Shooting a Hunger Games District 12 Arrow

Part 1 -- Preparing the Arrow Shaft - http://youtu.be/fF-aUZu3_js
Part 2 -- Making and Hafting the Broadhead - http://youtu.be/jmIaD6rIZkY
Part 3 -- Fletching the Arrow - http://youtu.be/2UrKk3rJIkQ
Part 4 -- Shooting - http://youtu.be/GvocmM3wzM0
Our Hunger Games inspired bows wouldn't be complete without arrows to go with them, so today we'll be building an arrow like the one Katniss used in the opening scene of the Hunger Games movie. While this is mainly a display arrow, it will shoot and I personally use arrows of this style (minus the chicken feathers) fairly often.
The arrow shaft is a wooden dowel, though any type of shafting can be used. Perfectly straight-grained and flexible 5/16" poplar dowels will work in PVC bows up to 50 pounds. If your bow is heavier, use a stiffer shaft to start with. 3 Rivers Traditional Archery is a great place to find traditional arrow-making supplies.
The broadhead is simple, made from a 20 gauge, 3 and 1/8" x 9" tie plate. The length can vary, the width should be 3 and 1/8". It's a little on the soft side, but still holds a good edge and is fairly durable. Most times the broadhead can be hammered flat if it ever does bend. It works best with soft targets.
The feathers are chicken, which are not my usual fletching material. They bunch up really bad, which is what the movie prop arrows did as well, so here it is a plus. If you plan on using the arrows regularly, I suggest skipping on chicken and the tied hemp twine and just glue on some turkey feathers.
Thanks for watching and enjoy!
Here's a better description of some things you will need as well as links to videos and some items on Amazon.
5/16" hardwood dowel. I suggest poplar as it is very light (even lighter than some common softwoods) but tough and resilient. Make sure the dowel had straight grain with very little to no run-off. It needs to pretty much be perfect. I'll usually find only a few in a box of a hundred. If you are buying online, get some quality port orford cedar arrow shafts instead.
20 gauge, 3 and 1/8" x 9" tie plate. You can also use pallet banding steel or steel plate. A heavier broadhead can be made from 18 and 16 gauge steel and these will be a little less likely to bend. Either way, this is a pretty good broadhead.
I got the chicken feathers from HawaiiArcher84. He sent me a couple bags full as a trade. I wouldn't suggest using chicken feathers all the time, but they do work and if it's all you have this is one way to use them. Either primaries of tail feathers work, just make sure all the feathers on one arrow are from the same side of the bird.
Nylon Thread for Wrapping - http://www.amazon.com/dp/B00114Q1U2/?tag=backyardbowye-20
My Books
Simple PVC Pipe Bows - http://www.amazon.com/dp/1478140917/?tag=backyardbowye-20
Take-Down Archery - http://www.amazon.com/dp/1479348481/?tag=backyardbowye-20
The Impossible Bow - http://www.amazon.com/dp/098324815X/?tag=backyardbowye-20
The Backyard Bowyer - http://www.amazon.com/dp/0983248109/?tag=backyardbowye-20
