THE WORLD's CHEAPEST MK4 SUPRA | VLOG 04

Broken Silvia
74 followers
11 Video Views·Jul 18, 2021
Baby steps towards a fully restored 1993 Toyota Supra! In this Episode I bare metal the forgotten Supra and put it on the rotisserie. In upcoming videos I will be showing all the bodywork involved before finally painting it and re-assembly.
_________________________________________
Instagram: @broken.silvia
Contact: [email protected]
Produced by: Damjan Bradonjic
Episode 1, let's begin.
Alright, welcome back for another vlog.
Today I'm going to talk about the Supra.
I'm going to tell you exactly to the cent
how much I paid for this car in the year 2020
and how it is the world's cheapest Supra.
I really don't think anybody bought a cheaper one
in 2020 but comment below if you did.
If your uncle's dog's
previous owner might have done it.
But anyways, today's episode isn't overly exciting
it's just about paint stripping the car.
So you saw in the previous episode
what we started off with.
It was, you know, a relatively already stripped car
but in this episode, full paint strip
full bare metal, rotisserie
restoration, it's all happening
and at the end of the previous episode I did say
we got a bit of a merch giveaway happening
and if you guessed the colour, the engine
and how much it cost, nobody guessed how much
it cost, people came close.
The engine, I think everybody guessed that.
So I've screenshotted the first guy that got it right
and the colour, some dude got it bang on
the actual name of the colour
so I've screenshotted his name and I'll send
you boys out some merch once we get it made
the designs are finalised, let's get it into
the video.
So the first thing I did when I was paint stripping this car
I grabbed 40 grit sandpaper on a dual action
sander and I went over the whole body
I went over all the body panels
and what that does, it takes like the top
you know, the glossy or a bit of the clear
coat off and the scratches also
sort of go into the paint work
so when you actually pour paint stripper on it
it's more effective because the paint stripper can now
sink into this and if you're stressing
out like Damien, like seriously
why did you keep your windows in there
and look, the reason behind that was
this project was very last minute
I had maybe like 7 to
10 days before Mick, our window guy
could come out and pull out the windows and I just
wanted to get started on this project, now
pretty much I got a little bit pissed off
there were too many cars sitting around
nothing was sort of getting finished or started
and I was like man, I've got a couple of
weeks between jobs, I have to do
something and went meanie meanie
miney moe between this one and the black one
and the blue one was the chosen one because it was
already more stripped
now with a paint stripper
this stuff is nasty, like
if you get a little bit on your skin, you'll feel it instantly
this ---- starts burning like crazy
seriously, wear eye protection
I know you don't think it's going to happen to you
but it probably will, you're using a brush
and before you know it, a little bit flicks up
gets you in the eye and it's game over
man, that's the last thing you want to happen
but anyways, the way I did it, as I said
I whizzed the whole car with 40 grit
and then I grabbed the paint stripper, I poured it
and I brushed it on, but I worked in
small sections so then the chemical wouldn't
evaporate as quick and it would be more effective
don't do it like I did
I did it in a workshop, horrible idea
this place stunk like paint stripper for the next
freaking 7 days, especially if you're working
in a smaller garage, make sure you
are working in a well
ventilated area and also use the plastic
what the plastic does, it not only
keeps the fumes in on the panel
you're working, but it also stops the chemical
from evaporating as quickly
and overall it's more effective
now for anybody wondering, I used a
brand called CAM, C-A-M
paint stripper, just some of the local
stuff I could get and I used
4 tins, so I think it was 16 litres
all up, so I applied the paint stripper
maybe 2 or 3 times
most areas only got hit
twice and I made sure, I realised
you don't want to be stingy with this stuff
you want to put quite a bit on so it actually
is effective, if you just put a light
coat on it's not going to do anything
but then after a while, the paint stripper does it's thing
you scrape off most of the paint
but then body filler in sections still remains
because the paint stripper doesn't really eat
the body filler, it just eats the paint
so what I've found is
if I go in it with some 40 grit
it'll actually just sort of shave it off
it'll take it all out and it'll leave
it with a nice bare metal finish
that you later on want to refine
with some 80 grit, 120 grit
and then epoxy primer, now that's the way I did it
if you hit it straight away with
80 grit on the bare metal
I find the 80 grit sort of wears out really
quickly and it just starts polishing up and
heating up the metal, which is what you don't
want to do, the reason I use
paint stripper over any other
method is firstly, I had time
and I didn't really, there's no point of paying
someone to do it if I've already got time to do it myself
that was number one, secondly
I didn't want to
fully sand all the paint work off because that would
have taken A, a long time to do
and B, I risk
losing my body curves
because you get carried away
you want to rush because this isn't
a fun job to do, paint stripping
and before you know it you might round off
a body line that was once sharp
which is something I didn't want to do, I just wanted to get
as much paint off as possible with the chemical
and then later on just go back in
and just sort of touch up little areas
and hit it with some epoxy primer
as for the door jams, the engine bay
and the rear beaver panel and areas
that involve getting your fingers in there
what I should have done is I should have just
got paint stripper in there as well but I didn't
really think of that at the time so
instead I just fully sandblasted
these sections, I found a really old
sandblast in the back, our air compressor
didn't want to really keep up with it so
not something I would do again but yeah
that's the way I stripped it, sandblasted
that, sandblasted the inside of the doors as well
and yeah, it was all bare metal
and ready for epoxy, alright now
before I show you
the rotisserie contraption I built
and how I got it onto the rotisserie, I'll tell
you guys how much I paid for it, firstly
I'm very impressed that people do remember
that I had a 180SX which I swapped for the
Supra, so the real story behind
it is, I saw this car come up for sale
I think the kid, Macon
wanted about $3000 for it at the time
nobody wanted to pay, don't know why
idiots, so anyways
what happened is
I approached him, or I had
a 180SX for sale, something
happened, I don't know the full story, I forgot
but anyways, what went down is
I swapped my 180SX that I bought
with my mate Harry back in the day
and I gave him a low compression
RB25, total cost on
my behalf was $1800
straight swapped it for the Supra
and then I sold the gearbox out of
the Supra, meaning
this car cost me
$1550
and that's how it's probably
the world cheapest, now as for the
rotisserie, oh Danny wants to
go home so I'll probably take over the camera and show you guys
in a second, alright so as for the
rotisserie setup, eBay, I don't know
I think this is 2000kg capable
whatever that is converted, and
I just went custom mounts
into the body, into the back of the car
with some high tensile bolts
so that's pretty much the back of the car sorted
now as for the front, I definitely didn't
make it as nice as Mickey made mine for the Skyline
but you know, did it myself
and it's still holding up which is happy days
so I went again, high tensile bolts through
there, massive 6mm
plate, probably should have gone 10mm, no big
deal, so that goes
through there, into there
so if anybody's doing it from home
probably wouldn't do it this way again as you
can see it's a little bit on the piss
I'd go somewhere from about
there, check out Paul's one, Paul
Roseboom or Rozboom, I'm not too
sure how you say the guy's surname but
he made a nice one, so as you can see
all this footage is from the future
and I'm sort of just retelling the story of what
happened, but anyways
it was a Thursday night, I think
exam period just
started so I had like 2 weeks off, well
2 weeks I should have been studying which I didn't
and I was building the rotisserie
and I get a phone call, I was at the workshop
really late one night from my mate Tim
in New South Wales, random phone call
and yeah
I ended up in Sydney somehow
Just don't ever try to play me
These are rules I'm engaging
I sit back in the back and wait for the perfect time
Seem to don't have the time, wish I could
reverse the time, give me time
Pretty little thing, give me love
Buy the sippy cups, give me y'all
Finish up, zip it up, this is lust
Woke up in this kitchen, said I need that, need that
Shawty caught my eye, said I need that, need that
Let me get a feel man, I hope it feel real
I'm the fuckin' real deal
Woke up in this kitchen, said I need that, need that
Shawty caught my eye, said I need that, need that
Let me get a feel man, I hope it feel real
I'm the fuckin' real deal
