Let's REBUILD the R34 Skyline AGAIN | VLOG 18

Broken Silvia
74 followers
29 Video Views·Apr 10, 2022
Tristan's V12 Supra Build - a lot to learn from him
https://www.youtube.com/c/QUICKSHIFTtv
The R34 Skyline aka "The Poor Man's GTR" is back! This time round the car is being rebuild the way it should have from day 1. Unfortunately in past, the lack of funds, patience and experience did not allow me to have the car the way I envisioned it.
Full Playlist of videos filmed on R34 Skyline Rebuild (V1.0 of the car)
https://youtube.com/playlist?list=PL3Gvt_afaDjXxUALNdfri1000eYcOsxs7
_________________________________________
Instagram: @broken.silvia
Contact: [email protected]
All right, we're back for...
Where the f**k we're back for?
F**k, f**k. Restart, restart.
You don't have to do all that again, just do a...
Was that good?
Should we do that again?
Yeah, let's do that again.
No, Supra!
Man, this is like the third take and I'm cringed.
I hate talking to the camera
but we need to do this R34 update.
Where the car has been, what's happening with the car.
Long story short, we're putting an RB26 in it
but we're missing the entire front end off the car.
Ah, let's get into this update.
So, Bayside Blue, I painted the car twice.
The first time, I stuffed it up.
The second time, I got it right.
With the boys from Donnybrook Accident Repair Centre.
You're thinking, well, if you're happy and you got it right
why are you missing a rear bumper?
Pan.
All right, let's go to the front.
Why are you missing the entire front end?
So, yeah.
Look, the front bumper
and the fenders were Z-Tune aftermarket.
I don't know the brand, I've been asked a million times.
They were good.
98% of the people would have been happy with the fitment.
I think they were maybe just a slightly
like a size too big
compared to the originals.
So, they had to go.
The bonnet is an original V-Spec II
that actually my friend Scott gave it to me for free.
We know that those bonnets are now $8,000 to $10,000 second hand.
This is a GTT.
I paid $1,800 for the entire show.
How does this car deserve an $8,000 bonnet?
It doesn't.
I built it as a driver's car.
Something that I can build.
I bought it when I was 19.
Today's my birthday, I'm 23.
A driver's car, I can travel Europe ASAP.
So, I got to build the car
sooner than I can buy a GTR.
I get to travel Europe and experience
because that was my dream,
sooner than buying a GTR and doing it with a GTR
if you see what I'm trying to say.
And...
Where the f*** was I going with this story?
But,
we had to make some sacrifices.
To do that, we had to build a car on a budget
which involved, as I said,
buying some aftermarket parts that popped up for sale at the time.
At the time, the budget was also
significantly smaller
and unfortunately, I painted the car the second time
with parts I wasn't 100% happy with.
The detail I'm trying to aim for nowadays
has surpassed
what we did two years ago.
So, this is the solution.
I've been messaged multiple times
about people complaining about parts going discontinued,
side skirts,
front ends, the availability of parts,
the expense of OEM parts,
and I've decided, don't message me of what's coming out.
We're working on something huge behind the scenes.
Full Z-tune dry carbon,
V-Spec 2 bonnets, it's all in the works.
I'm going to reveal it all when the time comes
but not just yet.
So, that's all I'm going to say about the front end.
The engine, let's go over here.
We've got an RB26.
Again, thinking outside the box.
Oi, don't go where the manifold is actually.
Can you see the manifold?
Nope.
So, for years I've been trying to find
this distinct note out of an RB, out of a particular car.
I've been researching
for years trying to come down
to what has made this car
sound so particular and I think
I have found the secret source
and I've made my manifold from scratch.
So,
I've teamed up with Tristan from
Quick Shift TV,
aka Tristan from WTF Auto, who's building the
V12 Supra. He's doing the whole car
in CAD or on the computer, 3D printing
it, making sure that these parts fit
and then creating it out of billet.
So, this educated me on the world
of 3D printing
and the power of it. So, these are
actually hyper-tuned bends that you can purchase
for making an exhaust manifold.
They come in a variety of different sizes, which we have
here. These are all 90 degree bends,
also split into
45's. So, I've completely
calculated my manifold to the desired
amount or the desired spec that
I want, after doing the research that
I had to do. And we found
that I've now completed the manifold
out of these and we've ordered the metal once.
So, it's nearly done. We're probably
about 3 or 4 weeks from this manifold
being done. Now, I can't test the manifold
before the engine is complete
and we have a running car.
This is an RB26 cylinder head.
Now, the reason I did it is because
solid lifters. When you go hydraulic lifters,
you're only limited to about 8,000 RPM
before you have to change it to a
solid lifter. That is about $1,000
$1,000 plus dollar exercise to
convert your normal RB25
DET being a Series 1 or a Series 2
to solid lifter. So, you might
as well put that money towards a 26 head
or even better, in my opinion,
an RB25 Neo cylinder head.
Now, I couldn't justify the cost of
spending $2,500
on an RB25 Neo
DET cylinder head because
there are still some drawbacks such as
I need a solution for
the intake side, while for the 26
the solution was already there.
Stay there for a few seconds.
So, the
RB26 individual throttle bodies
being the plenum, so we have another
2 sets of these being the 6 throttle
bodies and the last runner
which includes where all the injectors
and stuff go. I picked up a full set
for $400. I want
individual throttle bodies. It gives you that nice
blippy motorbike feel. It's just a very
visually appealing solution as well.
Now, to adapt that
to a 25 is slightly
a significant amount of work which I was
prepared to do and showcase it so you guys
can do it as well, but I've steered
away from it and I've decided to
just buy a 26 head for $2,400
with some Tomei camshafts
second hand. It's already got those
solid lifters and I know for a fact
that my 26 ITBs
will bolt up and I know that
the sound I am chasing
will definitely or most likely
be there. Even though the RB25
Neo has the same ports as
a 26 and is a more modern cylinder
head, it's not a cylinder head that was carried
from 89 to 32 all
the way to the 34. Instead, the Neo
was produced in the late 90s.
It was just a more updated head.
I'd love to talk more about it, but my friend Tim
is going to get real pissed off at me because he's done the ground
work to figure out what's so special
about the 25 Neo so I don't just want to go
spill it out on the internet. But, long story short
that is potentially the
best cylinder head and more GTR owners
would probably be using it
if it came into
GTR, which it didn't, so purity.
Now, you're looking at the block.
The guys that know what they're looking at will realize
that is not a 4WD RB26
block and I don't need it.
I was thinking about going 4WD
and that adds a huge cost.
All of a sudden, you have grip, you want more
horsepower, you start breaking stuff,
you need block braces, you need expensive
transmissions, and before you know it, I'm going to
have this super expensive car
that most of the time probably doesn't
run and I'm getting further and further away
from my goal of traveling Europe.
So I figured, let's just keep it simple, keep it
4WD, 5600 horsepower, which will be more
than enough and that's where RBs love to be.
So, I bought an RB25
just, they're all the same blocks.
The only difference is they're naturally aspirated,
had no oil squirters,
and the turbo models had oil squirters.
This one in particular is the turbo
version, doesn't really matter, once you go
forged pistons and rods anyways.
So, what I've done
is I've purchased
an RB26 crankshaft,
500 bucks, anyone doing a stroker build
or whatever,
these are floating around for
close to nothing nowadays. Let me put that back.
So the 26 crank
goes into the 25 block
like it's nothing, just bolts in.
And then we just
used 26 pistons and rods, we're probably
going to go Nitto or something else
aftermarket forged because it's a bare block.
And for a fraction of the cost, all of a sudden
we have an RB26 long
block that suits my application
being rear wheel drive. For
the same amount of money, a
stock RB26 that's been
flogged out for the last 25 years would cost me.
So, new engine,
stock shitty engine, same price,
you do the maths. Cool, that's the engine
sorted, we're just using it for mock-up right now
as just a bit of a dummy.
The car's going to get fabricated, once that exhaust manifold
is done, the whole car's getting fabricated.
In terms of transmission that's going to go into this car,
I want a DCT
for so many reasons, like travelling in Europe with
a DCT gives you a nice spread of gears
to be driving around town, to be driving
through the mountains, overtaking is a big deal.
In Australia, like, no one even does the
speed limit on the ******* freeway, like,
let alone, you know,
anywhere else.
So, in Australia, it doesn't really matter, like, you can be
driving a three-speed, and, like,
the first three gears is more than enough,
like, it's 60, 70, 80,
no big deal, but, when you go into Europe,
you need overtaking, they've got high-speed
limits, so you need to lower your RPM
to get somewhat some fuel efficiency,
that seven-speed DCT made the most sense.
After doing a lot of research and
talking to people that have actually completed DCT
conversions through MAC ECU, HTG
GCUs, it seems to be
that a lot of people are complaining
about the HTG GCU being too
immature to be used on the street.
Not hating on the brand, some people might have great
success, some people might not have great success.
I'm just saying, I'm not prepared to go
out and fork out maybe $10,000
on this conversion, and then it doesn't work.
In saying that, now,
you guys are going to cringe, but, I've been driving
a Volkswagen Jetta, yeah, bros,
and it's dual-clutch, it's one
of their, what do they call it, DCT,
SMG, no,
DSG, it's DSG.
And, it's really nice to drive,
but it gets boring really quickly, and I figured
I don't really want that in this car.
So, I've gone back to my idea of CD009
with a 411 diff ratio.
It's not going to give us the best highway
140k an hour cruising speeds,
whatever, doesn't really matter. It's going to give
us a beautiful spread of gears
to the point where this car's
going to be really snappy, even with the
larger size turbo. The reason I went
26 or solid lifter being the
main goal, is to increase the RPM.
The RPM will give me a wider
power band, and will also
allow me to get the
sound I want. These engines
really sound good with a lot of boost in them,
and a lot of RPM. So,
we're just, with the boost, we're going to be limited
to, due to pump fuel, we're not going to go
ethanol, but, the RPM,
we're not going to be limited to, because
we're going to set the engine up to take it, and
the turbocharger. So, that's it.
6-speed CD009 I'm going to buy
from Nissan, brand new.
4x11 diff gears, that'll be a really
nice spread of gears. Full dry carbon
front end, produced by myself.
Brembo brakes, so 6 pot fronts,
4 pot rears. I'm talking to a guy called
Jarrett in the US,
and he's coming up with a solution, happy to promote
it. It's a very nice and cheap
solution, to the point where
the only thing you're out of pocket for, would be
the calipers and the adapter bones, because
when you're doing a rebuild,
you're going to be buying brand new
brake pads and rotors regardless,
so let's not include that in the cost,
and the actual calipers are dirt cheap.
I'm talking like 200 US dollars
for a set of big 6 pot
Brembos, and then for the rears,
we can buy them brand new for about 500
Aussie dollars, and they're 4 piston Brembos
for the rear. As for the interior, I've been
doing a lot of thinking, how we're going to make this thing
look like a GT-R.
So,
oops, we need an
MFD, I've already got the centre GT-R
steering wheel, that's sorted, we need seats,
we need an MFD. MFDs,
I've seen a lot of options, we've got Motec,
you know the big screen, it's very expensive,
I don't like the big screen personally,
I think anything bigger,
anything bigger than this, doesn't belong
in the car. Your child's little
iPad, Android tablet and bullshit,
man, **** that.
You completely ruin
the look of the car, in my opinion,
so I've decided, to do
this. I picked up this Haltech
Racing Street Dash thingy, IQ3,
locally, brand new,
the guy never used it, and I paid
600 Australian dollars for it, and
this,
fits into here,
quite beautifully.
So we're going to end up with the solution, again,
I'm going to get this properly designed, and it's going to be
an item, that I'm going to produce out of plastic
or carbon fibre or composite, whatever it is, that I can
sell to the public, as a solution to the
MFD. This green right here, is visually
appealing, it's very functional, it's made by Haltech,
so obviously it does work. It's got all the
data that we need, plus more,
compared to a factory MFD. It's
cheaper, it's modern, it doesn't go ---- like the MFDs
do, and,
what else was I going to say? It's readily available,
which is important.
Another solution was to use a
smaller, something like a 5 inch screen,
and use this thing called
GageArt, but those controllers
are like $800, plus the screen,
and plus
all these things talking to
one another, I think you're going to end up with a very
laggy setup,
that's not suited, like we're trying to build
a budget GTR, not a ----
budget GTR. So,
I think the IQ3 Dash
is the only logical option
for an MFD solution,
when you're converting your car to a GTR.
As for the actual dashboard, see this is
one thing I really regret
not buying back in the day. For like
$1,100-$1,200 Aussie, you could have bought a brand new
Nismo cluster, black, white, you pick the colour.
They're like $4,000-$5,000 nowadays,
you can't get them. I'm almost going to have to settle
for an R34 GTR, normal cluster,
if somebody has one they want to sell sort of
for under $1,000, I'll buy it, otherwise
I don't see that as an option.
However, in saying that,
there might be an alternative, my friend Tim
repairs these clusters,
he's been working on something behind the scenes
where there might be a cheaper
option, so I'll let you boys know once I find out.
As for brand new parts, so we've got
the Haltech dash,
now we've got brand new
headlights. Again,
don't think I'm rich all of a sudden, but
my friend Abs
that works for Total Nissan, he really
hooked it up, he promised these a couple
of years back, I never really had the money or
could prioritise the headlights to be a
purchase. The moment they went discontinued,
they went $5,000-$6,000 for a pair
and he stuck to his word, he
kept a pair of them on the shelf for me.
I've still managed to purchase some R34
GT-R brand new headlights
for what they used to be back in the day, so
thank you Abs.
The exhaust system,
if Tommy Eff here, which I don't think he is,
but if he's watching, he's going to cringe so
hard of how I unboxed this.
It's a HKS,
again, I'm not all about
the Japanese wank,
sorry to be disrespectful to
any companies or anything. Personally,
I like form
and I like function, but I'm not
going to go out of my way and pay ridiculous
amounts for this nostalgia
tax or whatever you want to call it.
I guess I never grew up during those ages
where you guys used to watch all these
Japanese workshops or whatever build these
cars, so you're really attached to it.
I grew up in a completely different age,
especially in Australia where it's all
higher horsepower GT-Rs and mainly
single turbos. Twin turbos?
Nah.
Not for me, that's all I can say
without disrespecting too many people.
Single turbo all the
way, especially with the manifold I'm building,
that's going to be off its face.
The reason I got this exhaust is because
it was, shout out,
Wanted Motorsport for getting it in for me.
It's three and a half inch, this is
what I didn't know. This towel pipe is
three and a half inch. In there
it seems like it's three inch.
This is a really, really well manufactured
part. It was about $1,500
for the exhaust. For me to go out and buy
some quality mufflers, so we need two mufflers,
we need a heap of pipe, and
we need Dan
to put it all together. Once you add
everything up, you're probably not too
far off $1,500. Now you can do it with
cheaper Chinese mufflers, but what's the point
of even doing the job in the first place?
I know that the car that I'm trying to replicate
the sound of, this is the exhaust system
it ran, so I just ordered the same one
that it ran. That was the most
logical thing for me to do. Moving over,
I've never done this. Back in the day
before I even owned an R34,
I did really do a lot of research
into what I want. Now
if it was a GTR, maybe my wants and
desires would be a little bit different, but I think
I always knew that I was going to end up with a fakey.
What I was going to do with it? Starting this YouTube channel,
meeting everybody I've met along the
way, this has completely
transformed my vision and my life
as well. I would never have got into
restoring cars or producing carbon
fibre parts if it wasn't for this YouTube channel
and all the people I've met. This was probably
never on the list of parts to purchase.
It's an AES dump valve.
It's a 3 inch and that
exhaust is mega, mega quiet.
It's been designed, I had a peek inside
the muffler. It's not just your hollow
straight through muffler. That thing
is super dense, should really quiet
the car down. Now two 40mm
wastegates weren't enough to make this thing
loud. We've got a 3 inch
dump pipe, dump valve.
Pretty much this is going to be in the exhaust system
sort of as a bypass. It's going to
be wired up to a switch. Now how you can do
these is, it's got a solenoid
and you can actually do it where
it senses boost pressure, it opens up
that flap and the car becomes louder.
How I'm going to do it is just on a switch, like an
on and off thing. So if I want to be
loud, I just keep it off.
If I want to be f***ing loud, I just turn it on.
So cruising speeds,
I think this will be beautiful with this exhaust
but when it gets on gate, regardless
it'll be super loud. If it gets on gate
and this thing is open,
it's going to be mega loud. But I think it's going to give us
a really, really nice note.
That's sort of all I can tell you
for an update at the moment. The fabrication
should be pretty epic on this car as well.
Nothing that hasn't been done before. The manifold
is pretty funky though. But,
all the intercooler piping is just your usual aluminium
mandrel bends. 3.5 inch dump,
you guys have seen it, we've already done it.
Another talking video, but I hope
you guys got a bit of an idea of what's happening
with the R34 and my craziness
and desires to make
it nice again. The wheels,
I tried ordering some through Jesse Strader,
the Inkey RS05RRs.
No ETAs,
not even 3 or 4 or 6 months,
nothing. We don't know when they're coming out.
I was like, ----, they're really the wheels I wanted
but I can't even get them.
Let me know in the comments below what you might want to see
in the future from the R34 Skyline
or what you might want explained in a little
bit more detail. But for the most part,
that is it. Catch you later.
Whitty Kelly
f***
