Doors are the most annoying and hardest ones areas so work with, but it makes a huge difference, its worth the work you put into it. The next thing that will help improve the quitness on the inside is the weather stripping. Each door has a few lock and handle rods in there, those usually rattle and flop around, when ill get new door panels ill likely wrap the rods inside the doors with some foam tubed or something. to help with them hitting things??
Hey guys, what's going on? Welcome back to the channel and on this episode we're going to be
hitting some more things on the inside. What I'm going to be doing on this episode,
I'm going to be removing the door panels and since I haven't found the new door panels,
it's 2008 to 2016 yet, I'm going to go ahead and basically install the kill mat.
We're going to use this stuff right here. We've got a kill mat for doors,
the metal stuff on the inside behind the panels. Do that one and that one, do the back ones and
then I might even remove that panel right there and do the same thing on the back here and then
put it back on, put the door panels back on. That way I can at least drive the truck and then when
I do find the door panels, then I'm going to go ahead and swap these door panels to the newer
style 2008 door panels because right now it's raining season and I have some seats outside
underneath the cover but still they get a little bit wet when it's raining. So I want to go ahead
and actually just start driving the truck, put everything inside that I can, that way none of
the things are getting wet. Let's see for comparison how the door sounds without any
kill mat installed. Door closed, I mean it's pretty decent, it's not horrible.
Let's have sounds closing with nothing upgraded. The fronts always sound a little bit looser.
Let me try the other side real quick and this one has no door panel but this one actually sounds a
little bit better and these do have some kind of one piece sound deadening installed.
Maybe yeah it helps a tiny bit but I want to see if I can actually put some more here
on the inside and put some on the outside and then I'm probably gonna
cut out a hole right here like a service hole so I can service the locks when I need to
probably later because I think the newer ones they have like a square cut out right here.
I'm gonna see exactly where I'm gonna probably just copy the same thing. Alright so I'm gonna
go ahead and start removing the door panels, remove the carpet, clean things up and start
remove and start installing the kill mat and then we'll see what we get. Alrighty let's go.
Alright guys and the doors are done. Kill mat is installed outside, inside. I put a few as
much as I could on the inside as well because that would make a huge difference and I tucked
them in you know just three sheets on top. I think I did like maybe one sheet on the bottom and I
kind of sliced it in half but that's you know I'm doing this basically like I'm doing this for
myself and I want this truck to be as quiet as possible, as dense as possible so I can keep all
the sound out, all the heat out and you know it's going to be a lot better in the summer and a lot
better in the winter and it's going to be more enjoyable to drive. Now this hole right here
I cut out on the newer doors. The square is actually a little bit smaller. I think I cut a
little bit too big. Not a big deal but it'll be a lot easier to reach the actual door lock
actuators because eventually I'll be fixing those as well because all four of my actuator
door locks are not working so I'll be playing with that as well. Back doors are done as well.
It was a little bit tighter on the back doors to get on the inside of the door obviously because
it's a smaller space, tighter holes, smaller holes but I did the best I can to get as many
Kilmat panels in there as I could and it made a huge difference. On the back as well where the
lock is I cut out a hole as well. I believe on the newer doors there's no hole here but I went
ahead and cut one out just for the future. It'll be a lot easier to get to the back door locks over
here as well. Now here's the driver door. It's not done. No Kilmat installed yet. Here's what it
sounds like. Sounds like a tin can. Closes kind of. Here's the back door. Also not done yet.
And here are the finish doors with Kilmat installed. Ready to go. Closes so much better.
So much quieter. Feels more like a solid truck. More like a newer truck kind of feel to it.
It's just so much more enjoyable. I'm still gonna work on the weatherstripping a little bit later
to see if I can improve that. Something is flopping inside here when you close the door.
It can be improved a little bit but it is what it is. The door is 10 times better as it is
and I'll be improving later. Once I find the new door panels I'll be replacing them as well and
I'll fine-tune the doors. All right and the door is all finished. Nice. And when I'll be doing
the new door panels I'm going to be changing the weatherstripping right here and I might even
change the weatherstripping around the doors as well. I mean the door jams because this is pretty
floppy and old. So I might get this replaced and it's going to be even tighter and might close a
lot better. So we'll see if it's going to make a difference. Here's a quick little view of the
inside with a dash, back seats. It's getting there. It's getting there. It's taking some time but it's
getting there. So yeah it's going to be it's going to be hopefully it's going to be a nice
quiet truck on the inside. I'm doing my best here to make it as quiet as possible. And yeah the
gray and tan doesn't really go that well but yeah once I find the door panels, gray door panels,
maybe black door panels, then I'll start doing all the plastics and everything else, headliner,
all the good stuff and finish that up. So now my next step after this video is to get the dash out,
finalize the wiring on the inside, put it back in permanently
and then start putting in the seats and everything else and then I can start driving it.
All right guys here we go and the doors are done. Sound deadening is done on the inside of the skin,
outside of the skin. So we got about we got what two layers of sound deadening on the doors
from Kilmat. We got the firewall done before we installed the dash. I did the firewall with
Kilmat. Then I put foam over that and then I put a third layer of factory sound deadener over that.
So that's triple layered protected and I got foam on the floor underneath the carpet and we got new
carpet installed in the whole truck. And so now the only thing left to do is the headliner and
do Kilmat sound deadening on the roof. And I'm probably going to do foam over the of the roof
panels and then I'm going to see if I can. I have a headliner from 2011 headliner. I'm going to see
if I can clean that up, see if I can get that installed. If not then I'll probably have to
find a newer headliner. So guys that'd be it for this episode. If you want to see more F-350 content
go to the playlist and I got all that stuff in the playlist there. Whatever you want, all the
little mods that I did, everything that I that I did in the past on this truck that's going to be
all there. Or you can just type Fix It Nick F-350 and then type in whatever mod you're thinking of
and I got possibly I've done it and it's going to be on my channel. So guys thanks for watching.
If you're new to the channel please subscribe and we'll see you on the next one.