#246 Stihl MS462 Upgrades! Cutting firewood

The Kelley's Country Life
18 followers
All right, well, welcome back, everybody.
So if y'all caught it a couple episodes ago
and several episodes before that,
I told you I had some goodies for my MS-462.
I've been waiting until I ran several tanks of gas
through it, plus I had to order these few little items.
And like I said, I just kinda wanted to get it
somewhat broken before we had these on.
So without further ado, let's remove the bar,
clean the power head up, and we'll show you what I got.
All right, as y'all may know, I am a huge steel fan.
Love their products, but one thing steel has always,
and I mean always, done a very bad job of
is these factory dogs.
I mean, on a saw this big, that's the little flimsy dogs
that comes with it.
Can't stand that.
I just put a set of metal dogs on my MS-170,
and luckily my 260 Pro comes with probably an adequate size
for that type of saw.
But for a 462 and a bigger saw,
that's just not gonna cut it.
And you can see exactly what's happening.
I am chewing the front of my brand new saw all up
because every time I'm going into a tree with thick bark,
these dogs are so tiny that I'm just grinding it all
in the front of my saw.
So we definitely need something a lot bigger.
I shopped around and was gonna go with a steel set,
but I stumbled across another website
and found a set I kinda like, plus I like to cook.
So this was probably a sin being an East Coast guy,
but I went on West Coast Saw's website
and found a set of very heavy duty,
tempered alloy dogs.
These look sweet.
Plus I already kinda like the black and white theme
that the saw's got going on.
So I figured black dogs would be nice.
Ain't crazy about the paint that's on them,
but these are supposed to be very, very robust.
And it already has the holes on the bottom.
Decided I'd add the chain catcher too.
So let's go ahead and add these.
And the chain catcher here come with all the hardware,
and then we got some more goodies too.
So just for a quick comparison,
factory dog, pitiful.
Aftermarket dog.
I'm running a 25 inch bar,
so I don't mind that I'm gonna lose
probably at least an inch of bar.
Could care less.
I've got plenty of bar for what I'm doing.
And these will bite in any bark of any tree
I have around here without scraping
the entire front of my saw up.
And it should really bite and let the saw do the work,
not make me do the work.
Oh, that already looks better.
Now this is one reason,
another reason I decided to go with the West Coast Saw.
Believe it or not,
I've watched several YouTube videos
of people buying the factory steel upgraded dogs,
and they would not fit right here.
They had to actually grind and relief them
in order to fit on here.
That kind of blows my mind.
How would a factory set of dogs not fit a factory cover?
I thought that was crazy to have to do that.
So it's another reason why I decided to go ahead
to support this company,
go with their absolute perfect fit,
the way it should be.
All right, and if you'll notice,
the steel cover already has a notch out
for a nut to fit right in.
That's pretty nice.
And these come with locking nuts,
so it doesn't look like Loctite's needed,
but I'll keep an eye on them.
Also a nice touch.
Looks like it has an extra nut there too.
So should I lose one, I'm ready to go.
Again, I'm not crazy about the paint,
but that'll probably come off with time.
All right, now let's install this chain catch on there.
Never had a chain catch before,
so I don't know which side mounts to what.
Y'all drop that in the comments.
I'm just gonna go ahead and put it on the cover itself
and make it slide in the other side.
I don't know if it goes one way or the other,
but I noticed that the bar sticks out a long ways
if I mount it to the other dog and slide this on.
I'd much rather have something sticking out a lot less
on this side.
Comes with a tiny little snap ring.
Just slide that right on.
I can probably push that snap ring right on here.
All right, one thing I really like about this set of dogs
is this huge flat bottom now.
So the saw actually will prop up.
It's almost like a stand for it.
Boy, that looks a whole lot better.
That's how it should come from the factory.
All right, so another goodie I decided to get.
Some of y'all may agree or disagree with this,
but West Coast Saw makes a nice TIG welded,
what they call bark box.
It's a new muffler.
We all know that these chainsaws nowadays
with all the regulations that they have
come quite restricted in the mufflers
and simply opening them up
does quite a good job of increasing power.
Do I really need a whole lot more power on the saw?
Not necessarily, but it's always nice to have.
Plus I'm very curious about how good this is gonna sound.
But as you can see, nice, thick, all stainless steel,
TIG welded, still comes with a spark arrestor,
but pretty open.
Plus I'm kind of curious how it's gonna sound.
Maybe it's the kid in me
that used to like mufflers on his truck,
but I wouldn't mind if this sounded a little throatier,
maybe even a little louder.
I don't cut at 6 a.m. around here anyway,
so middle of the day,
I don't care if this is a little louder.
Plus I'm really curious to see
if it's gonna open the saw up a little more.
We're actually gonna do a test.
I'm gonna go down and run this in stock form,
make three cuts on a piece of wood.
I'm gonna run this with a bark box for a little while,
let the M-Tronic tune itself,
and then we're gonna make some cuts with that.
They make some pretty bold claims with this.
I've seen a couple people online doing tests.
They claim 6 to 10% quicker cutting speeds.
That's pretty big in my book.
That's a lot of power increase.
I've seen a lot of muffler mod saws
really pick up, rev, and pull harder than wood.
Maybe that's the case we're gonna get with this right here.
They also have a very nice oilable foam filter
that I almost got.
I'm really considering getting.
I do like these Twistlock factory filters,
but I'm wondering if this saw being opened up a little more
could really benefit from one of those foam oilable filters.
I'm gonna think about that one for a little bit,
but if any of y'all have the West Coast foam filter,
let me know if you like it.
All right, so here is the factory cover.
All it's doing is just forcing air
out the side small hole exhaust.
No holes in this whatsoever.
So this is a bolt-on front cover
that gives you even more opened up airflow now
while still utilizing the factory hole.
So you're getting quite a bit more open surface area there.
I tell you what, before I completely bolt this on
and put the factory cover back on,
we're just gonna go back there
and start it without the bar.
We won't rev it and we'll just listen to an idle
and I'll do it before and after.
Then we're gonna do some wood cutting
and really open this thing up.
So I'll see y'all outside in just a minute.
All right, factory exhaust, idle only.
All right, West Coast Saw's BarkBox, idle only.
That sounds mean.
All right, I love the way that sounds.
It's got a deeper kind of a thunder to it
and a little bit of a pop.
I really like the way that sounds.
That sounds like a mean saw
and hopefully that's gonna help open it up
and make it even stronger.
We're about to find that out right now.
So let me get the bar on this thing.
We'll go down and do some time cuts, stock and modify.
All right, so here we are with a saw
the way that it's supposed to look.
Those dogs look absolutely awesome.
That muffler looks amazing.
That stainless steel shining in the sun.
So let's see, I'm trying to think
of how I really wanna do this to be fair
but I think the best thing to do is I'm gonna crank this up,
let it idle for a little bit
because I know the saw's gonna need
to tune itself differently now
with this increased air flow and exhaust flow.
Then I may actually sink it
in a few of these big pieces of wood
to really let this thing tune itself,
touch the chain back up to make sure it's just as sharp
as whenever I just cut a second ago stock.
I'm about to show you that comparison
to try to give as honest and fair of a comparison as I can.
I'm sure no matter what I do,
somebody's gonna say, hey, that wasn't fair
but at the end of the day, it's my saw.
Ultimately, I'm the one that has to be happy here.
All right, so let's fire it up one more time.
I wanna see how this sounds
before I put my hearing protection on.
Let's do it again.
We won't know if that was quicker
until I go crunch some numbers
which I'm probably about to throw up now.
And just for fun there at the end,
and I figured I'd do the old rocking motion
which you see a lot of people do for time comparisons.
A lot of people don't agree with that,
but hey, I figured I'd try it to see
if it was any slower or any faster.
But just letting the saw work straight through,
let it do its thing.
Although to me, it actually felt faster rocking,
but I think that's a mental thing.
So we'll throw some numbers up and take a look.
I think I'm gonna do some more cutting
while we got this sweet saw down here.
Why not?
Okay.
Holy moly, y'all.
I have got one heck of a mess out here.
Look at this
Absolute carnage. I mean there's
Look how deep all these noodles are
So now I got to figure out what to do with a lot of these noodles
I'm thinking I'm gonna take some of these and bury in my compost pile
They should break down nicely in there, but I don't want to put too much of
This in there because that would that wouldn't be a good balance for the pile
But I'm always thinking about storing some in some buckets too and letting it dry out and using it for like a fire starting material
I think it'd be really good for that
But if y'all have any ideas about all these noodles, I plan on making a whole lot more in the future
Let me know something I can use them for but like I said compost fire starters something. I think I'm gonna save them for
so now the plan is
To get to splitting. Oh
Boy, do I need to split? So what can I say?
This saw is bad
It is awesome. I absolutely love it
I'm still out here smiling and giggling every time I run it because it's so nice for the first time in my life
I have plenty of power plenty of power and even though I haven't went back and looked at the video yet
I don't know the numbers. It sure feels like it's pulling stronger with that very simple mod right there
I don't know if an air filter would make it even stronger or not
That's something to to be determined for the future
But as of right now, this saw's got all the power I could possibly want the muffler sounds awesome and dang boy
Dang that saw feels faster
Now, I don't regret the purchase regardless
I love the way it sounds unless I go review the video and realize that it slowed my saw down dramatically
Then we might have to rethink this but even if it's the same, that's okay. It sounds so mean so good
I really like it. I mean chainsaws already loud. So if it's a little bit louder doesn't matter
I wear hearing protection. I have no neighbors. So not really disturbing anybody. Oh
man, the dogs love the dogs a
Must-have upgrade I strongly recommend them
Very nice. Actually, I found myself working this all
Extremely hard because of the dogs now the saw bit in so well
I felt like I could really really torque on it now
So I had to kind of back off a little I mean I was pushing the saw hard
It's so nice having something that's really biting in the wood now
I could tell a huge difference there and they stick out so far now won't be eating
The front of my saw up digging all in it gashing in the plastic and just kind of screwing it making it look worse
So I must have upgrade without a doubt right there
So man, I'm looking forward to running this off some more. Although I am I am beat
That was so much cutting and bending over. I forget how many tanks of gas I went through but it was several
I think I'll officially call this all broken now. It might need to turn a little more with the new exhaust but
Man super super impressed by this all if you're thinking about getting one or you're on the fence get it
It pulls this 25 inch bar like it's nothing. I don't see why I wouldn't pull a 28
Maybe even a 32 I've heard some people say that's bigger than I need around here
But the 25 is perfect for some of this big stuff that I do get and I do plan on getting more of it
But absolutely do not regret my purchase
Hopefully y'all enjoyed this whether you agree with the upgrades or not
My personal saw my personal choice there something I kind of knew that I wanted once I seen it a while back and
Definitely don't regret the dogs. We'll find out about the muffler seeing how this all runs in the future
But right now it's running like a scalded dog
So we'll go back and look at the footage and see if it really makes a difference that they claim that it does
So hopefully y'all enjoyed this. We will catch you on the next video
I know the video that I released before this one. I recorded I'm actually still recording it right now
So that's why you're gonna notice
Hey, I've been watched some video and some of that was already cleaned up and split and back and forth
I decided to make two videos today and being I want to compare this saw to stock
It was the proper time to go ahead and bring it down here while I was already cutting for the other video that hopefully you've
Done watched. All right
So real quick before I forget our channel is approaching a big milestone at least for us here in the next few weeks
We should hit 1 million channel views
So even though we're still a relatively small channel
It's something we're quite proud of and we're also about to hit 5,000 subscribers
We may have actually hit it by the time that you watch this
So we're thinking about doing a small giveaway for the 5k
Subscribers and a little bit larger giveaway for the 1 million
All that you need to do is do what you've been doing like these videos
Subscribe to the channel and most importantly drop a comment down below
Let us know what what you do like about these videos. What I'm gonna do is pick a random video
then I'm gonna pick a random comment on that video and
That's the winner so we're trying to make it fair and open for everybody
So I just made that announcement the other day all the videos I'm posting up until the day
We hit that 1 millionth view. Those are the ones that are eligible
So drop a comment on all the rest of the videos that will make you eligible for it
Like I said, we'll uh, we'll pick that winner pick that comment
We may do a live stream or post another video out there and y'all can see how we're gonna draw and pick whoever that winner
Is so again, thank y'all for the support
I'm having a blast making these videos and truly truly do feel blessed that I get to spend time out here doing this
And it's all thanks to y'all and your support for the channel. So we'll catch you on the next video
