It was a late night install, Matthew got pretty sick and was throwing up all day and wasnt having a good day, by 11 he finally fell alseep good. Mommy was with him so i had my chance to do an LED upgrade on the F350. Hope you guys enjoy the vid, i really love how the LEDs look. Thanks guys for watching.
•REPAIRS New wheel - $310 New tire - $130 F350 Pair of leaf springs - $240 F350 RH leaf spring sold - ($ Driver dually fender - $450 Driver dually fender refund - (-$400) Another Drive Dually fender - $400 Taillight - $20
•UPGRADES• Floor mats - $30 Tailgate Assist kit - $50 2" level kit - $60 Smoked Clearance Covers - $15 Smoked Marker Lights - $20 Orange LED Bulbs X8 - $40 Red LED Bulbs - $10 White LED Bulbs X10 - $15 3 LED Rear Bag - $10 Bed LED kit - $15 (install vid coming soon) RiffRaff Intake kit - $100 (install vid coming soon)
Total Cost: $8,640
If, for whatever reason you find it in your heart to support our channel and our family projects to help us grow faster and be able to do more mod/upgrade vids sooner, here is my paypal. [email protected]
All of my Music is Copyright Free and I get of my music from a lot of sources. Here are the channels bellow that offer these songs that i use.
Hey guys, what's going on? Welcome back to the channel. So right now what I'm gonna do is I'm
gonna do the marker lights on the side. I got the smoke lights today and I got the LED light bulbs
as well. I wanted to do this install a little bit earlier. Right now it's one in the morning.
Good thing you don't have to make any loud noises. So I want to do this as quietly as possible.
Matthew got pretty sick today. He was throwing up all day. He is finally sleeping. Took some
medicine. Ate some chicken soup. Hopefully tomorrow he's gonna be doing a lot better.
So that poor guy needs to sleep as much as he can while dad does a little bit of work on the
truck while he can. So what I'm gonna do is I'm gonna swap the lenses right here. These two with
smoked ones and also I picked up a LED bar, the three lights on the back. I got that one on Amazon
for I believe $10 and it's not the exact one but I'm gonna go ahead and swap this one over because
I didn't want to buy just this middle one because I don't even think they sell just the middle one.
You have to buy all three of them together and to me it wasn't worth it if that one went out.
I'm sure these are gonna go maybe, I don't know. So I pretty much bought a three LED bar
so I'm gonna change that over. So let's see what these look like stock. That's what we got. I'm
gonna do a little video from here. So here we go and now we're gonna swap them over, put the smoked
ones on and put the orange LED bulb in here, red one in here and see what it looks like.
Alrighty, let's go. Alright so I removed these three lights on the back and I was looking at
this bar right here and I noticed since I bought this it's a universal LED bar. I wasn't really
thinking about mounting points or whatnot because I can always use these holes and make my own
mounting holes but the stock one as you can see is a lot wider so these holes will be over here
so I think that will look kind of goofy. So what I end up doing is I removed these top ones
like so and then the edges right here were kind of sticking out all the way to this spot right here
and then what I end up doing is using a Dremel tool and just kind of removed the edge right here
pretty much on all four corners. Some right here, right there, right there. You can kind of see why
I did that right here, right there. So what I figured I'll do is I'm gonna slip this thing on
the inside like that. That way it slides right over this new bar and I retain my stock bracket.
I think I'm just gonna spray a little bit of black on it. So basically that's gonna sit on
the inside and on the back it's gonna be sitting a little bit more in and what I'm gonna do on the
is I'm gonna put some kind of adhesive on these spots right here. One, two, three, four. That way
when it's touching the metal it's gonna adhere to those spots and it won't be rattling around
inside. I mean it's fine right now. It's gonna be just fine the way it is but I want to have
just a little bit of a security on the inside in these two spots and then the second part
what I have to do is this is the harness that was connected to underneath the bumper. It's a stock
harness and I'm gonna cut the wire right here, connect this wire to a positive and then I'm
gonna run a ground and connect that to one of the screws maybe here or there. It doesn't really
matter. All right let's get this done, install this and then check out the whole truck and see
how it looks with LED lights. All right guys so the light bar is done and I decided to give
these guys a shot again. Some of you might remember I tried using this underneath the dash
and I was having a hard time melting the solder onto the wire but after
doing some more practicing you can see that basically it worked out really well. As long as
you get the wires tangled up together pretty good and the solder is right in the center above both
of the wires then it solders it pretty good. I used a little heat torch to get it right on the
solder in this area and then I use the heat gun to shrink the whole piece together and then
when it cools it's really nice and solid and it's watertight so I don't have to tape it up or
anything. So that's pretty much done and then I did the same thing over here. I did the extension from here
to there and then I did the ground right here to this little screw and shrink wrapped
this spot as well. So now it should be ready to go and then the JV weld which I used on the bottom
you can see there's a little bit right here that's nice and hard now and this whole piece
pretty much becomes one big factory LED upgrade and I sprayed the plastic a little bit just to
kind of give it a newer look to it. So let's put it back underneath the truck and see how it looks.
Alright guys she's all done so now let's get the lights and see how it looks. Alright and it all
works looks really nice has a nice crisp flare to it just like the lights on top there and here's
this side right here. Let me see if I can compare the roof ones to the fender ones. So we got the
roof ones the fender ones they all match because I was using the same LED bulbs here and here so
and those are smoked and those are smoked so it should be pretty much identical.
Top from this side that one yeah I really gotta do something about those taillights.
Maybe I'll get LED bulbs bulbs for now and then eventually I wanted to upgrade to the
newer taillights and it and the newer tailgate that's going to be later down the line and I
still have to do this light as well. I'm not sure I'm not sure what bulb it takes up there
so I just gotta open it up and check it out and pick a LED one for that as well.
And yeah let me do a little comparison from this same spot where I did in the garage right here.
So now I'm gonna go to the stock one and here's now the LED bulbs. So yeah I really like how it
gives the truck a little bit of a new truck touch in a way I guess. So guys I hope you enjoyed this
little video. If you're new to the channel please subscribe, hit the like button, hit the bell,
comment below, let me know what you guys think and I'm gonna have more upgrades and mods coming
up soon for this truck and a Silverado and so forth. See ya!