SpaceX Starship Flight to 60,000ft - From Hop to Bellyflop

Tech Level
93 followers
8 Video Views·Dec 4, 2022
This video is sponsored by Brilliant.
Hey hey Marcus House with you here and we are counting down to the test
of the Starship prototype we've all been waiting for.
Serial number 8 which is well underway and we hope only weeks away from a flight test
just above 18 kilometers or 60,000 feet in altitude.
Mix with that the many Starship prototypes in development
and the rapid evolution of the construction and launch sites at Boca Chica
and we have a load to catch up on.
Along with that there have been some interesting updates on the human
landing system by Dynetics and some updates on Astra's launch failure from Alaska.
Over the past week the Starship SN7.1 test tank has been going through cryogenic cycles.
During these cycles the vehicle is filled with cryogenic nitrogen and then pressurized.
These cycles are intended to test the new thrust puck which is a core component for
those powerful Raptor engines to attach to as well as additional refinements in construction
including the new 304L stainless steel.
That allows SpaceX to gather that important data to determine
the maximum pressures that these new 304L vehicles can hold.
None of these initial tests were intending to be destructive as these tests were done
on the new test stand and utilized the hydraulic rams to simulate the forces of the Raptors.
For the planned destructive test on the 17th,
SN7.1 was first moved back onto the cheaper transport mount.
During the testing window that followed we saw three attempts of the expected test to failure.
After the road was closed and the pad was cleared, venting started.
However, soon after the venting stopped and workers returned to the site to inspect
and presumably repair the issue.
We were unsure what was wrong but it did appear that there was a lot of uncontrolled
venting that occurred around various ground support equipment.
This whole process happened repeatedly until the road was reopened early in the morning.
At the time of preparing this video to go live,
there is another backup window for Monday the 21st.
Hopefully during this window a test to destruction occurs
where the vehicle will essentially be pressurized to and then above
the predicted limits that it's expected to hold.
Elon Musk then confirmed that SN8's flight campaign will be next after all that action
and this is where things are really going to get exciting.
He tweeted here that Starship Serial Number 8 with flaps and a nose cone
should be done in about a week.
Of course, that was tweeted now close to a week ago
and we are now seeing some solid progress here which we'll talk about shortly.
The plan after this beast is ready to go is to conduct a static fire,
check out static fire again, and then finally that flight to 60,000 feet in altitude and back.
Converting to metric there, this is a flight to just under 18.3 kilometers in altitude.
Just a little under what we had in our minds previously.
Just to put that into some perspective for you though,
commercial aircraft cruise typically around 10 to 12 kilometers in altitude
so it will be much higher than that.
I must admit I had in my mind this whole time
that Starship would only be in freefall for a short time
but at this altitude the vessel should have quite a long time in freefall
before reaching the ground.
From the Starship landing animation shown last year,
we can get a rough idea of the fall velocity that the body will have
at least in the lower atmosphere.
Based on this, the rate of fall is going to be somewhere between 60 and 70 meters per second.
A little higher perhaps in the initial parts of the drop
as the atmosphere is not as thick.
At the flight altitude that we are talking,
there should be three or four minutes of fall time
for the test depending on the vehicle drag going on throughout the entire fall.
This gives quite a lot of time to test that those aero surfaces
are going to do what they need to do before it is time to fire up those engines.
As Elon Musk said,
one way or another excitement is certainly guaranteed with this flight.
With all this going on, especially in the early prototyping days,
support of that local community is very much appreciated.
You really need to think about the anticipation, excitement,
and at times I'm sure frustration about the interruptions that are constantly occurring
around the site that affects the local residents.
The support of everyone is super important with these groundbreaking missions.
Now just in reference to our video from last week,
the animation created by Corey here
showing the sections of Starship SN8 come together as it flies off
got a lot of excitement, Elon Musk included, so that is great to see.
So yes, during the week, SN8's assembly has continued inside the Midbay.
The first new additions were the aft fin aero covers,
which were placed on the side of the vehicle.
These covers will aerodynamically blend the fins with the vehicle's body
and can be seen here in Brendan's latest SN8 diagram.
Mary also spotted this section here that is speculated to be the fin mounting hardware.
Talking about the fins, they were delivered to the production facility
and are currently next to the Midbay as seen in RGV Aerial's images here.
Along with this, the two sections of the nose cone
are near the windbreak facility awaiting stacking.
Once those sections are mated, the forward fins will be attached to the side of the nose cone
and then the final assembly is then expected to take place
either at the launch site or at the production facility.
We are thinking that it would make more sense to roll out the tank section
and the nose cone separately to the launch site to stack it there,
but we need to wait to see what happens.
Let me know how you think this final piece of assembly will occur in the comments below.
What am I also super excited for?
Those three Raptor engines that will be attached to the thrust puck structure.
Keep in mind that as far as we know, Raptors have not been tested together like this before.
Individually, many times, but there's a big difference firing engines together
in this densely packed configuration at the same time.
You can have all sorts of crazy vibration resonance issues,
but SpaceX to date have nailed these problems at every turn.
You've only got to look at the 27 Merlin engines flying together on Falcon Heavy
to know that the experience is already there.
Such issues, of course, are likely compounded in this case,
seeing as the Raptor engine has such a huge thrust output currently
with each around 2200 kilonewtons or 225 metric tons of force.
With three of them firing at 100% thrust, that is a whopping 675 metric tons of force
pushing up on that thrust puck structure there.
Crazy stuff.
So yes, once SN8 is all ready to go and static fires and checkouts have occurred,
the big event will be on the cards.
It is not without risk, of course.
Being the first vessel to make a substantial flight with this level of complexity,
there are going to be numerous challenges.
It is very likely that this SN8 prototype will succumb to a failure.
Some of the things that have never been tested, just as a few examples,
include not only the initial lighting, but the relighting of the three Raptor engines.
Then we have the crazy flip maneuver and the belly flop controlled descent.
Elon further summed up the ambitious goals of SN8 while replying to Eric Simulation on
Twitter saying that if SN8 craters, Starship Serial Number 9 and 10 will be in development
following closely for their turn at the flight test.
That increasing production rate allows for fast iteration.
And we can certainly see that now with all of the Starship prototypes in progress.
With us watching it so very closely every day,
it is already very difficult to keep track of what is going where.
All that being said, SN8 won't fly immediately after construction.
It still needs to be prepared and tested.
We imagine that there are several weeks before that may happen.
By that time, SN9 will likely already be at a stage of construction where it will be waiting
for its own aerosurfaces another few weeks after that and it should be about ready to
be rolled to the pad.
Sections of SN9 have actually already been spotted around the facility for the last two
weeks and it's already now being stacked right next to SN8 in the mid bay there with the
middle of the liquid oxygen tank seen here, just days after the common dome was stacked on top.
SN9's aft dome stack was also recently flipped and the aft skirt was spotted.
On this skirt we can see that the legs are already deployed and seem to have some wheels
attached.
Could this be a self-rolling Starship system that Elon mentioned months ago?
Let me know what you think.
This picture here of SN5, SN6, SN8 and SN9 provides yet another great example of the
pace of construction and innovation going on here.
This is quite the unique first time view of four Starships in that same photo.
How cool is that?
Moreover, sections for SN10 and SN11 have already been spotted around the site.
Along with this, a truckload of critical flight hardware for future vehicles was also delivered
in the week including thrust pucks and legs.
As Matthew Cable here tweeted, this is nuts now and when asked what serial number Starship
Elon thinks could be the first one to reach orbit, he replied saying just a guess but
probably mid-teens.
The booster and stacking on the orbital launch pad are likely going to be the limiting factors
but SpaceX plans to build several ships to improve the production system.
Interestingly, as of right now, the fate of the already flown SN5 and SN6 Starship prototypes
are unknown but it is certainly speculated that SN5 will fly once more.
This time, however, we are thinking that it will be sporting a nose cone to test the welds
and attachment methods before risking a nose cone on SN8.
SN6 though, we really don't know.
S Padre here tweeted that it would be cool to have one of these at the entrance to South
Padre Island.
Elon replied to this comment by neither saying yes or no but instead just asking if someone
can provide a boat service from South Padre to Boca Chica.
Now, news this week has been lacking on super heavy components.
We have been trying to catch glimpses of sections on site.
They may well be out there of course hidden away and we just haven't been able to spot
them yet.
The massive high bay is now at its final height with roof sections being added while workers
add cladding to the sides of this huge beast.
We think this structure should be completed within a few more weeks.
However, super heavy stacking could well be kicking off before the completion of that
high bay construction similar to how we saw the early starships being assembled before
the mid bay was completed.
The future launch pad for the super heavy has been continuing as well.
SpaceX has now completed the construction of the supports for the structure and these
huge columns will soon be filled with concrete.
Following that, we expect to see the heavy mount to be constructed on top and hopefully
a few hints on how the flame diversion system is going to work.
A massive thank you to BocaChicaGal with NASA Spaceflight, RGV, Aerial Photography and Lampadre
for all of the amazing coverage.
Be sure to support where you can as there would be no way for us to talk about these
things if we didn't have this incredible open source of information.
Thank you all of you.
Also, I'd just like to say a big thank you to all of you watching here as well for liking
and subscribing and commenting.
That goal I had of reaching 200,000 subscribers by October, well, check that out.
Almost there and it's all because of you.
It is such a privilege to be even a tiny part of your lives and each week you remind me
why I do this.
Thank you so much for your amazing support.
Now, it has been a few weeks since I've shared some of the beautiful work by Neopork and
these new rendered animations of Starship and Super Heavy are hot off the production
line.
And when I say hot, I'm referring to the fried CPUs and GPUs being tortured here with
this incredibly intensive task of rendering what we're seeing.
We've viewed many incredible stills before already, but taking those to the next level
in animations here is amazing to see.
There are great scenes like this dropping all the time, so make sure you're following
Neopork there on Twitter.
Again, a little support from a lot of people goes a long way and helps us all to collaborate
together.
Along with that, Gameplay Review UK has smashed out these awesome simulations of Starship
SN5 and SN6 taking their flights in Kerbal Space Program.
He's also included things like the roll lift vehicles and the launch pads, so not
only do his replicas look the part and behave like the genuine article, but you can also
do things like try to replicate the pad explosion like we saw with SN5.
These are truly mind-blowing replicas, and yes, they are all made with stock parts so
anyone with Kerbal Space Program can download and enjoy them.
It is a heck of a lot of fun trying to fly this beast.
Links to all of this amazing stuff is in the description.
Now, over to some other news.
Dynetics has been tasked with designing and building a human landing system as part of
the Artemis program heading back to the moon.
Along with them, Blue Origin has its integrated lander vehicle, a full-sized mock-up of which
was recently set up in NASA's Johnson Space Center.
We have SpaceX with their moon lander version of Starship as well, and one of these designs
will ultimately go on to deliver the first woman and the next man to the lunar south
pole by 2024.
The Dynetics test article we see here is full-scale, and from the time they were chosen as a
contractor, the concept design has taken just 3 months to reach this point.
With vital feedback from experienced veteran astronauts and a dedicated team of experts,
the interior is really taking shape.
They are able to quickly reconfigure the placement of equipment models in no time if it's
determined that there are better positions for various components in the final design.
In that case, they just simply pick it up and move it.
That human feedback in this full-sized mock-up as seen here is vital to determine the amount
Experimenting in this way, especially in a spacesuit, can be very useful.
It ensures that the required space for exiting and entering the habitat in various scenarios
is all good.
The thing I really love about this entire lander is the reusability of the vast majority
of the system.
About the only thing that isn't intended to be reused is those outside fuel tanks which
are ditched prior to landing on the surface of the moon.
Once its mission is complete with its crew having been returned to lunar orbit and transferred
to the lunar gateway, it can be made available for its next mission needing only those few
replacement tanks and fuel.
Refueling, of course, is planned to be conducted in space using the propellant from Vulcan's
Centaur upper stages and eventually on the lunar surface itself which opens the door
to many exploration opportunities to other locations.
This innovation and proud history of Dynetics and its collaboration with NASA over many
years will hopefully see an on-time delivery of this very special and unique vehicle for
the next generation of lunar explorers.
Time will tell if this will be the Artemis lander and we wish all you guys at Dynetics
the very best of luck.
In last week's episode, news was just breaking about Astra's first demonstration launch
attempt with Rocket 3.1 from Alaska.
We'll talk more about that in a moment but first, our amazing sponsor Brilliant.
It's certainly fair to say that running this channel was a struggle financially until Brilliant
began supporting us here.
In 2020, they have helped to transform the channel by being our core sponsor.
That has certainly helped to take us from where we were back then to where we are here
today.
And for viewers that have been here for a long time, you know exactly what I'm talking
about.
The financial assistance has allowed more hours to be spent on the videos and we now
have a production team on board to help make the content even better.
What is even more incredible for me is that I'm supported here with a brand that creates
incredibly interesting math and science-based learning material.
Material which guides you through problem solving in an active way.
No tests and no grades.
You just jump into a topic you're interested in and start there.
I've more recently begun going through some of the material with my eldest son.
Much of it is too advanced for his age but with all of the interactive and visual components,
talking these concepts out with him is incredibly rewarding.
This new course on the concept of infinity is something that we've really enjoyed talking
about and visualizing.
We started just with basic counting, working right up to the idea of infinity and exploring
the beauty in fractals.
This stuff creates such interesting discussions that lead us to other topics.
So if you're naturally curious and you'd like to build up those problem-solving skills,
then consider checking out Brilliant.
By supporting them, you are supporting us here.
So if you'd like to give it a try, head to brilliant.org slash Marcus House.
The first 200 people will get 20% off the first year of Brilliant Premium.
The link is in the description below.
So yes, Astra's goal is to achieve orbit within the three launch attempts.
We're hoping that these attempts will result in the upper stage separation just after two
minutes into the flight.
The intent here is to prove that they can achieve orbit before progressing to commercial
payload launches.
Liftoff went planned for this flight but around 30 seconds into the flight, there was an anomaly
which resulted in the loss of the vehicle.
We now know that a software glitch in the guidance system caused a roll oscillation
as the vehicle ascended causing it to veer off course shortly after liftoff from the
Kodiak Island launch facility in Alaska.
I had a lot of questions in the comments asking why the rocket had not self-destructed.
Due to the smaller size of the launch vehicle, it's not actually necessary for an explosive
self-destruction event.
The range safety officer issued an engine shutdown command known as thrust termination
and well, we can see the end result here right?
Rocket 3.1 tumbled back to earth and exploded quite spectacularly on the ground impacting
within the confines of the safety zone of the launch complex.
The encouraging thing about all of this is that there was good data collected and Astra
are already planning a software upgrade which means a quicker turnaround for launch attempt
number 2 sooner than would be expected with Rocket 3.2 already being assembled.
Astra are planning a cheaper small satellite launch offering in direct competition with
other small satellite launch providers such as Rocket Lab.
So again, well done Astra on that attempt and we wish you all well with your next launch
hopefully before the end of 2020.
Now just quickly a huge thank you to my amazing patrons here.
There is no chance that I could continue creating content at this frequency and length without
you.
The support you all here provide allows us to increase the time that we can spend and
that is all thanks to the growing list of names that we can see right here.
Thank you to each and every one of you.
As that list continues to grow we can do even more.
And this includes of course the work done by the production team especially Brenton,
Adam and Brendan who benefit from the support and funded work as well.
As support increases that helps the whole team so if you like what we're doing here
and you'd like to join our awesome patrons head to patreon.com slash marcus house.
That gives you access to interact with me more directly via the linked roles on our
discord server.
You can have earlier access to the videos to watch online before anyone else and you
can also have your names listed right here like all of these other incredible people.
Thank you to all of you for interacting with these videos.
Every subscription, like, comment or share helps to get these videos seen by loads more
people.
Always remember that you help to drive this global passion to make all these dreams of
colonizing other worlds a reality.
A massive thank you as well to my quality control squad here for helping me research
and proof through all the material for these videos.
If you're interested in these topics and would like to be a part of this follow me
on twitter and please do get in touch.
In the tile in the bottom left today we have my video last week talking about Starlink
and its newly tested communication via space lasers, rocket labs, awesome new photon spacecraft
and a few new updates on NASA's space launch system.
In the top right is my latest video and in the bottom right content that YouTube has
selected from my channel just for you.
Thank you everyone for watching.
We'll see you all in the next video.
