SpaceX Starship Fully Stacked for the first time, Starliner and Starlink Updates

Tech Level
93 followers
11 Video Views·Dec 9, 2022
This video is sponsored by Squarespace, the all-in-one platform to build your beautiful
online presence and run your business. Hey hey Marcus, House with you here. Well,
last week we talked a lot about the crazy ramp up of speed at Starbase. This week though,
this was beyond nuts each and every day. Starlink flights are returning once again,
but why the delay? Along with that we have updates on the delayed Starliner mission
and also on the unintentional rotation of the International Space Station,
which was actually much more extreme than first reported.
So once again, what an unbelievable week that it has been at the build site at SpaceX's Starbase
facility in Boca Chica. Each week we get mountains of comments from people that haven't really ever
followed this before, just amazed at what they are seeing. The Starship and Super Heavy booster
collectively is the largest rocket to ever be created, and it will hopefully complete its test
flight to orbit successfully soon. The mainstream media really doesn't cover this amazing story
unless of course there is some sort of explosion. We here cover this every Saturday in detail,
and this week has been quite the incredible one with SpaceX continuing that massive ramp up of
activity, arguably even faster than what we were seeing last week. The biggest news I think is of
booster 4. The first grid fin was lifted and attached last week just as we were preparing
our video to go live. Within a day, all three others had joined the show. Under the cover of
darkness they were mysteriously painted black with no photographers catching this happen.
Eric X tweeted a render of the new grid fin design saying that it looks like
non-folding grid fins on BN4, guessing that this is a case of best part is no part.
Elon replied saying yes. Now this is interesting as we of course know that Falcon 9's grid fins
do indeed fold. That feature is being eliminated on Super Heavy as this is just another mechanism
which adds unnecessary complexity, mass and failure modes. Musk also added that grid fin
designs work but they don't necessarily maximize the payload. Something with much more drag to
reduce terminal velocity and reduce landing propellant might have better performance.
So yes, it looks like the grid fin control in general could be up for further changes.
Anything that helps to use less propellant for the landing burn should mean an increase
in payload capability. So at 10am on Sunday morning, Booster 4's liquid oxygen tank was
lifted and mounted onto the booster transport stand in preparation for stacking. Then at just
after 3pm, the bridge crane was attached to the methane section and up that went onto the rest of
the vehicle at 4.30pm, making this the third booster to be fully stacked. More importantly,
of course, this is the first orbit capable booster to be created with the other previous two
being just pathfinders. Almost a week ago, Elon shared a stunning photograph of the enormous
Super Heavy booster prototype saying that SpaceX are installing the Starship booster engines for
the first orbital flight. You can see just how massive the booster is with humans for scale in
On the Sunday evening, a massive amount of progress was made with Booster 4's engines
as all 29 of them were mounted in a single night. This included 9 Raptor center engines making up
the full central cluster. These are set up with one in the middle plus the 8 circling the center.
Together, these provide the control authority for the booster in flight via thrust vector control,
or gimbling as it's quite so often known. That is very important throughout the flight as without
them, the booster would have very little roll control, meaning less overall authority of the
entire full stack. Now, I mentioned 29 engines earlier, so that means there are still another
20 to address. Those are the Raptor Boost variant. These engines are fixed in place,
meaning no gimbling at all, but they produce the majority of the thrust on the ascent.
The 20 of those engines were the bulk of what was seen that late night. It sure did provide
quite the show for Nick here who captured nearly every engine that went into Booster 4. Be sure
to give him a follow there on Twitter as he's capturing many photos out there now on a daily
basis. Thanks Nick. So continuing on, the 20R boosters, as they are commonly called,
were installed in a timely manner along with the 9 other gimbling Raptors. On average,
it looks to be taking only 30 minutes to mount each engine. That is astonishing considering 29
engines isn't even the final goal for SpaceX as it currently stands. We expect that Booster 5 and 6
will still have the 29 engines, but Booster 7 will probably include the 33 engine thrust structure.
This would be amazing as 4 additional engines on top of this would be providing even more thrust,
and more importantly, it gets the booster closer to the 7600 ton thrust mark which Elon Musk
targets as the ultimate goal. Faster engines installed means faster testing, and SpaceX
doesn't seem to be slowing down at all in the near future. If you want to know a little more
information about each and every Raptor installed on Booster 4, check out Arceus's diagram here on
Twitter. He was up all night there with Nick to log and record the exact engines mounted.
On Tuesday, an intermittent road closure opened at 9.30am, ending much later in the day at 3pm.
In that window, Booster 4 was rolled out of the high bay at 11am and made its way out of the
facility and onto Highway 4 30 minutes later. Elon shared these two photos along with this
stunning video as it rolled out of the site, just showing the sheer size of this beast.
As Booster 4 entered the launch site, we were provided with the amazing views of the two
boosters in the exact same shot. A first there for the Starship program. The obvious difference
between Booster 3 and 4 is the gigantic grid fins coated in black there, but also added
stiffeners on the interstage so that it's strong enough to hold Ship 20 on top. So now we move
over to the mid bay where Ship 20's tank section was rolled outside on Monday ahead of the
aft flaps. The first flap was installed that afternoon and just a few hours later, the second
was lifted into the air and attached as well. As we mentioned last week, these aft flaps are around
20% narrower and lighter than previous versions. Almost a week ago now, the first Raptor vacuum
engine for Ship 20 was delivered to the build site and removed from the truck that night.
The next day, another two appeared, however only one was removed leaving this white one.
So with those two that were delivered and removed off the trucks along with the one that was
delivered several weeks ago, there were three Raptor vacuum engines on site for Ship 20.
All of those were then of course installed on August the 4th and interestingly, this is the
first time we've ever seen this wide rim plate here. Now is this for the support of the vacuum
engines? Is it just for general stiffness or maybe to even assist avoiding plasma spill during the
re-entry? Perhaps it is all of the above. I'm not so sure. Let me know what you think in the comments
below. Along with the three vacuum Raptors, we of course see the three gimballing sea level
engines there in the center. In that image shared by Elon, you can even see that one of these is
labeled 57. Well, Booster 3 used engines 57, 59, and 62 which leads me to believe that S20 could
be using the exact same three. So with all of that, this is yet another new milestone as we've
never seen more than three Raptor engines on a Starship prototype and we've also never seen
Raptor vacuum engines installed before either. Altogether, Ship 20 could be capable of producing
more than 1,250 metric tons of thrust in a vacuum which I believe makes it the most powerful orbital
rocket stage ever assembled. So with Ship 20 moved into the high bay, it was time for the nose cone
mate. That was being prepared at the low bay and after it was stacked on top of the barrel last
week, it was then time to attach the forward flaps. On Sunday morning, the installation was
underway with it receiving its first forward flap sporting those thermal protection system or TPS
tiles on the windward side. Then on Monday afternoon, the second forward flap was lifted
and soon installed as well. More and more TPS tiles were added throughout the week and then
it was time to roll the nose cone over to the high bay at 9pm on Wednesday night. Just hours later,
the nose cone was hooked up to the bridge crane and the lift was underway. Overnight, that was
stacked on top of the tank section completing the first ever orbital Starship. Now for quite some
time, the community has been wondering what payload will be placed inside of this nose cone
for its orbital flight. Thanks to Eric X here asking if there's any payload for the orbital
attempt, we now have an answer for this. And interestingly, it follows in the footsteps of
SpaceX's very first orbital flight of Dragon in 2010. Starship's first payload will be...
a wheel of cheese. So next, we're going to head all the way over to the launch site to check out
what has been happening there. We'll talk more about that in just a moment. But before that,
a very big thank you to Squarespace today for sponsoring this video. Squarespace, of course,
is a fully managed solution providing everything that you need to get a new website presence up
and running. With all of these simple tools included and with pretty much zero web development
skills, you can start up a free trial and have a site set up in just hours. The template systems
and the content management included is amazing, but it's equally as important to have simple and
quick integration with the many services out there. You can so easily link your social media
accounts to display that content on your site automatically. That just gives you immediate
synergy to what you publish and you aren't needing to re-upload that work. It could be Instagram,
Facebook, Twitter, or Pinterest. More importantly for someone like me, you can embed video content
from YouTube or Vimeo and have them up on your site in just a few moments. Perhaps you create
incredible audio with Spotify or SoundCloud. Those options are all available here as well.
If you want to check it out for yourself, just head to squarespace.com slash Marcus House and
save 10% off your first purchase of a website or domain. You'll find that link in the description
So yes, over to the orbital launch site, we've also seen a mountain of activity.
Last weekend, two large cranes were connected to the orbital launch table via two load spreaders,
and then it was lifted and placed down on the six pillars a little over an hour later. Elon posted
some stunning shots of the dangling table with the caption that Starbase is moving at warp 9.
That is certainly true. He also added that the table weighs 370 tons and that it needs to be
and match the booster fittings. Of course, on Wednesday morning, the crane was then promptly
attached to booster 4, and after waiting for several hours, lifting finally began at around
3pm. Once it was out of the transport stand and into the air, we finally get to see an unobstructed
view on how much the Raptors there stick out. Then outlap rolled on Thursday in this amazing
scene that we see here by Cosmic Perspective and NASA Spaceflight. Incredible coverage as always.
The full stack was looking like it would go ahead, but the wind was looking a little high.
However, on Friday, that was the day when history was made. The stacking of the largest
and most powerful rocket ever built was about to commence. At 7am, it was lifted off the stand
raising into the Texas sky, and in no time at all, there it was, the historic full stack together for
its test fit. We were just glued to the live stream at this point as everyone celebrated
with SpaceX playing fly me to the moon over the loudspeakers. Just imagine seeing this
colossal beast lift off as rendered beautifully here by 3D Daniel. So yes, there it was as shown
by Brendan Lewis here with the rest of the updates at the time. That full stack was short-lived
however, down it came again just moments later before being rolled back to the high bay. Just
incredible shots from everyone at Starbase capturing all of these firsts.
Additionally, we see more Black Pops continuing to be delivered this week for the catching arm
system. When asked on Twitter if there is a render of how the catch of the booster will work,
Elon replied saying that he will post once we have a decent simulation. Saying all that,
if it's an animated simulation that you want, the amazing Eric X here on Twitter has you covered.
He published his own render here of the landing that Elon himself said is very close to real.
He also added that the arms are able to move during the descent to match the exact booster
position. The catch point is off to the side just in case this fails as you don't want to
hit the launch mount directly. The booster is then transferred back to the launch mount for
the next flight with a turnaround of under one hour. That is all astounding stuff.
Part 1 of Tim Dodd the Everyday Astronaut's interview and the tour of Starbase's facility
came out this week as I'm sure most of you are already aware. Just a few quick points
were particularly interesting. Firstly, the grid fins for the Super Heavy booster will be
permanently extended as mentioned before, but they are now electronically driven. That is a
change from the hydraulic systems used on the Falcon 9 booster. SpaceX also has decided to
remove the hot gas thrusters from the booster and instead will use the ullage gas from the
tanks for attitude control by having four vents spaced 90 degrees apart. This seemed strange at
first, but the gas would need to be vented either way. It can now be used to do useful work to the
vehicle instead while also eliminating the mass and complexity of the hot gas thrusters. Furthermore,
the Raptor version 2 is in the early stages of development with some sub-components being built
with testing of a completed version 2 possibly within the next month. They are also aiming to
eliminate a dedicated stage separation system and will instead rely on angular momentum to
separate the stages similar to Starlink deployment. I imagine that the booster would simply pitch up
right at engine cutoff to induce a slow rotation. Separation would then occur and then the two would
drift apart for a few seconds before the stages fire up. Elon also dropped some interesting
numbers on the go here as well. Apparently, the booster is planned to hold 3,600 tons of propellant
and the dry mass is already stunningly light. Only around 160 tons. Each of the grid fins here
are around three tons as well. The residual propellant that's needed after landing is planned
to be around the 20 ton mark. Quite a bit below the usual one to two percent that you would normally
expect on a vehicle. Raptor version 2 is expected to have around 298 bar in the main combustion
chamber which will result in quite a low area ratio. There is loads more information crammed
into that interview so do check out Tim's video when you get a chance. Now in last week's episode,
we covered the docking of the long-awaited Russian Nauka module with the International
Space Station. Not long after docking with the Zvezda service module, it unexpectedly fired its
thrusters for around 15 minutes trying to pull away. It has since then become clear this week
that the gravity of this situation was actually much more significant than initially thought.
The entire space station rotated much further than the 45 degrees widely reported but it did
so very slowly. So slow in fact that the crew on board would have been largely unaware when the
issue first began. In fact it turns out that the station actually rotated around 540 degrees or
one and a half full rotations with it being finally stopped while upside down. Both the thrusters on
the Zvezda module and on the Progress MS-17 spacecraft were both used to arrest the slow spin
then reverse it back of course some 180 degrees. Scott Manley did a simulation with Blender to
demonstrate the rotation observed. A link to that is in the description below. I think the
thing that is most concerning to me about the incident is that it could have been much worse
had the thrust capability of the vehicle been higher or if there was much more fuel on board.
I wouldn't be surprised at all actually to see a number of new policies come into play to ensure
that such a thing can't happen again in future. Luckily NASA did insist that the crew on board
the space station were never in any serious danger but this did cause the initial delay to the launch
of Starliner's orbital flight test too. Sadly before the launch attempt was actually supposed
to go this Tuesday Starliner ran into some problems of its own. Due to the unexpected valve
position indicators on Starliner's propulsion system there was an indefinite delay announced
that also required the entire rocket to be returned back to the vehicle integration facility
for detailed inspection. Based on what we've heard since then Starliner needs to be taken back off
and there could be substantial work to be done so this may push the launch back months. As always
it's best to be certain that everything is fine before risking a launch but yes it would have been
great to see the mission take place this week. Greg Scott of course was excitedly capturing
everything before the scrub. Just keep in mind how much time it takes everyone to be out there
at the pad to bring these shots to the world even when a launch doesn't happen. Thanks for
the dedication there Greg. A few updates on Starlink with launches back as of next week as well. It has
been a long time between dedicated launches with the last one going up over 10 weeks ago now. True
that there were a few deployed as well in the Transporter 2 mission at the start of July but
why the lack of launches all of a sudden? I've had no shortage of questions about this lately with
many people worried that this was due to the recent legal action. The delay actually hasn't
been anything relating to the lawsuit filed by Viasat as far as I'm aware. That lawsuit was
actually rejected anyway by the Federal Appeals Court a few weeks ago. Not that I was overly
surprised by that. When the competition is trying to slow you down that is a very good sign that
industry disruption is coming. So yes the delay is actually because there are no more launches
needed for the first initial shell to support near global coverage. That was completed months ago.
There are actually four more shells to go on top of this eventually if SpaceX are not restricted
in some way. But before that the next step is to actually place a set of satellites into new
orbital planes with the first of these launching from Vandenberg Space Force Base. So why is this
big deal? Well because these will be the very first dedicated batches that will be placed into
polar orbits. This will allow coverage to the remainder of the planet not served by those that
were placed into the typical 53 degree inclination planes. As you can see here this covers the vast
majority of the world but if you live above or below the shell here there is simply no coverage.
That is about to change. And also these new polar satellites should finally have
laser inter-satellite systems unlike those that have come before as suggested by Elon Musk
back in January. The idea here is that the new satellites will have this capability as well
from early 2022 onward. That will mean that SpaceX can pass data between satellites as well as the
ground stations rather than simply bouncing up and down to the nearest ground station.
Once those laser links are in place that makes it more of a true network. In the majority of cases
of course in populated areas a simple transfer of data up and back down is really all that's
anyway but for transmission between much larger distances the laser network can come into play
in the future and that is really where one of the main benefits of Starlink comes in.
Interestingly as well the Starlink app has had a significant upgrade adding a feature that makes
it easier to find clear areas of sky to diagnose connectivity problems. Already the service is
being utilized by over 90,000 users over 12 countries and given that this is still in the
beta phase I think that is quite impressive. Keep an eye out for the next launch this coming week.
So yes that is another action-packed week. Thank you very much for subscribing and watching these
videos here every weekend. As a regular viewer of our content a patron or YouTube member you are
supporting what we do. If you love the design you see on this shirt you can pick that up on a bunch
of our great gear as well. That really helps. No matter how you support know that it contributes
massively to what I do and allows us to increase the time that we can collectively spend in
research editing and quality control. If you love what we do and you'd like to help assist us you
can become a patron at patreon.com slash marcushouse or you can join up as a YouTube
member via the join button below. Either gives you access to chat with us more directly via the
assigned discord roles. You can also have your name listed right here like these other wonderful
supporters and you can also get earlier and add free access to these videos to watch before anyone
else. A massive thank you especially to the production crew and the quality control squad
here helping me research and proof the material in these videos. If you're interested in these
topics and you'd also like to keep up to date remember to follow here on Twitter at Marcus
House. In the tile in the bottom left today we have my video last week. In the top right is my
latest video and in the bottom right content that YouTube has selected from the channel just for you.
Thank you everyone for watching and we'll see you all in the next video.
