Complex rappelling options with double ended rope bags

HowNOT2
100 followers
5 Video Views·Dec 6, 2022
THIS IS VIDEO 4 OF 10 - See textbook 👉 https://www.hownot2.com/post/canyon-rope-systems
Here is a free course featuring Brent Roth about different ways to set up rappels through a canyon. This considers ease of rigging, abrasion, ease of rescue and how efficient it is to move people through the canyon.
Episodes 1-5 show the systems,
Episode 6 shows how it can all be done with 1 device,
Episodes 7-8 are friction tests,
Episodes 9-10 are break tests of the hardware and the knot blocks.
All the episodes are in the textbook
Our website https://www.hownot2.com/
👉SWAG at https://www.hownot2.com/swag
👉👉10% supports us at https://www.extremegear.org/
👉👉👉 1000 Patrons makes us viable https://www.patreon.com/howNOTtoHighline
Welcome back to another video in the in the series of...
If you look at the camera we would have just been done.
We're trying to figure this out.
Okay.
It's your introduction.
One of us should have started drinking to catch up with the other one.
All right got the camera girl again.
So this is the fourth video of our canyon core set.
This is a little course on canyon rope systems.
We did an overview of what everything is going to be about and what the terminology is.
We did single rope systems and now we're doing twin rope systems.
The third video was twin rope, isolated,
releasable, and static systems.
Oh, I got it.
You got it.
Somebody's learning.
This is going to be our twin rope compound,
releasable, and static systems.
Nailed it.
This is Brent Roth.
He likes canyons and rafting and owning more gear than any man could use in a lifetime.
That's true.
I don't use half the shit I own.
No, we do it to open carabiners.
They're fun.
Right?
All right.
That's great.
He's got a big beautiful plywood climbing wall that you can send in three seconds or less.
It's certified by the way.
I had it inspected.
All right.
So twin rope obviously is two ropes and compound is, what is compound?
So compound means that the two ropes going down the pitch
are completely independent of one another.
So I can operate two ropes.
Yep.
I can operate one separate from the other,
meaning that it's not like in the isolated systems you go back and look,
it was kind of a dependent thing.
So if somebody was using one rope,
it was limited on what I could do in the other.
Compound is two separate systems.
The isolated stuff seemed to be like the middle of a rope you're tying off somehow.
Yep.
And it might not be exactly the middle, but it's middle-ish.
Yep.
This, you're kind of turning the what?
The rope up, inverted?
So you got both ends?
That is one way.
Or two separate ropes.
That is a great way of looking at it.
And that's where your double-ended rope bags come in real handy or a second rope.
So it was this last time.
Yep.
And now you're talking about doing, we'll pretend this is the end,
doing this and being able to independently do something with either end.
So literally we're doing this.
Gotcha.
Two independent strands.
But you could technically do this with one rope.
Yeah.
This is one rope.
But you would have to flip it up like this to do it, having the loop at the bottom.
Nope.
No.
Nope.
Oh, do tell.
So this is the beauty of double-ended rope bags.
If I have access, every rope has two ends, right?
So if I start my rigging by pulling both ends out either at the same time,
or if a double-ended rope bag on either end, I can pull one out and then I access the other.
And let's say this pitch is 50 feet, right?
I only need 50 feet to run down the wall.
She's got a bag full of rope.
I've got a bag full of rope.
It needs to be at least 100 feet in order to do this.
And if a lot of the pitches we have in canyoning are less than that,
this is something that I could do.
So all I do is I set this up just like we did, and I've got two independent strands.
Or I could introduce another rope.
So I've done this before in a canyon where I set one anchor, one anchor system,
and the first person that goes down and repels,
I'm noticing it's taking a lot longer than what I expected.
And I've got people behind me.
And I'm like, you know what?
There's a faster way to do this.
I'll grab a second rope and just go ahead and build a second system.
That seems very clean and simple.
That's it.
And then pretty much, if you don't want to watch the whole video,
watch these single rope systems and do it twice.
So we're going to test that theory.
So Ryan is going to build our first twin compound static system.
All right.
So to think about what you've learned so far is like, what's a twin compound?
And I'll give you a static system.
Something you can't release, correct?
Something you can't release.
OK.
Do you want to be able to pull one of them down later?
We'll get to that.
We'll get that later.
So I just want you to focus on what we just talked about.
Twin, meaning two ropes down.
Compound, meaning one is separate to the other.
Yeah.
And they're static, meaning I can't release it.
OK.
So just think like a climber for a second and think like, here's your two ropes.
Don't forget to run one through the ring because you got to...
Well, yeah.
I mean, I would just clip it to the ring.
But then you'd have to rebuild it.
I'd have to rebuild it in order to pull my rope down.
So let's start with that.
So just do this again.
OK.
So I would run both.
Well, I wouldn't run both.
No, you want them isolated.
Well, I want two ropes that I can repel down and I still want to be able to retrieve it.
So I only need one of these to retrieve.
So just run one through the ring.
One goes through the ring.
The other, I could just clip off to or do a super eight with bunny ears for redundancy
and clip that off and then create a releasable.
And then here, I would run this through here.
And do I have some fancy...
I guess I could just do...
And in order to make like a knot block, I would grab the last loop and the eye of this eight.
And this gets knot block to that.
And I have two independent things.
Well, first of all, you don't have a whole lot to repel on here, right?
Is this my end I'm repelling with?
Yeah.
Why?
Because the rest is in the bag?
You got it.
Because this is one rope.
This is legitimately one rope.
This is one rope in one bag.
So I need something to repel down.
So you think about this.
If I've got access to both ends, I want to set my rope length.
I can do that.
So I'm going to set my rope length and then just secure it to the anchor.
That's what I thought this strand was.
So could this work?
Now, the way you got here, if I threw the bag down.
Yeah.
And I've got the tails tied up here.
That is, there's a term we call it like a tail up situation here.
But another way to do it, if I want to run this like a compound system,
the idea is that I've got the end of the rope down.
So you can get off of it.
That's right.
Because you don't want any more in the water than you have to.
Or I don't want to put any more rope out of the bag than I have to.
Because you've got to put it back in the bag.
Right.
So why put four times the length?
So the way you had it there, I'd have a lot of rope down.
You would have thrown the middle of the rope down.
Yep.
And had a cluster in the bottom.
So I can run this one down and set that.
And then we're just going to redo this to be the tail in the water.
And if you think about it, we learned just some regular blocking systems.
Is this a good enough blocking system for this sample?
It depends on if you do it right.
That looks good.
So you tie a figure eight.
Figure eight.
The back of the figure eight?
Sure.
And the eye of the figure eight.
Yep.
Is how you do your figure eight blocks.
I would cinch that figure eight up a little bit more snug before putting the carabiner in,
so it retains the shape, which is important.
That way somebody else can identify it.
It's like, oh, he tied a figure eight knot block in there.
The only reason the carabiner is in there is to make it easier to untie
and also secure the end as just kind of a backup.
So you want it just a tight.
It should look like a good quality eight that I can recognize.
Like, oh, yeah, that's an eight.
And then force that in there so it's kind of more stuck.
It's easier to untie.
And then I've got something that definitely can't pass through that.
OK.
Because if I just rely on this a lot of times with a skinnier rope,
then I got to be careful of the skinnier rope pulling through the ring.
So I did not pull out more than I needed.
I have two independent ropes, twin ropes.
Yep.
Double rope is when it's all continuous like a climber does.
Twin.
You can't release this if I were to, like, get stuck on rappel in the water
or I need a rescue.
There's a rub point.
All the stuff we covered in previous.
Right.
It's a static system.
This video is not meant to be watched before the other ones.
Yeah.
So I lose all of those benefits.
The only benefit that I'm gaining with this is I can run people down this pitch faster,
whether they're both on rope actually moving
or I just get somebody in the queue waiting for that person on rappel to get off rope
and then that person's ready to go immediately and I hand that rope.
But these are two independent lines.
Like I said, I have done this before where I rigged up a standard retrievable,
a single static system and then been like,
oh, I'm going to rig another one so I can roll people through faster.
And I did just what you did.
So then you would take your bag.
So check this out.
And you would toss it down.
You'd get on rappel.
Here.
Go ahead and put that eight back in there.
OK.
So now we're going to talk about retrieval.
It's like, well, why wouldn't you always do this?
It's like, well, here's the interesting thing is that I've got all the extra rope
hanging out in my bag.
Do you want the eight normal?
Yep.
Just go ahead and put that up.
I've got two ropes that are going all the way to the ground.
So in theory, I have enough rope out to retrieve the system, right?
All I got to do is figure out how to do it.
I don't need to take out any more.
And this is where this type of system gets kind of interesting.
I'm going to take it.
I'm going to clip my bag because it's going to stay here.
OK.
And this is my this is my retrievable rope.
You see that?
Yeah.
So this rope is already on the ground.
If I just take it, I move this to here.
Now I got a rope long enough to the ground to pull this side down.
If I am not on this and I let go, it's going to go down.
Then it goes down.
So this is where you got to be careful.
You have to have a clean drop.
So not only that is I want to make sure I maintain control of this.
So what I should do is load this up in my device.
Look at that.
It already wants to go that way.
I don't get stuck here at the anchor without a rope and my whatever friction you want.
I'll go ahead and do a hard lock off so that and that's not going anywhere.
Taking that other strand and this is the strand that made it all the way to the ground.
Yeah.
I could pull on this and this is actually a cool little trick.
If the bag doesn't do your job.
I can always pull.
You still have this tail.
Instead of being clipped up here, you have it clipped here and I can pull it down.
You can pull it down, but I want to make sure that I have the other end locked off.
So when I put this weight on there,
this is actually a really cool trick that's in the book that you showed with Andy Kirkpatrick.
Yeah.
About kind of an automatic retrieval system.
Yeah.
Let's say I didn't have enough rope is by leaving a bag, a weighted bag at the top.
So when I get off rope, it literally retrieves itself by falling.
And that's I'll show you what that looks like.
It's like so I rappelled down.
It's a block system.
Yeah.
It holds when I get down to the bottom.
You can see as soon as I get off rope, it's not super heavy, but it's heavy enough.
And this would go all the way to the ground.
So that's the risk that you deal with converting a system like this.
I could pull it up, restuff rope and or take the bag down with me if I didn't want to risk
all of my rope getting caught up in something.
But if it's a clean pull.
But you also have the tail to help pull and guide it off of something.
Yep.
But it better be a clean pull.
Yeah.
I do not want this to get stuck on something.
So there's some little caveats.
Now you got to start thinking.
That's why this is, you know, this far into this video series of like, wait a minute.
Now there's some more technical stuff.
I really need to start thinking about and be curious about.
This isn't something I just want to go willy nilly, sacrifice my entire rope bag.
Yeah.
And then go, crap, I let it go.
And now I can't reach the tail and it's stuck.
And so the way that this course has been categorized, right?
You got single and twin.
And we broke the twin into two categories.
Isolated and compound.
Run me how that's not an isolated system.
Because we're using one rope.
I want to make sure we understand the difference there.
Because I had two ropes.
They seemed very independent.
How would that same system or similar system have been a twin isolated system?
So twin isolated means that remember it was conditional.
It's how it's written in the system.
So when you get into like the static system, it's kind of hard to understand.
So getting into like, what's the difference between a twin compound?
It's as simple as a twin compound system.
If I just built a normal static lock system.
And now that rope is out.
And let's say I have a normal rope bag where I can't get to the other end.
Yeah.
And I want to start moving people.
Simply by introducing another rope.
Yeah.
Setting this rope length and attaching it back to the anchor.
Now I've got another rope that I can propel down.
This is technically a twin.
Yeah.
Two ropes going down the pitch.
Yeah.
Compound.
It's obviously two separate ropes.
Yeah, yeah.
Static.
Neither one of these is releasable.
Why would I do this?
Is because this was already rigged static.
Somebody has got a problem.
Yeah.
And I want to go down and help them.
So this would be like the rescue rope or backup.
Or I simply want to rig another rope.
Yeah.
Because I don't have access to the other end of this.
I'm just going to rig another rope.
This could be a single length for the pitch.
So that's 50 foot pitch.
This could be a 50 foot rope.
Yeah.
It doesn't need to be doubled over because I'm not retrieving it.
This is when I get the line you're retrieving.
Because when I get done.
Now I've got my retrieval line.
Yeah, yeah.
Whether or not I take the bag down with me.
So this is where we get into.
This is more of a concept of understanding and like starting to.
Think about how and what you're rigging.
These terms don't apply to one specific system.
Or knot or configuration.
It's a concept.
I got two ropes going down.
They're independent of each other.
So it's a twin compound.
I can't release either one of these.
And isolated is.
Isolated is the same rope.
Like the same rope.
Always the same rope.
Like.
And it's literally the rope goes up through the ring.
And I'm putting something here.
Gotcha.
Isolating the two strands.
That's why that's that's the difference.
OK.
Whereas here this is its own potato.
Yep.
And then you either take the other end.
You do something different.
You don't just isolate this leg off.
Right.
OK.
So what I what I can do.
It's either a separate rope or the other end of the existing rope.
Right.
And so the key difference of why I would undo this is I want a specific rope length.
I want those tail ends.
I want no more than 20 feet of rope on this.
So when we're getting into whether it's a swimming disconnect.
Maybe it's not in flow, but you're going to rappel off into a pool.
Yeah.
So there's a lot of canyons like that within the southwest and in California.
Would be a lot easier just like.
Plop off the end of the rope and swim away.
Yeah.
So I'm going to set that rope link to the water edge.
It's not in flow.
I don't there's no abrasion.
I don't need a releasable system.
This is pretty fast.
If I've got access to both ends of the rope bag.
Like a double ended rope.
It's like I can set this set this system pretty quickly.
In fact, just as fast as I can.
A single.
And that's because I can pull both ends out of the bag potentially at the same time.
So it's literally the same action.
You did not put this one in the.
Nope.
You're just setting rope length.
Setting rope length.
Only one through.
I set my rope length.
And now all I got to do is isolate these two.
However.
However you want.
Whether it's a block system.
And then I could even.
Take and secure this off to the anchor.
Let's get this out of here.
So even though it's the same rope.
Yeah.
Now I've got those two.
And this is compound.
Because they're very separate.
And now you can rig this setup.
So this would have been releasable.
Yeah.
And that's where you start adding your EMOs, MMOs.
So let's take a look at that.
Make sure you go check out the website.
Brent has written a textbook that corresponds with this course.
What's great about making these standalone YouTube videos is they're more likely to be
found.
So 10,000 or even 30,000 people are going to benefit from this information, which gets
us really excited.
Instead of trying to charge for the course where you're only going to get one or 200
people to maybe pay for it.
So by being able to do this on a shoestring budget, whereas Brent has donated all of his
time, Andrea has spent days filming for us, and I've edited all these videos myself.
We're able to make it super, super cheap.
But it does cost money to make.
And we basically need only 1% of the audience to either donate $1 per episode on Patreon
or buy gear on ExtremeGear.org, which supports us 10% with whatever you buy.
And they do sell Canyon gear as well now.
As a thank you to my Patreons, I give them early access to these videos in this course,
whereas they come out once a week until they are fully released.
We hope you benefit from the content.
What type of blocking system did we use earlier that was releasable?
Do you remember?
Yes, it was a Joker.
Think back to single.
Oh, gosh.
Single releasable.
That was not filmed in the same session.
That was a lot of videos ago.
I was thinking if you went through here and you set this up.
So it's a block system.
What does a block system mean?
So you got to think if I'm using a block eight, I want that eight.
Yeah.
Definitely, you don't want that carabiner here.
So a block eight.
Going back to the single releasable.
I've got my repel strand that went down first.
Repel strand goes down.
Block system, I'm going to want to block on this side.
But that's not releasable.
It is if you.
So this is where the EMO comes into play.
So this is not attached to anything.
It's just it's a block.
It is straight block.
And I'm doing this as my backup.
Okay.
So nobody takes this end and goes for a ride.
Right.
I'm just going to put a bunch of twists in there.
So that stays up kind of nice and clean.
Yeah.
So now nobody can go down.
So this is how a lot of times if I got a double ended rope bag,
how I'll be moving from a single releasable system into a twin system.
Because I built this, set the rope length.
And like I said, I look back and it's like,
hey, you know what?
I want to move people through here a little bit faster.
I've got the other end of the rope.
And you don't even have to do releasable for the other one.
No.
You can choose what to do with your separate, complete, separate different rope.
Right.
So I could rig this one static.
So Ryan, you go down.
Yeah.
And you're like, yeah, the rope length is good.
I'm like, sweet.
While you're down there, check the other rope length.
You're like, the other rope length's good.
Awesome.
Because you don't want to find out you need more rope.
Right.
Or there's too much.
Like I said, this isn't a situation where there's a hydraulic or some feature down there
I'm worried about somebody getting bound up into.
I really want to make this just really simple for people to repel off the end of the rope
and swim away.
Yeah.
So if somebody's down there like, yeah, the other rope length is good.
Go ahead and connect this into the anchor.
Now I have a twin compound system.
So this might make a little bit more sense of how and why it's compound.
Yes.
And then this is releasable.
So you can take the winter mule overhand off.
Because I wanted you to set rope length first.
Release it.
And that's enough friction.
Right.
So a compound system can be kind of hybrid.
But if I wanted this, if I wanted two releasable systems,
because either I had rope abrasion or something else going on.
How do you add this setup if it's already jammed into here?
So if I can get another carabiner in here.
Yeah.
I can rig off that, but that's going to like choke it up quite a bit.
So if I have another quick draw, it makes it a little bit cleaner
because then I can extend this out of the way.
And now I can work from down here.
Okay.
I'm going to throw in a better carabiner for a munter.
Oh, you're just going to put a munter on there.
Yep.
And then mule overhand it off.
Yep.
So now I have a releasable system down here.
So there's a munter.
I can mule this off.
So there's a releasable system.
This is the munter mule overhand, MMO.
This is the...
EMO.
Eight mule overhand.
Nailed it.
Got it.
So two releasable systems independent of each other.
Compound system.
And that way you can move people through quick.
You can...
Man, it's abrasion.
I can set rope length.
I got rescue.
You can rescue from up here.
You can rescue from down there.
Right.
Do you do this a lot?
So how many people do you need to justify doing this?
What's nice with carrying a double-ended rope bag,
like I said, a lot of times I've set up a system
and in the moment been like,
man, I really want to start moving people through quicker.
If I've got access to the other end of the rope, why not use it?
The caveat is when I want to retrieve this system,
again, am I willing to sacrifice
or my rope bag getting caught up in this?
Because this rope is already going down the full length of the pitch.
So this is going to be my retrieval strand.
You could do this and you could clip that.
You could undo that.
This needs to be muled a little bit.
If I just take that draw out and I attach this one to here.
Yeah, that was untied.
Secure that back off.
Okay.
So now we're back to where I've got this strand able to retrieve this,
but the entire middle of my rope is still in this bag.
Which could be a lot if you're only doing 25 foot.
Yeah, if this is 25 feet and this is a 200 foot rope,
60 meter for those people not using freedom units.
I need to leave this up here.
So again, now I'm running the risk.
And now you can see that weight is already on there.
Should I go?
So it wants to go, but it is only a rope bag.
It's not like there's a human.
It's only a rope bag, but I need a way to get down.
So if I do this and clip it on there and they go,
oh, crap.
Hey, somebody toss me that rope.
Yeah, that was my way out of here.
It was.
Those are the moments that I want to look at.
It's like, is this a good idea or not?
So even though I want to get people people through,
is this is the pole nice and clean?
Is it is it worth risking?
How would you do it if you wanted to be safer?
Not risk the rope.
Yeah, take it with you.
I would not if I had enough rope.
Take it with me for sure.
But then you need a W at that point.
Yeah, then I need four times the length of the pitch.
25 feet might not be the end of the world.
You'd have a lot of rope to be dealing with later.
Yeah, and that's a whole lot of rope.
But you know, you didn't want to get into that
and you didn't just find yourself in a situation.
How would you go about this then?
That's where if I maintained a second rope,
why am I hanging onto this rope if I'm not going to use it?
Go ahead and use it again.
I can still make a releasable system
by building an MMO on here.
And then when I'm done with that,
I can take this out of the system.
Clean all when I'm ready to clean all this,
throw this down to Ryan, say, Ryan, clean that up.
Yeah, yeah, you've done that before.
Yep, clean up as much gear as I can.
Now I take this rope bag with me just
and you can see I've cleaned back to a single retrievable,
single releasable, and it's retrievable ready to go.
So I've got no more rope.
I'm taking advantage of time.
If I got other people down below,
they can be cleaning up that rope.
When I get down, I have the least amount of rope as this bag.
Like I said, I'm really looking at efficiency.
And when you pull it down,
you could be feeding it back into your bag.
Undo this, keep feeding it back.
If you're smart, yeah.
If you're smart.
Well, we could do it.
We could do it anyway.
We could do, oh, oh, that's good.
So test time.
I'm gonna break this down, Ryan.
And I want you to build a twin compound releasable system.
Dealer's choice.
Compound releasable system.
Anything you've learned so far is fair game to use.
Twin.
Twin compound releasable.
So they're both releasable.
Here's your two ends of rope.
So I would like to make sure one goes through here.
So I have a solution later.
Right.
Okay.
So we're gonna repel.
Well, there's a, there's a cluster.
So I can confidently say
that I'm not sure where the ends of these ropes are.
So I wanna build a releasable system.
Correct.
And there's a little abrasion.
Yep.
And we got some noobs with us that might drown in the waterfall.
Yep.
All right.
All those things.
Catching on to why I might want this.
Yeah.
Let's see if I can do it.
Hey, what?
They're getting cold.
Oh, they're gonna start moving.
I have no harness with gear.
Can I have a...
What do you want?
An eight.
Eight.
Let's see if I can do the ATEMO.
ATEMO.
Now we're renaming stuff.
That's awesome.
No, it's the EMO.
It's the ATEMO.
This is what makes it releasable.
This, this going over.
This is releasable.
Now I wanna lock it off.
Right.
So this is where I have to go through here.
That adds a little bit more friction, which I have found.
You like that.
I like that.
Otherwise, could I mule?
Yep.
And then so when I pull this out.
With enough force, I've seen where that will want to kind of
start rotating around as the rope wants to slip.
So this is why you add a little bit more.
Yep.
And then you go through here.
Yep.
Doing your, your thing.
Good mule.
Yep.
A little bit of mule, aka a slipknot.
And then your.
Wow.
I really overdo the, the overhand.
It's all right.
And it's a muncher mule overhand.
So I should probably have a carameter in here.
So check this out.
Because you used this giant loop.
Let's go ahead and take advantage of it.
We'll secure that in.
And secure it back up.
So this can't come off.
Without me wanting it off.
Right.
Okay.
And this is.
We're ready for.
Repellable.
Rappelable.
So I have this rope.
That is also touching the ground.
Yep.
And I don't want to cluster this up.
Can I have a draw, please?
MMO.
So can I go into there?
Or does that cluster up going directly into the ring?
So I have.
Do I?
Because this carameter can go through the chain.
You're saying this might get stuck.
Right.
You really got to kind of watch.
Because I can give you another carabiner.
Because.
That will not go through the chain.
Because I plan on loading this.
And put it underneath this carabiner.
That is not going to get loaded.
That's right.
There's usually enough room in the ring.
Okay.
If you clip the ring with the rope.
They'll move.
There's room to share in there.
I think there's more room in the ring.
Than what there is to hang in.
Does this start to get messy for people?
Who show up to start clipping things.
Like where do I put my personal maker?
Oh absolutely.
Absolutely.
And that's where we start using.
I like using this guy.
And you can add this in somewhere.
Into the ring.
Whether the ring.
Or even the chain.
Go into the ring.
Let me see what that looks like.
So now I can start building systems off of here.
And then I still have a hole.
For people to clip in the harness.
Okay.
So it's got a rigging plate.
Munter.
On a bigger HMS carabiner.
Than the D shape carabiners.
So this rappel.
This is my rappel line right here.
Yep.
This is in your bag.
And this is not going through the ring.
Like I learned in the single systems.
So this is just a traditional.
You already have your single system ready to go.
And this is the beauty.
Is once you get this up.
Yeah.
You can start setting the first person down.
So that could have been me.
So I just do some mules.
Call up.
And I do some overhands.
I start making my way down the pitch.
And you could be working on that.
This is what you could not do with an isolated system.
Fun facts.
So once you mule overhand.
You're learning.
It's all right.
So this is my rappel line.
Rappel line.
But you still have to have somebody come up here.
And basically clean all this up.
So we'll get to that in a second.
Yeah.
This is what the anchor manager.
You build this.
You and I repel this right now.
It's your responsibility.
You clean it.
And nobody's up here.
Yeah.
Somebody's coming back up.
For sure.
Okay.
So let's say I want to release this.
Can you put a little weight on that?
Yeah.
Sure.
How much weight?
114.
250.
560.
Because we got it all.
Check out that video.
Okay.
So you got this.
And then I can go.
Do you trust me?
Unfortunately.
And if I like.
You're like.
That's good.
And I'm just like.
Boom.
That's close.
Is it?
Yeah.
I won't go anywhere.
What do you think?
I think I won't go anywhere.
Yeah.
You still have a repel device.
You just needed a little adjustment on abrasion or something.
I wanted to see if I could stop you.
Oh, yeah.
Not finish the job.
I'm the last guy to go down.
I'm going to want to clean this up.
Yep.
Because I know this.
This.
Magic.
Now, I don't want to just drop stuff.
Nope.
I probably want to put this back in the bag.
Remember.
Well.
It depends.
That's what you could do.
You could either pack that.
But if I already had enough rope going down the pitch,
you already have a pull line.
Yeah.
But what is that condition?
What does that set me up to have to do?
You remember?
That means I have to connect the bag.
Okay.
I'll go with that.
Okay.
If I have my pull line, I'll just do an eight.
You're going to set up my repel first.
Okay.
Because I don't want to start adding weight to this and not be attached to it.
Are you taking?
Yes.
Yeah.
I'm not taking the bag.
The bag's getting left up here because I feel comfortable with that for some reason.
Yeah.
You only learn that part the hard way once.
So now I got all my weight.
I got my pull line.
So if this bag doesn't want to cooperate.
It gets stuck somewhere.
I can pull it out.
And then I can start my repel.
No, wait.
That's me.
Yeah.
You get the idea.
And then I can pull my rope through.
Pull the rope through.
And then we just have to clean up both ends of the rope.
Because your double-ended rope bag is you got to stuff the middle back in until the ends are.
Right.
Ready for the next.
Seems like you kind of understood what was going on there pretty quickly.
I don't think so.
Because I actually have been studying this material to do this video with you for a while.
What?
This isn't my first time hearing about it.
What?
How could you possibly learn this, Ryan?
This is the only Canyon course you could possibly ever need.
Right?
No.
We'll be linking in the blog.
Where all this content is.
Where you can follow in order.
Because YouTube recommends you whatever it wants to.
So the reason we joke this as a course set.
Is this is not the only thing you need to watch before you go down a canyon.
Please go with somebody who knows what they're doing.
If it's the first, second or.
Honestly, until you know what you're doing.
Even if I can demonstrate this on the wall.
After highly editing out all my mistakes.
Still, I wouldn't go down a canyon without understanding a lot more than just a couple
rope tricks.
There are Canyon courses that we will link to in the blog.
The blog is always going to be in the link in the description.
It's going to guide you the way I want you to see these videos.
In order.
And this is not the first video of the course.
So if you're just now seeing this.
Click this for actually making it the end of a video.
You're probably lost in.
And go watch the overview video.
That leads into why we have the different single twin.
And then the next ones will be the double or doubled system.
So where it's kind of like basically how a climber repels.
Where we put the rope through here.
A little teaser.
And you have basically both strands.
And well.
That should be a short video.
You think?
Subscribe.
