271. Trimming a Thin-necked Bottle on a Chuck with Hsin-Chuen Lin 林新春 小口瓶修坯示範

Soul of Siberia
114 followers
4 Video Views·Dec 11, 2022
To see or buy my finished work and pottery tools, please visit my ETSY shop:
http://www.etsy.com/shop/hsinchuen
To watch more of my throwing videos, please visit my channel:
http://www.youtube.com/user/hsinchuen/videos
To learn more about my back ground, please visit my Website:
www.mypots.net
It's coming March 22nd to 24th. I will be at the NCCA which is going to take place in Portland.
It's a clay conference, national conference. I will be at my booth number 701 selling my tools.
Here's the list of my stainless trimming tools. A set of 10. I made it myself.
It's very sharp and very useful for all different kind of trimming projects.
So this is the trimming tools and also recently I have been
invent a measuring tool that you will be able to measure the thickness of the bottom. Usually
by just looking at it there it's hard to gauge how thick the bottom is. But with my measuring tool
you can measure the inside and you got a reading. I have put the ruler here right in the middle.
And also you can pull it out and then I measure the outside.
So you get the difference of the measuring and you subtract the outside part from the
inside part and you get the thickness. So this is my invention for making the
trimming job easier and you don't go through your part or you don't leave your bottom too thick.
You got exactly the reading. So this is a very useful tool to use. I will be
selling my measuring tool as well in Enseica. Also here is the
wooden rib. The ribs I got two different sizes. Four inches and it's from a different wood
and also five inches which you can make perfect bowls and smaller bowl, larger bowl and even a
platter. This is a very good special design for making nice and perfect bowls. So I hope to see
you there. I made this thin neck bottle the other day and I told you that I'm going to show you how
I trim it. To be able to trim this kind of narrow top that is very hard for you try to secure it
without tipping over. So actually if you have made something like this you need to make a chuck.
Okay here I the same day I throw a chuck. It's made out of the same clay. It's just a small
cylinder without a button and after you cut it and you let it dry. So this is about the same dryness
the same drying stage which I call this later stage that you will be able to trim it.
This will be able to fit in here so your base will be wider.
So you can see that how it fits right there on the chuck and with this chuck that is wider
so that your piece will be holding better and stronger without tipping over.
So yeah trimming something that is that's a very small opening and also before I trim
since you cannot look at inside and you don't know how thick the bottom is
and I told you that I would like to show you how to use my measuring tool that I invented.
Two pieces of stainless steel measuring ruler here. You can measure the inside part
which I have a hole in the center and then you measure the outside part. So you've got
the reading both reading and then you subtract the outside that which it will be larger number
and the inside will be smaller number and you subtract that difference
you come to the thickness. Okay so let's measure the inside.
Okay I don't know if you can see it. My reading here is 180 so to be able to remember it
you can write it down 181. Okay and then since I'm going to cut it so it's okay to
write it down there and then you pull it out and then you insert the metal here on the outside part.
Okay so I don't know if you can see it or not if not if it's too far away to
look at it actually you can just pick it up and we get a reading here.
So my reading here is I come to it's 195.
Okay it's a millimeters system metric system so you can subtract the 195 to 181.
So it comes to 14 mm. Okay 14 millimeters. 14 millimeters is a little bit
more than half of inch. Okay 14 let me show you. It's about from here to here to my
thumbnail the tip of here to my thumbnail it's a little bit more than half of inch.
Like I told you that yesterday I said that I like to leave my base. The other day I told you that
I will leave my base around three eighths of an inch. Actually half of inch is more than three
eighths of an inch so that's the just give you some idea that 195 minus 181 comes to 14 millimeters.
So you have a little bit of
know that how much the thickness is.
And now before I put my bottle on the chuck because I would try to center my chuck.
And then I put it upside down here and I put it in here. Now the important part is you try
to find the level. The level of the bottom and it's hard for you to maybe try to test it. I have
a simple way to do this. If you can find a bubble level and you just place it right in the in the
center. You can see that the bubble is a little bit off and you can adjust and tip over until
you see the little bubble is right in the center. Okay so now I level. Okay
and see if it gets the right. If not I can adjust a little bit. See here is a little bit off.
You can center a little bit. As long as this is level on the you can center it just a little bit.
Once the both bottom and the top is centered. Now you can stop the wheel and
get a clay coil to try to hold the part without slipping away.
And I like to keep my chuck at the leather hard stage. Usually I know that from other studios that
people like to base fire or even high fire their chuck. But for myself I prefer using a leather
hard chuck. That way if since this still has moisture in here so if you have a clay there
the clay is easier to stick on it. Versus the base square chuck or the high fire chuck that
sometimes after fire the chuck warp. Okay it's not perfect centered and also for the clay
it's very hard to get the clay coil to stick on the chuck.
That's why I like to keep my chuck at the leather hard stage.
And also the one of the advantage of getting a leather hard chuck is if the cylinder the
size of the cylinder is not fitting well you can trim your chuck a little bit. Since the chuck is
still at the leather hard stage you can trim it. Okay so now both the the chuck and the part is
in secure.
Now I'm ready to remove the clay from the base.
And usually when you are trimming you can remove a little bit more clay here since
a lot of the clay has been left out without pulling it up to the very top. So
the base will be a little bit thicker so you can remove more clay from the base the bottom corner.
And for your information I usually like to trim the base here in this portion a little bit less
than three millimeters. So for my measurement that is about 14 millimeters. So to be trimmed
within three millimeters that would be 11 millimeters deep. Okay when I'm digging in
I could go in 11 millimeters.
Okay now I'm ready to remove the middle part of the clay. First I use my tool to
make a mark here so this will be my cut ring. And then the middle part since I know that my clay is
millimeters. How do you know 11 millimeters? Now I can bring back my measuring tool here.
I can put this in and check it. Okay actually now it's still only eight millimeters so I
know that I have three more millimeters to go.
Okay now it's about 10. So I could go one more. Actually if I want to trim within three
millimeters actually I need to go to about 12 millimeters deep. Since there's a thickness of
this stainless ruler here so you need to include the thickness. Okay this is about one millimeter.
Okay so this is about 11. I will just go a little bit more.
Now I know that this is the right thickness I want and I will stop trimming.
So that I know the base, the bottom is about three millimeters. And from here I will judge
the outside part and the inside part. See if this the inside corner and outside corner
is the same level. If not then I can trim a little bit more here. And actually this one
is a little bit higher. So I'm going to remove a little bit more clay from
that's the base that the foot that I trimmed.
And now I can turn it upside down and trim the top.
So this will be what it looks like roughly on the base. Okay now I'm ready to trim
the neck. Turn it upside down and trim the foot first.
Okay now for trimming the neck it's a little bit different using the tool. It's a little bit
different using my regular. This is my number two trimming tool which is a little bit hard to
get to the curve. You see that there's a little curve here. It's hard to reach that since this
is straight straight pitch. So actually I have a couple of my shin tools that has a curve.
The number four, number five, number six. They all have a curve. A smaller curve and larger curve.
You can use the different curve to trim different
place that you try to find the curve that's fitting. Like this one here is fitting
It's also a curve.
So with this tool I can get a curve here and then use the straight edge to trim the bottom
so that it connects nicely and smooth here. Okay so that's the trimming. Now I like to put some
decoration groove to this bottle and this is my number four trimming tool. I will do one by one.
So it's hard to get to the bottom and I will put it back on the chuck and
do it again since I have the whole piece trimmed.
So
the whole piece has been trimmed. I put a little bit of decoration groove here
for the look and using the different curve of my trimming tools. Number four, number
five and number six. So different curve of my trimming tool that can trim this part here on
the neck so that the neck will be thinner. Okay so this one has been trimmed. I like to
cut it open to see how the base and the bottom look like.
At the trimming I cut it to show you what's the wall thickness inside
and then you get my ruler here and I told you that
the bottom for this part here I like to trim it within three millimeters and from my
measurement it's exactly three millimeters here the thickness and also the wall
the thickness of the wall is about three millimeters too.
So that's the using the measurement that you can get it more precisely how much you can cut
for the bottom so you don't leave the bottom too thick and you don't leave the bottom too
thin or even cut through it. Okay so with this smaller opening that using the
measurement tool you can get it very precise the measurement. Okay so thanks for watching.
