SpaceX is about to test the largest rocket booster ever created!

Tech Level
93 followers
5 Video Views·Dec 9, 2022
This video is sponsored by Squarespace, the all-in-one platform to build your
beautiful online presence and run your business. Hey hey Marcus, House with you here. Today we
are diving into a number of interesting topics around Starbase. For the very first time a Raptor
vacuum engine has arrived on site. Booster 3 was not only stacked but also transported to the test
stand. The launch tower has again risen and loads of activity around the Sanchez gas site.
SpaceX's Transporter 2 mission was beautiful sending 88 satellites into orbit even after
a frustrating delay. The Starlink internet satellite constellation has passed a critical
milestone for active users. The International Space Station had another pair of rollout solar
panels installed in another spectacular spacewalk. And Virgin Orbit successfully
launched its first commercial mission. What a week! So we do have quite a lot to cover today
at SpaceX's Starbase facility in Boca Chica Texas especially around the launch infrastructure and
overall vehicle construction. I feel like there has been a general sadness since it was announced
by Elon last week that the Super Heavy booster in progress was no longer going to be the one
to launch. I had countless comments a little dismayed about that tweet. Never fear though,
remember that SpaceX moves at a phenomenal pace so we'll see the next booster stacked up before
you know it. And you know this is why we follow so closely with you right? What other agency can
you study like this and have entire vehicles made over the course of a few weeks? It really is crazy
stuff. So at the orbital launch site the sixth section of the orbital launch tower was finally
lifted after spending quite a lengthy amount of time beside it the week before. We believe that
delay was simply due to weather. You just don't want to have a massive steel section swinging
around wildly on a crane here and you can see the amount of precision that's needed to get this
perfectly lined up. So yes there we see it being placed carefully on top leaving just the two
remaining sections. The seventh section was rolled from the Sanchez site on Monday with it arriving
at the launch site soon after and then on Thursday up that went as well. And here is the eighth
section. It'll not be long now until we see this colossal tower fully stacked. So here the orbital
launch mount itself has recently received six pieces between each pillar to evenly distribute
the load and fix the whole structure in place. These connection beams do however have some
interesting characteristics to them. If you look closely you can notice that they are hollow. Only
the bottom and the two side walls exist with no top wall to cover it. This could be because wiring
and general cable work or even plumbing need to go through. Another more likely idea could be that
they are just going to be filling these with concrete that'll further stabilize the entire
launch mount structure. It is currently unclear what the final configuration of the launch mount
will be but it is possible that additional supports will go in before the launch table is integrated
with the rest of the mount. That orbital launch table which is still being worked on at the build
site should soon be placed on top. Now straying away from the mount itself you can also notice
two rebar pilings on the ground on opposite sides of the launch tower. We aren't sure what exactly
these are for or if they are scrap pieces but it wouldn't be surprising if this is where the ground
support equipment cabling and pipes interface with the launch mount. Traditionally at other launch
facilities the launch tower or the launch mount handles fueling and communication to the rocket.
Could it be possible that a similar sub building or reinforced bunker handles those needs here?
Let us know what you think in the comments. Also around the launch mount we are generally
seeing the area clear out. This might be to prepare for the giant LR11350 crawler crane
to move over and get close to the launch table or maybe it could be just for general access.
We aren't entirely sure. Moving just over to the side of the launch tower over the past two weeks
the SpaceX team has begun building these two new foundations which were spotted by RGV Aerial
Photography during his recent flyover. As always the community contributions for Mauricio's work is
critical so thanks everyone there for the amazing support that they provide. With even more funding
he can take even more frequent flights. Now check this out here. These look to be the staging area
for Starship where they will stack them on top of the booster before being lifted onto the mount
for an orbital launch. Those foundations in the shape of a circle are likely nine meters in
diameter and will support the weight of the two stages as we see the traditional six-point hexagon
layout for the Starship to sit on. This is similar to the display stands where Starship 15 and 16
both currently sit. But what's unique is actually the presumed super heavy stand. The super heavy
stand has a total of 12 mount points double that of the Starship. That is for obvious reasons as
the booster is in itself heavier and larger than the normal ship and it requires a greater number
of hold down and mounting points for stability. These two stands are a complete surprise as none
of the draft assessments seen show such a mounting area to exist. A little jump over to the suborbital
launch area we can see the stand adapter right here. This was the same stand adapter that was
used by the booster test tank known as BN2.1 while it was undergoing its testing campaign.
Since then it has been mounted on top of suborbital launch stand A in preparation to receive booster
three for its own testing campaign. Over at the Sanchez site the third cryo shell has now been
completed with the fourth now undergoing stacking operations. To keep on top of this we of course
have the amazing Brendan Lewis who has now added the status of these cryo shells to his starbase
production diagrams as well. Follow Brendan there to keep up to date with all of these construction
diagrams they are amazing. So close by SpaceX look to have activated five of their newest natural gas
generators. Well they're not exactly new but new to SpaceX. These generators actually come from
another company and we currently suspect they were bought in to power the air liquefaction system.
It has been undergoing assembly and construction for several months now and in total these five
generators can produce up to 14.6 megawatts of power. Regarding the air liquefaction plant we're
not exactly sure how much power is required to be fed into this but it sure is a lot considering the
level of condensing heating then recondensing that is necessary to split the ambient air
into the three main components nitrogen oxygen and argon. Together those three have drastically
different liquefying temperatures which make them easy to chill extract and then rechill at each of
their respective liquefying points. Hopefully with the generators kicking into gear this means that
we'll soon see the air separation units begin making some locally brewed liquid oxygen. Now
over the last week booster 3's forward dome was stacked onto the first methane triple ring section
in the high bay. This was then stacked on another triple ring section and then onto a full ring
section. That completes the methane tank with a total of 13 rings. The booster construction and
transport stand was taken into the high bay all in preparation for the final stacking of the tanks.
Then at 9am on Tuesday the liquid oxygen tank section was lifted and mounted onto the super
heavy transport stand. Final stacking then started at 3pm with the methane section being lifted and
set onto the rest of the booster. At the base of the booster here there is some sort of jig which
people originally thought could be a structure for a leg or even a flap. However after a closer look
it can be seen that there is actually a COPV inside the structure. This needs to be placed
on the exterior of the booster because unlike Starship there is no skirt or nose to place the
COPV's internally. As future boosters will be reaching a very high velocity this will need some
sort of protection to survive the forces in flight. Of course on Thursday this beautiful shot of the
booster rolling out of the construction area to head down to the test stand just blew us all the
way. Just another day at SpaceX right there. From this perspective you really do get to see the
staggering scale of the booster. In what seemed like no time at all the booster was placed onto
the test stand. Although this beefier and upgraded test stand initially seems indicative of a full
super heavy static fire that sadly won't be the case. With the existing suborbital stand still
intact underneath the adapter piece this means that the outer ring of engines on the booster
will not be capable of firing at all. For that the booster would require being placed on the orbital
launch mount. On top of all of this the biggest news of the week at Starbase was I think this
special delivery. Just look at this the first ever Raptor vacuum engine to be delivered to the site.
We'll talk about that more in just a moment but before that a very big thank you to Squarespace
today for sponsoring this video. Are you wanting to get a web presence set up super quickly with
minimal fuss for a cost that doesn't break the budget? Squarespace is the solution for you. This
great system provides an incredible all-in-one platform to build your website allowing you to
display beautiful content, promote yourself, your business, online store, or maybe even a charity.
The best thing you don't even need to have any experience in web development. If you can upload
beautiful photos and write your own great content you will immediately feel right at home completing
a website with Squarespace. Simply get started with the loads of templates to choose from, select one
that matches your brand, and that is it. You can also improve the search result ranking of your
pages. Simply optimize the post titles and descriptions with the inbuilt SEO tools and you
can give your site the best chance for visibility. Some of that content you may want to provide for
exclusive paid members as well. That allows you to generate revenue through those supporting your
work. If you want to check it out for yourself just head to squarespace.com slash marcus house
and save 10% off your first purchase of a website or domain. You'll find that link in the description
below. So yes here we have the first Raptor vacuum engine delivered to the site. Just imagine
how crazy it will be to see three of these engines used to power ship 20 for its orbital insertion
burn during Starship's first orbital flight. Elon did verify on twitter that this engine is indeed
for ship 20 so that isn't just an assumption that is confirmed. He also added that this version of
Raptor vacuum engine has 378 seconds of specific impulse targeting over 380 in the future. Also
here captured by the incredible Mary aka BocaChicaGal with NASA Spaceflight after her well-deserved break
we saw this delivery of three sea level Raptor engines. These are of course presumed to be used
on Starship 20 as well. Now in last week's episode we saw these hot gas thrusters spotted on booster
three's forward dome section. Elon stated on twitter that they are an unnecessary complication
for now and that they will be removed from this prototype. They will instead be used on a future
version. With an isp of 300 compared to the cold gas thrusters that are used on Falcon's booster
which have an isp of 60 these new hot gas thrusters are five times more efficient. Presumably also much
more powerful. These thrusters are needed to maneuver the much larger nine meter wide super
booster. If SpaceX really wants to catch the returning booster they will need to make a load
of improvements even over the Falcon 9. Although that is very successful with its landings it is
still often quite a few meters off a bullseye landing. That vehicle of course does have the
disadvantage of not being able to hover as the super heavy will be able to. With better thrust
control these powerful thrusters and the large grid fins that are planned SpaceX should have
the technology to very precisely return to the launch pad and catch it right out of the sky. From
there the engines are switched off so it can be lowered gently back onto the launch mount. Now
last week we did show the statement from Gwen Shotwell suggesting the orbital flight test could
be in July. At MWC 2021 Elon stated that SpaceX are going to do their best to do an orbital Starship
launch attempt in the next few months. He also added that they'll certainly have an orbital
capable booster and ship along with the orbital launch site all ready within the next month or so.
On Twitter he did expand on this though saying that this is the internal goal if things go right
which needs to be aggressive. Obviously some things will not go right internally and there
will be external issues too. That said I think that we can stack an orbital ship on an orbital
booster in July. So yeah that is a pretty big claim right there. What do you think about that?
Now we had some other awesome news as well. The second dedicated smallsat rideshare launch for
SpaceX, Transporter 2, was a terrific mission to watch this week. It lifted off from Slick 40 at
Cape Canaveral Space Force Station on Wednesday June the 30th and while not carrying a record
breaking payload of 133 individual spacecraft this time like it did with the Transporter 1
mission in January this year it's still super impressive. This time it carried 88 craft and
believe it or not this actually had a higher overall payload mass than the previous ride
share mission. The booster that pushed the second stage out of the atmosphere was flying here for
the eighth time with missions such as GPS 3, Turksat 5a and five Starlink missions already
flown. You could certainly tell too by that very toasted appearance that we saw there on touchdown
at landing zone one. There we go right there just terrific footage watching the eighth landing
overall. This launch had a few interesting characteristics as well because it was a
southern launch trajectory set to deliver the payloads into a sun synchronous orbit and also
the second stage needed to slightly deviate the course to keep it off the coast then targeting
that final inclination of 97.6 degrees. It is worth noting I think that this mission was delayed
after a scrub the previous day with Elon Musk tweeting afterwards that this was due to an
aircraft entering the keepout zone adding that this is unreasonably gigantic. He also added that
there is simply no way that humanity can become a spacefaring civilization without major regulatory
reform feeling obviously frustrated there. Now I'm not going to talk in any detail about the
individual payloads for this mission but there is a great article here from spaceflight.com
that covers that in depth. A link to that is in the description if you want to read up on all of
So the second stage did a quick burn to place it into its stable orbit at 54 minutes into the
mission followed by a long series of deployments. The last of course there was SpaceX taking the
prime opportunity to release three new Starlink satellites. Speaking of Starlink there are a few
quick announcements in that regard that are quite significant. With all of the 72 orbital planes to
be active sometime in August along with better coverage and other improvements this is hopefully
going to become a significant source of revenue in a very rapid time frame. Of course because the
service hasn't yet been completed reviews have been a little mixed but once it's all rolled out
that should make a big difference. SpaceX is estimating at least 100 megabits per second
download speeds with 20 megabits per second upload speeds. Quite impressive for anyone
that is underserved in remote locations. Elon was of course stoked that the number of active
users of the system has already passed 69,420. I don't think I need to explain that any further
other than to say that with a $99 per month fee it's already close to 7 million per month in
service costs alone. That excludes of course the setup fees and any margins on the equipment being
delivered to consumers as well. Regardless that is just the tip of the iceberg with Elon hoping
to grow that user base to half a million over the next 12 months. Even more interesting was
the information shared talking about how Starlink services are being looked at for aircraft
specifically focusing in on the 737 and A320s given that they have the ability to serve the
most people. Because each aircraft type requires regulatory approval this makes the most sense.
In a month or two we should also see the polar launches of Starlink begin. These orbital planes
will begin servicing those areas currently not covered by the existing shell. All very exciting
Some more exciting updates at the International Space Station again this week as well.
For the third time in nine days Shane Kimbrough and Thomas Pesquet ventured out the airlock.
With the benefit of the extra troubleshooting skills the mission this time was pretty slick
installing the second pair of the new International Space Station rollout solar arrays. The first of
those two arrays was successfully commissioned into service over the two separate spacewalks
on the 16th and 20th of June. I've particularly enjoyed the incredible footage from all of these
spacewalks. This view right here made the palms a little sweaty. Don't look down or is that up?
So working from the Canadarm2 the array was moved over to the Port 6 truss. From here both
astronauts bolted the new solar array to the canister located at the bottom of the P6-4B
array. With the station now in darkness and producing no power the connective cables were
rearranged to allow for integration into the 4B power channel. Then back in daytime the final
steps saw the restraining bolts removed with the solar array beginning to unfurl into its 63 foot or
19 meter length. That was a process taking approximately 10 minutes. You just got to take
your hat off to the way this pair has worked as a cohesive team. They have achieved some great
outcomes here and that will benefit the station and its occupants well into the foreseeable future.
A pretty cool launch from Virgin Orbit this week as well. Following the team's successful orbital
launch demonstration in January, Tubular Bells Part 1, which launched on Wednesday,
marks the next big step for Virgin Orbit. This was their very first commercial flight and for
this mission LauncherOne carried payloads for three customers from three different countries.
The US Department of Defense's Space Test Program, a Polish satellite from Sat Revolution,
and the Royal Netherlands Air Force. Ground preparations went smoothly with the crew soon
having Cosmic Girl, the 747 carrier aircraft, and LauncherOne ready to roll. Departing from
California's Mojave Air and Spaceport, it was wheels up and straight out to the launch zone.
In no time at all the command to release was given and LauncherOne was on its way. Almost
two hours later, there was the confirmation of successful deployment of the seven small
satellites into their designated orbits. The small satellite launch market now has yet another option
with no shortage of customers looking for innovative and cost-effective ways to send
their payloads into orbit. So yes, there is another action-packed week of updates to share there.
Remember as well that we are huge supporters of the transition to electric vehicles here on the
and our partner EV offers the ability to hire an electric vehicle in Australia. Perhaps you have
wanted to take an extended test drive. You could be touring the country and want to drive around
in a Tesla. If that sounds appealing to you, you can use the link in the description for a discount.
Thank you most of all to you right there, the incredible supporters. You could be a regular
viewer of our content, perhaps a patron or a YouTube member supporting what we do. Or you
could be picking up some sweet gear from our merch store including this shirt that you see
right here. This design is also available in a wide range of products and clothing styles. No
matter how that you support know that it does make a huge difference to what we do and it allows us
to increase the time that we can collectively spend in research, editing and quality control.
If you like what we're doing and you'd like to help assist us with what we do directly,
you can join as a YouTube member via the join button below or you can become a patron at
patreon.com slash marcus house. Either of those options gives you access to chat to us more
directly via the linked roles on our discord server. You can also have your names listed
right here like these other amazing people and you also get earlier and ad-free access to the
videos to watch before anyone else. A massive thank you as well to the production crew and
the quality control squad here for helping me research and proof all of the material in these
videos. If you love this content remember to subscribe, to like, to share and remember to
follow as well on twitter at marcus house. In the tile in the bottom left today we have my midweek
video talking about the HLS. Check that out if you missed it. It wasn't my normal upload time.
In the top right my latest video and in the bottom right content that YouTube has selected
from the channel just for you. Thank you everyone for watching and we'll see you all in the next
video.
