Our Hunger Games inspired bows wouldn't be complete without arrows to go with them, so today we'll be building an arrow like the one Katniss used in the opening scene of the Hunger Games movie. While this is mainly a display arrow, it will shoot and I personally use arrows of this style (minus the chicken feathers) fairly often.
The arrow shaft is a wooden dowel, though any type of shafting can be used. Perfectly straight-grained and flexible 5/16" poplar dowels will work in PVC bows up to 50 pounds. If your bow is heavier, use a stiffer shaft to start with. 3 Rivers Traditional Archery is a great place to find traditional arrow-making supplies.
The broadhead is simple, made from a 20 gauge, 3 and 1/8" x 9" tie plate. The length can vary, the width should be 3 and 1/8". It's a little on the soft side, but still holds a good edge and is fairly durable. Most times the broadhead can be hammered flat if it ever does bend. It works best with soft targets.
The feathers are chicken, which are not my usual fletching material. They bunch up really bad, which is what the movie prop arrows did as well, so here it is a plus. If you plan on using the arrows regularly, I suggest skipping on chicken and the tied hemp twine and just glue on some turkey feathers.
Thanks for watching and enjoy!
Here's a better description of some things you will need as well as links to videos and some items on Amazon.
5/16" hardwood dowel. I suggest poplar as it is very light (even lighter than some common softwoods) but tough and resilient. Make sure the dowel had straight grain with very little to no run-off. It needs to pretty much be perfect. I'll usually find only a few in a box of a hundred. If you are buying online, get some quality port orford cedar arrow shafts instead.
20 gauge, 3 and 1/8" x 9" tie plate. You can also use pallet banding steel or steel plate. A heavier broadhead can be made from 18 and 16 gauge steel and these will be a little less likely to bend. Either way, this is a pretty good broadhead.
I got the chicken feathers from HawaiiArcher84. He sent me a couple bags full as a trade. I wouldn't suggest using chicken feathers all the time, but they do work and if it's all you have this is one way to use them. Either primaries of tail feathers work, just make sure all the feathers on one arrow are from the same side of the bird.
All right, so now we're going to be fletching the arrow. Normally I use turkey feathers just
because turkey feathers are a little more durable than a lot of other feathers out there.
But if you've seen the Hunger Games and you've seen the arrows that Katniss uses in the very
beginning of the movie, the feathers are really tattered and they almost look like
feathers from smaller birds. So today I'm going to be using chicken feathers.
These are three chicken tail feathers that I got from Hawaii Archer, or John.
And so we did a little trade for these a while back. So we're going to end up with something
like this. So you can see the feather doesn't really hold together very well.
And that's, you know, if you've seen the movie, this is what her feathers look like.
We're going to be using these to complete our arrow. Now the first thing you want to do is,
I like to make sure that my feathers are all going the same side. So you can tell
just because of the way they're oriented, and they're pretty much identical, that they were
all from the same part of the tail. Now what you want to do is you take one of your feathers
and I'm just going to be stripping them. So you start from the top, firmly grip,
and then just peel it. Peel all the way down, pick off from where it stopped, peel down. Okay,
so there we go. So now that we've peeled this down, what I'm going to do is I'm going to cut
the feather here and right under here. I'm going to do this to the rest of my feathers,
and then we're going to go ahead and put them on the arrow. So I'm going to do this to the
other feathers. I'm going to trim them, and then we're going to go put them on the arrow.
Okay, so I'm going to be applying these feathers by hand. Now this arrow is mainly going to be
decorative. Of course, you can shoot it, but first and foremost, it's mainly a decorative
arrow. So I'm just going to be super gluing the feathers on. So you've got the feather,
like I said, we'll just strip the one side down. So you're going to cut right about there
so you get a good start to it, and then right where that little poof is,
just want to go and snip it right there. So now what you do is you just go ahead
and apply a little bit of super glue to the arrow. So you don't need to use a lot,
just a little bit. You just want to get a little bit of glue on the feather and take your arrow.
Now one thing I did, you see I wrapped up here. I did the same thing, and I wrapped for about,
I'd say about three-eighths of an inch. So what this is going to do is keep this from splitting.
What you want to do is take your feather, start by looking at your arrow, and then
you want to put one perpendicular to your nock. Your first feather will be perpendicular to your
nock. Just go ahead and get it on there. All right, okay. So here you can see I've got the feather on
and it's perpendicular to the nock here. So the other two feathers we're going to glue on
at about 120 degrees away on both sides. Okay, so here's the feathers on there.
See how it looks? Now chicken feathers and, you know, basically smaller bird feathers in general
will do this if you go against the grain a little bit. They'll kind of bunch up and get all ratty.
There's really not much you can do about it, but since that's the effect we're going for,
it's pretty much perfect. So here it is. Now what we're going to do is clean up the ends here
and then we're going to wrap it. Okay, you want to take a sharp knife,
and you want to take the end of this here, and you want to gently, very gently, sort of
cut the feather. You see that? So what we've done is that the feather is less likely to catch.
I'm going to do that for the three feathers right here.
There we go. All right, now we're going to be tying this. I'm going to be using
some brown hemp. What I thought was interesting about the prop arrows that were used
that they were actually tied in places. What we do is we start here,
wrap over the arrow, just a simple overhand knot, and you just want to tighten it. Now this
first one, we want to make sure that we get it on the very front of the arrow. This will help keep
the fronts from lifting. One thing too, you want to look down your arrow and figure out which side
is going to touch the bow. You want to make sure that this knot here does not rest against the bow
or it's going to get abraded down. The way the arrows in the movie were wrapped is that they
were actually tied like this. So you tie it once. Tie it as tight as you can. Then you want to go
and just double up the knot. So just tie it once more. Make sure it's tight. There it is.
You just go back. You snip those. You want to leave about a quarter of an inch on either side.
There it is. So there are actually three or four wraps on this arrow. It depends.
Different arrows had slightly different wrappings on them. So I'm going to go finish wrapping this
arrow and then I'll show you what that looks like. All right, here's the finished fletching.
So you can see I've got my wraps on here.
Let's see how it lines up. Here's the finished arrow. Now if you wanted to just keep it up on
display, just leave it as is and keep the point nice and dull. But if you want to use this,
then what I'm going to do is I'm just going to sharpen this up and show you what that looks like.
It's very simple. Okay, so I've gone ahead and sharpened this. You can see
it's got a nice little bevel on both sides. You can see that. Now one thing that I do on
my broadheads is that on the very tip, if you can see, I actually went really quick
and ground it this way. So what I want to do is I want to take off that very
tip because that tip is usually a good place where it will break or roll over. This just
gives the tip a little more strength and you have an extra cutting surface right there.
So I really like doing that on broadheads like this where pretty much all you have
is this. There's really no reinforcements on here.
So you want to give your point all the advantages you can. So here we go.
So all that's left is to shoot this for you guys. So here we go.