal to metal. Metal touching
metal is not the problem when you hear the phrase metal on metal is bad. What happens is when you're
linking draw to draw to draw to draw or carabiner carabiner carabiner to extend things, you extend
things with slings because if things get twisted, what happens is you can basically, it's pretty
reliable when I do it. It puts on the gate. It opens it up. Soft on soft or ropes touching ropes
is not bad. It's when a rope is rubbing over a rope is where a rope can cut another rope. So just
understand these phrases that are kind of thrown around a little loose that soft on soft is bad
and metal on metal is bad. This is why, and it's good to be aware of it. Since this is an anchor
video, I want to make sure it's very very clear that you can't clip this because if something
were to come off, fail or whatever, it's going to slide off and you will die. It's like the opposite
of redundancy. It's 50% as reliable. If you are going to clip this in a way that is a sliding X,
you twist one strand and you clip it and you can slide it back and forth and when it,
you know, if something were to happen, it's still attached and that's something you really need to
understand. Context and something I don't think Jeremiah can muster because he doesn't like the
anchor is it's pretty common to have people take this and then put it over the carabiner,
but just so you understand, that's another way the girth hitch is made and we did a video that
showed that if a strand got cut and pulled hard enough, dyneema is slippery and it'll all slip
out and come undone, but usually the knot gets cinched up so much and you're not putting enough
force on it, you're not going to die and usually what you're trying to prevent is if this piece
blows, what's going to happen is the carabiner is basically going to get jammed up in there.
So it's super good enough. Yan Camu from Bliss Climbing has a lot of solo climbing information
and what he did was he did the sliding X and then he put it through and that prevented the
problem I invented to get a lot of clicks on my video. So don't worry too much about little
nuances. This is just another quiver in your arrow. So this is a sliding X in a Y configuration
which is actually putting more force on the stuff. The more narrow these angles are,
the closer the bolts are together, the more it's going to share the load 50-50% roughly
and the wider they are is you're going to basically get a slack line and it's going to
exponentially make the force, but honestly it's not so exponential you're going to blow
like a bolt necessarily, but if you're putting a cam into this crack and a cam into this crack,
it actually can make a difference. Now what you don't want to do,
and if we're going to make a big wheel course we got to cover it, an American Death Triangle.
This had a lot of interesting myths around it where this being 180 degrees, which in theory
adds an infinite amount of force, that's not exactly how it works and we have a whole video on
why that is. Now it is true that it adds more force in the system than the load you're putting
on it. Does that matter? Not if you're just hauling or jugging, but it's like so much better.
You're talking a 44 kilonewton anchor at this point, right? Because this is 20 kilonewtons,
this is 20, it's going to break here, and this sling if pulled just straight is 22 kilonewtons
and you're only putting let's say one, two, three, four at the most on this kind of stuff
if you're hauling and jugging or whatever. But you get 44 out of this and then you're getting like
not 44. Not quite redundant. If this gets cut, you're done. I guess if it gets cut up here,
you're done too. So the moral of the story, don't do this. Just don't even do it. Go check out our
other video about it. Welcome to the world's smallest haul bag. I want to dock this haul
bag to here and I'm going to use the munter that you saw earlier and then I'm going to lock it off
with what's called a mule overhand, a munter mule overhand MMO. I don't want to pull on this tail
once I have it tied or it's going to rotate. I want this to already be pre-rotated before I tie
my mule, which is this loop that I'm going to go from behind and grab a bite and this is what's
going to lock that off. And I pull enough bite in order to go around the whole thing and go down.
If I went around twice, it would be very much like all those fishermen knots we showed you.
That's not going anywhere. But when I wanted to go somewhere, because Jeremiah starts hauling this
for the next pitch, then this being maybe 200 pounds sometimes, is I can't lift it to get it
off my anchor. I could pop this and it can start to lower and I can belay it with this nice HMS
carabiner that has the space and my bag can be lowered until it's fully on Jeremiah. And when
it's loose, depending how long my tail is, I'll just let it repel off the end of the rope and it'll
keep going. So that's where you see one of these knots actually applied in what you're going to
see in our anchor setup. All right, I'm going to show a docking system that's similar to Ryan's,
but a little bit different. It's actually also very similar to a VT Prusik, or also compared
to the Beal Escaper, it's going to look very similar. It's actually called the Barber Pole
or also called the Load Release. It's going to start the same way, but instead it's going to
have two ropes. So you'll notice here that it is attached with a Super Bunny ears and then I have
two strands that are of equal length. I'm going to be attaching it with a munter.
So I'm going to do my munter a little bit different than the way Ryan did it earlier.
I'm going to go around the back side and then clip it through the front side. So that's where
we're starting. There's the munter. Then I'm going to take one of those strands and the other strand
and have them on opposite sides and then cross against the front, cross around the back, cross
around the front, cross around the back. And you're going to do this at least five times.
The more heavy the bag is, you might want more. So do as many as you need. Just keep going around
the front and the back. But then to finish it off, you're going to do what's called a square
knot. So I do want to show in detail really close right here, the differences between a real square
knot and I don't know. I don't know what the other one's called. But you'll start it off by just
doing a simple overhand like that. And then a square knot is not this. This is not a square knot.
What you'll notice is notice that this strand is on top and this strand is now going down below.
That is not correct. A square knot needs to go the other direction. Instead, you'll notice that
these two strands are now touching each other and these two strands are touching each other.
This is a square knot. It'll cinch as it gets pulled apart. And always lock that down for the
troll patrol. So that's my docking system that I use. But then it's also very similar to what
Ryan does when it is ready to do a lower out. You undo the square knot. Slowly undo the barber pull.
Keep on going, keeping a firm hand. You don't want to let it go because it at this point is
just being held on with friction. That is what's holding it right now. And then once you get really
close, you really want to make sure you have a really good firm hand. And then same thing, the bag
will get lowered off. But it has just more friction than a single strand than what Ryan had. But also
very similar idea. It would get lowered off and then the bag goes whoosh. So I'm going to do three
different friction hitches you can use. And this is really well for adding any type of friction,
grabbing onto things. If you drop your sender, you might need to use one of these to go up your
fixed rope. So you can take your prusik loop. And what you're going to do is you're going to pass
it around the rope. And I always grab my knot or my stitching. And the stitching is what's going
to be passing through. So this bite part is going to go inside. One, two, and three. And it all
depends on the diameter of the rope and how many wraps you need. If you want to check out that
episode on how not to highline, I believe that they do do a diameter and prusik loop diameter.
And what they release that and get caught at. So check that one out.
So that is our standard prusik. The nice thing is it grabs in both directions. So go up and down.
And the only way that it'll be able to go down is if you push down. If you pre-cinch it too hard,
it will get stuck so bad that you can't release it very nicely.
I bet. Okay. So there's our prusik. Next one is going to be your climb heist.
So this one, very similar, but you're going to be starting at the top. But instead of going
inside the loop, you're just going to be wrapping it around the rope. So one, two, three. And then
the knot part is going to go up through that loop. And there's your climb heist. Now this one is
really nice for a one directional pull. So in this direction, it, once it cinches down like this,
it won't go down, but it is easy to push up if you need to. So that's kind of a nice one for that.
Correct. All right. Now this one is very, very similar. So just watch how I undo this knot
and we'll go from a climb heist to an auto block. So all I have to do is it goes back up. It comes
out of that hole, but instead now you just clip them and there's your auto block. Now this one,
I personally don't really like an auto block, but it is helpful if you just need to add friction,
but it is not one that I would want to trust my life to. It is one just to add good friction,
but you would add your carabiner to where my finger is right now. And yeah, it might be able
to add just enough friction where you have more control on your repel, but it would not hold your
life in a lifesaving scenario. There's what's called the VT Prusik. And to do another plug,
go check out this channel or this episode. Okay. You got to check out this episode about VT Prusiks.
I still want you to go watch that VT video, but I'm going to give you a little sneak peek.
Brent introduced me to this hitch and Brent made this wall and he let us film this entire course,
even while he was out having so much fun on a salmon river trip that we could still come here
and film while he was gone. So I really appreciate him not only for letting us film here, but showing
me the VT Prusik. What's kind of cool about doing this channel is we're cross pollinating the other
sports, all kind of interconnected. For some reason, some ideas don't get transferred over
the gaps. And so by breaking gear fear for all extreme sports, I get requested to test the VT
Prusik when I have never really seen big wallers do this. And this is an amazing thing. Now,
no, this is two sewing ends rather than a loop. But if I go around three times and then start
this crisscross pattern of a braid, and it's not a lot, you know, going for it other than just,
you see how that was longer? I just wrapped that a little bit more. Then I can take a carabiner
and there's not enough friction maybe that I'd want. This will hold, but if I want more,
I would take this off and I would crisscross it one more time and connect it in the back of the
rope. And now I've got plenty and it goes up super easy. I'll flip this around.
So when you touch this, just so you know, you want to smoke the cigar. You never want to grab
it because if you panic, you'll just start to fall. And what's cool is you can install this
while it's loaded. So if someone's stuck on rappel down there and maybe unconscious and
there's no second rope, um, there was a party in Zion that couldn't get down because the
blayer went underneath the thing. They couldn't get back up. They couldn't get to him. They had
one rope. And so basically this I'm ready. I'm ready. Barely having to touch it. I would not
use just one of these to go down to my Blair. I'd use probably two or one and like moving ascender
one inches. I went down because, um, it is just scary, but this is a solution. And this is what
I carry even on my gym harness, because it's like an ascender in all the things that you can do with
this thing. Um, I can also put it upside down and pull up with it. That's an option too. Yeah,
because what I like is I don't even, I don't have to two handed. I just lift it.
And you can check out our video when it slips on what diameters and what it happens when you
heat up this VT Prusik from blue water. Uh, because as a techno or sheath and won't melt,
um, this is moving along the rope. So it's always touching a new spot on your rope,
but it's touching the same spots on here on the actual Prusik. So, um, it's a really great
material. It's a high-tech stuff. And, um, I think it's worth having.
It has two kilometers on this. It got so hot. It melted the nylon on the inside to the point
it turned to liquid and came through the sheet. And if you live and dream about climbing,
maybe one day someone will want to be your climbing partner.
Oh God. Okay. Like, look at this. I lost all the color in my hand. Oh my God.
They're purple. That is not, that was, that was a bad idea. That was really good.
Wow, dude, maybe I should go first. Yeah, no, you're good. My hands are just fine.
I think that's such a funny intro.