We’re a big fan of Hooke n’ Crooke tools from Holdredge Enterprises, and now, these tools are even better!
We’ve enjoyed having a couple of models from the Hooke n’ Crooke tool line from Holdredge Enterprises. We’ve had both the Heron Weeder (6” (15 cm) blade) and the Honey Bee Weeder (4” (10 cm) blade), both with ash handles, for many seasons - and they’ve worked hard around here at the Dirt Farm!
Designed to rapidly weed maintained soil and garden areas, we’ve recently gotten the newest models of both the Heron and Honey Bee, as well as the new hand cultivator - the Hummingbird!
These tools are well-designed and are things of beauty. But, don’t let their good looks deceive you. These are hard-working implements designed to make cultivation as easy and enjoyable as it can be!
The weeders are different than usual “hulu” (stirrup) hoes, or the common “chopping” type of implement commonly seen at the hardware or feed store. Made of heavy gauge surgical steel, they are sharpened wherever the tool comes in contact with the soil. The are open on one end, with a sharpened tip and adjacent edges that make quick work of either slicing under the surface of the soil, or reaching around behind a weed and “popping” it out.
Whether you are doing largers area cultivation using the long-handled tools, or close up precision weeding with the handheld Honey Bee, they work using the same principles. The Honey Bee is angled into the handle to keep the wrist comfortable and to allow you to easily rotate the head around to where you need it.
And, they are better than ever, due to better steel than the original models (and those were great tools as well!), as well as a one-piece head and tang before being securely affixed to the handle.
The earlier models were made of 410 HC (high-carbon) surgical steel (which is a type of stainless steel) and possessed about a Rockwell 43 hardness. The new models are made from 420 HC surgical steel, with a Rockwell hardness around 51-53. Plainly said, the newer models are harder, resist abrasion and keep sharp longer than the first models. This hardness is the right level that makes the steel tough without being brittle.
Handles for these well-made tools are available in ash (shaped to better fit the hands), as well as yellow straight fiberglass handles. The fiberglass handle is lighter, and is bright yellow, so easier to see and find in the landscape! If you are 5’4” (163 cm) and taller, order the standard 60” (152 cm) handle. If 5’3” (160 cm) and under, you can request a 54” handle.
The Hooke n’ Crooke models offered at the time of filming: Heron Weeder, 6” blade, 60” handle, Wood $58, Fiberglas, $59 Honey Bee, 4” blade, 60” handle, Wood $56, Fiberglas, $57 Hummingbird, hand weeder, 6” blade, cherry handle, $62
We recommend ganging orders to spread shipping cost over more tools. 3 is a good fit in the box, possible to ship 4 at a time. If you are part of a gardening group, or have friends or family members that would enjoy these fantastic tools, group buying is the way to go!
If you’re the type of person that likes to JUST DO IT YOURSELF, having great tools makes that even all the more enjoyable. We haven’t been disappointed with these tools, and we don’t think you will be either!
CHECK OUT OUR DIRTFARMER JAY SHIRTS, CUPS AND HATS AT WWW.DIRTFARMERJAY.COM/STORE!
Follow us on Social Media to know when we’re building projects or releasing new episodes!
Dirt Farmer Jay here from DirtFarmerJay.com. In a previous episode, we told you how much we
love the Heron Hoe. Good news! It's even gotten better. Stay tuned and I'll tell you all about it.
Hey, Dirt Farmer Jay here from DirtFarmerJay.com. Holdridge Enterprises has some great tools in
their Hook and Crook product line. Well, we already told you about, in our previous video,
about their Heron Hoe, which is a beautiful 6-inch wide, open-sided hoe that can work
so hard for you. And we love it. We use it a lot around here. The Honey Bee is the next item in
their product line. It features a 4-inch wide blade here. It's a little bit lighter than the
6-inch, so it tends to be a little bit more nimble. It allows you to more easily get around
smaller plants or things that you want to be a little bit more precise in weeding.
They both feature the notch and the tip right here that allows you to get in around something
and pop it out. And since this is open-sided over here, you get around a weed or slice through it
rather than pushing through it. The next tool in their line is the 6-inch wide Hummingbird. Now,
notice this is a hand weeding tool. It features a really nice handle that allows you to grip it.
My friend Randy at Holdridge Enterprises actually kind of did a nice little upgrade
for me here. This is Brazilian Cherry, beautiful wood that's put on here, and this tool is
delightful to use. And you can be sure this isn't going to be laying out around. This will be kept
in a special place. But this tool just allows you to not have much wrist fatigue because the way
you hold it and enter it into around the work and get around different things you're weeding
or cultivating, the tool really works hard for you. And we'll give you a demonstration of that
in just a moment. Well, before we head outside, though, I said earlier that the Heron Hoe, as
good as it was originally, is even better now. How so? Well, it's in the steel. The original steel
was a 410 high carbon steel. The later one is a 420 high carbon steel. And this has been hardened
to Rockwell hardness 51 to 53. Now, this particular tool has had a lot of love and a service well over
the years, including a handle change. But you can see that there's quite a bit of wear. Look at the
difference between the tips right there. This one used to look like this, and it has worked hard to
wear down that far. And the old version was welded on, as you can see down in here, where the new
version has a single tang that goes directly into the handle. So that's a vast improvement.
And speaking of handles, you can get either ash or fiberglass handles for either the Heron or the
Honeybee. Now, the fiberglass ones are a little bit lighter because they're a tube, but there is no
tapering that is in the handles at all. For those of us that like the ash handles,
they're a little bit heavier, they give the tool a little bit more momentum,
and they're tapered and they feel really good in the hands, but it's up to you.
Another great thing that Holdridge Enterprises has done is made two handle lengths available.
If you're about 5'4 and taller, you'll want to order the 60-inch version. And if you're 5'3 and
under, you'll want to order the handle length that's 54-inch, making the tool a lot more
comfortable for you to use. They've done a great job on these tools.
There's another thing you should know. These are short-run, small-manufactured tools,
and if you're here in the United States, this is a great way to support local industry. Everything
about these tools, made right from the metal all the way up to all the handles, and every part of
it is made here in the United States. We think that's important. You always should try to support
your local economy, no matter where you are in the world.
All right, let's go ahead and take a couple of these outside and put them to work.
All right, let's go ahead and put this honeybee to work out here in the garden. We have a little
bit of a pigweed infestation going, so let's just hit an average place here right down here.
You can see we've got lots of seedlings. We've got juvenile stuff. You start from the right
and work to the left to let that tip do all the work for you. So here we go.
And for bigger weeds, you can get right behind something and pop it right out. There you go.
So you can see you can cover a lot of ground very quickly with this great tool. Now,
let's go ahead and show you the little hummingbird and how well it works in close spaces.
All right, well, let's go ahead and cultivate around this little bed here of eggplant. You
can see there's a lot of little weeds around here. We can just get that right under that like this.
Look at that. Slice it right out. You can go sideways if you need to and direct the tip where
you want it. It's very nice and it allows me to get up close, look in here, without slicing or
damaging the roots of the actual plants. Very handy. Feels like an extension of the hand.
You can use the tip to dig down, get into areas, rotate it around without having to change
and grab other tools. This is a great little tool. Well, as you can see, these tools have a ton of
uses and they really work well. And instead of having all that time showing you all the different
ones, thankfully, Holdridge Enterprises has provided this great little sheet that shows
all the different uses for the different tools and different ways you can manipulate the tool,
hold it, orient it in a relationship to the ground or the plants you're working around.
And just a few minutes spent with this really helps you to get the maximum use out of the tool.
Now, if you're looking for a cheap tool, these aren't it. These are really quality tools with
quality steel that sharpens well, that does hard work for you and makes your life easier in the
garden. You should expect to pay around $60 per tool. And here's an insider tip. If you're going
to buy one, buy more than one. Get some friends in. Here's the reason why. You can get up to four
of these shipped in one shipping tube, which is an economical way to reduce the shipping cost per
tool. And the people around you will be really happy with them. I was talking to Randy and Joanne
at Holdridge Enterprises and they indicated that a gardening club somewhere in the Midwest
ordered a very large group order, up to 60 tools. Their gardeners loved it so much and you will too.
Well, if you found this video to be helpful, won't you like it? And better yet, subscribe to our
channel. When you do, ring the bell so we can notify you of great upcoming content in the home,
the garden, the kitchen, around the home, great homeowner skills and maker skills right here in
the shop. And won't you stop by our website at DirtFarmerJ.com. Check out all of our blogs,
all of the extra content and our new product line, merchandise, hats, shirts, coffee cups,
and so forth. In the meanwhile, if one of these tools can serve you well,
stop over at the website provided in the description below and tell Randy and Joanne
Dirt Farmer Jay sent you. Until the next time, have a great time in the garden.