Installing a Vintage Hanging Light in the Studio 3/13/2026

TV Electric Fan
2 followers
11 Video Views·Mar 14, 2026
Installing the final hanging light (for now) into the studio. The light was rewired and the chain length adjusted to fit the applicatio n.
One more vintage hanging light to install, at least for now, here in the studio. This is one
that I picked up at a Habitat Restore near Kevin's location, and this is, I envisioned putting it in
the kitchen when I first saw it. It's fairly narrow, but very long, which is the shape that
I want to have over the kitchen counter table. I mean, what is it, the island is what it's called.
I think it's really nice over there with the correct ceiling fan on the other side. So at
some point we're going to try that, but for now I'll hang it up here in the studio. I mean,
might as well have it set up here in the studio in the off time that it's not in the kitchen,
because it's certainly not going to be in the kitchen all the time, because then
I can't do a triple ceiling fan install. I could still do it too, I suppose, but it's
going to be out of whack. So it's going to come in and go from the kitchen, and I guess be shared
with the location down here. So I have a cord in here, which I'm hoping is the right length.
I have this cord here, and I want to see if it'll work to be able to plug in
there, and oh yeah, that'll work great. Okay, perfect. So if that plugs in there,
do I have any swag chain I could put on here? I think I do. Here we go. Here it goes.
All right, so let's see what we should do here. We'll probably do, I had to go get a little
hook or something, a little cup hook. We'll set it there, and we'll hook it maybe once,
and then we'll go over to the light. So this is actually pretty much the right amount of chain.
How does the length of chain compare to the wire? It's right about the right amount of wire too.
I don't like these switches. I feel like they're a fire hazard. I'm just going to cancel it out.
Well, of course, we're not going to get rid of it, but I'm just going to dismantle it for now.
So we'll connect this wire in this chain, and now the light has, the light is working, but the
integrity of the wiring is of unknown condition. So I'd like to redo it
just so that we don't have any problems. Of course, there's an indiquescent bulb in there.
This indiquescent bulb is a Softlight 100 watts. So there's our socket here, and let's take that
off. I'm not sure how this one works offhand, but let's see. If we undo these screws, does
that release? Oh, that's very loose. Well, both of these screws are very loose. It's a good thing
we check it. Well, that doesn't look too bad, but we'll go ahead and swap in the new cord to make
it cleaner. Not great, but far from the worst I've seen. I don't know what that is. It's kind of
peculiar. The mounting apparatus is pretty tight. I think we'll leave that alone. It seems fine
still. So now we'll feed. I got to put the chain on this cord, and then we'll feed the cord in.
Because this is such a short run, I'm just going to put the wire through every
loop. Normally, I wouldn't bother to do that, but in this case, I will.
The heat pump has defrosted so many times today because it's so wet out.
Let's prepare the wire before we put it in there.
Take a couple steps to make things easier. This is probably 18 gauge.
So,
I always like to work on these outside of near where the
glass is, because if you drop this in there, you're going to get a crack.
Now, this is polarized, so we'll take note that the high side is not textured.
So, the high side goes on the lighter colored terminal here. I think in an ideal case,
we would put some solder on this wire first and tin the wire before closing the screw,
but we're not working in an ideal case.
Okay, wires are connected. Now, let's get the socket back in place.
Now, I do have the globe for this, and I also have the wires.
I have the screws, but what I don't have
is the information about where they are located in the building.
So, we're going to have to go without that stuff for now. I don't think that this is aligned properly.
No, it's definitely not, but I can't see to get it there.
All right, now it's aligned properly. I might have to put the lamp up like this. This is why I don't
like, this is the primary reason why I don't like these common head screwdrivers or screws, because
the driver, when you have a Phillips screw or a Torx or whatever,
you can use the screwdriver to kind of hold the screw into alignment, but when you have one of
these common or slotted screws, it's just a wobbly freak show. Even trying to get it into the hole
here is kind of a nuisance. All right, I got it started now. Okay, now it's nice and solid. That's
the way it should be. So, now all this stuff here we have to detach. This is a really nice mounting
plate, and we'll use this when this goes in the kitchen, but we're not going to use it down here
because the ceiling is too low to get any enjoyment out of it.
Oh, this is really nice fancy chain, too. I didn't realize that until just now.
Beautiful ornate chain. That's pretty cool.
All right, we're gonna do, let's see, this. I don't think that this is the original part. I'm
leave it together because when I put it in the kitchen, that's what I want to use.
So, I'm going to open up this part here
so we can get this out of here before it breaks something,
and I'll open up one piece of this ornate chain so we can detach it and get this
away from the fixture because it's an accident waiting to happen having this
all attached here. This chain is pretty strong. It's got to be old,
and the chains you buy today are really flimsy like this chain down here.
Okay, so now I can clean this up without attaching the light. So, I think the way this works is this
screws to your electrical box, and something is improperly oriented here. Now, the way that this
is supposed to work is, okay, here's the problem. This is tied on here, and it should not be because
it's not where this belongs. This goes onto the electrical box, and then this goes up after it
like this, and then this screws on to here like this, and then this screws on like that to hold
that up. So, this is what it would look like on the ceiling. Quite nice. So, I'm going to leave
all these parts in the bag together if possible. I want to actually put this together so that it
stays. Some information in there doesn't mean anything to me, but maybe somebody recognizes
that. Okay, so that's what it should be like, and this is the ornate chain that I'm going to
put back on here and close this up, and then I think that we'll take this other piece of bland
chain off, and we'll use this to suspend the light. It should have enough for this task, and
this all we're going to put in here so we can use that in the future when this ends up in the
kitchen. Okay, so now let's see how many links of chain do we need to suspend this from the ceiling.
It's going to be about one link to the bottom of the beam, so actually all of these links
might make the right length. Hmm, it's either going to be four or five. The shape of that one's
kind of sketchy. The shape of this one's not much better. Let me close this up here, put it on,
and close it up. All right, let's see how this looks in terms of the height. Hopefully it doesn't
look stupid. I don't think it would. I think it'll look great. Now we do need to make sure that the
light, and this might be a challenge, we want the light to be like this, so we need to figure out
how to get it to stay that way because it's going to have a tendency to not be that way.
We'll probably have to spin the hook itself on the fixture just slightly to correct that.
Okay, I guess I, I guess I turned it in the wrong direction. That's unfortunate. Now I gotta take
this to the bench and correct this properly as opposed to make it worse like I just did.
So we need to make this so that it's like that because this, this is going to end up being like
this, so that should be like that. Hmm, it's still trying to move that way. All right, I think that's
good now. All right, that's pretty reasonable. I'm gonna go get some, uh, I gotta go get a hook now.
I think we should be able to start this. This is one of the potential issues of putting the,
the cord through every loop is that it gets stuck. Like it is now, that screw is in too far
to, um, that to latch. I'll just open the chain up a little bit, hook it on the,
hook it through the loop. I don't want to undo the screw at all. I want the screw in there as much
as it could be. Man, this chain is not cooperating at all. The chain is hooked. I need the cord
slack back though. There we go. Okay, I'm gonna go retrieve a hook now. Okay, so we're gonna plug
this in to, uh, this outlet here. So this will be switched with the rest of the lights. This is very
convenient. Okay, that's plugged in now, and we'll put a hook in here to hold the wire up, and this
is still kind of turning around a little bit. I have to finagle this a little bit more.
It's going to be very difficult to, to get correct because the slightest amount of tension on this
cord will cause it to move. If I just turn that upside down like that, it might fix it. Might go
too far. That's actually a little bit too far now. This is one of those things that we're probably
just not going to get perfect. I would keep fussing with it if this was a permanent or
somewhat permanent install upstairs, but for this case, I don't think it's worth fussing with it
beyond that. That looks pretty good. That's just about, just about perfect. Oh, now it's moving
again. All right, now it's totally off. That's not acceptable. That's almost as bad as it was
before we removed anything at all. All right, now why did it just go like that? I have a feeling
this is going to be a reoccurring problem. Oh, I forgot I didn't put the stinking light bulb in
there yet. Now I'm going to screw it up putting the light bulb in probably. It's indecascent.
I'm not even going to mess with it. I'm just going to leave it alone because that's pretty good.
All right, so now we've got a full array of four vintage hanging lights in here,
and they look really, really nice. This lighting and fan array came out really good in here.
Very happy with the way it turned out. Plus, we got that lamp there on the table.
Really quite nice. All right, well that completes the vintage hanging lights installation videos.
Now we're ready to move on to fixing the regular lighting circuit.
