Tailor This Dress Shirt With Me (NO SKILLS

Anthony Rivera
67 followers
7 Video ViewsยทDec 1, 2022
What's going on?
I'm SD, this is Stylish Dad, and it's time to sew.
We are gonna start by making a new bobbin.
This is our bobbin winder.
As you can see, yeah, there's some thread on there,
but it's not gonna last us the entire time.
So we're just gonna make a new one.
How do we do that?
You can either do one of two things.
You can either get a new bobbin,
which I don't really feel like doing.
Actually, let me go see if there is one.
Okay, I can't find one.
So what we're gonna do is we're gonna take the thread
off of this one.
Almost, almost, oh crap, oh crap.
All right, okay, so we got it.
First thing we're gonna do, as you can't see it,
there's a hole on there.
I'm gonna put it in there like it's prom night,
spin that up, and put that in there,
put it in the hole like it's prom night,
put it back on there.
Now what you do, push that to the right.
We're gonna take our gas pedal down here.
Now there's a little spot right over there
where you can actually loop this thread onto there
so that it's running across this way.
But I like to just hold it in my hand like that
so that I have more control over it.
And then I hold this part up here
so it doesn't get in the way.
Now, got some scissors.
Take that bad boy off.
It is that big.
That is a good size for your bobbin.
Take it, cut it.
And now, it's time to sew.
Almost, almost.
Next, we have to thread our machine.
So we're gonna take this.
Remember what I told you about the one, two, three, four?
We go one, go down here.
Two, loop it up.
Now that little thing is gone.
So remember what we do.
We go right on the side, right over there.
Spin it, our needle's moving.
Wait till it gets to the top.
See that right there?
Take it, you loop it through.
There's a little hook on there for it to go through.
You go down here, four.
Just like that, it's that easy.
Now we go down here and we put it right in the needle.
What I do is I take it and I lick it
and I thread it right through there.
That's what she said.
Ah, come on.
Let's try this again.
Now it's through there.
That's just extra thread.
Now what we do is we take it
and we run it right through the presser foot right here.
Run it right in between there and just pull it back.
That's it.
Now we got our bobbin.
You wanna take it, drop it right in there.
There's two little notches right here.
One right there, one right there.
What you do is you loop it right
through that first notch right there.
See how it's hooked on there?
Now what you do is there's two little notches right there.
You pull it right through that notch.
Pull it right behind the presser foot, just like that.
Got a cover for it.
Cover back on.
Time to sew.
I put it to right about there.
Now you can't see it,
but it's right in line with my first pin here.
And then I'm gonna hit this little latch over here.
Boom, presser foot down.
Now this is the easy part.
Because remember,
this is the part that elementary students can do.
You take it, start out.
Now first you wanna make sure your settings are good.
Mine are good.
Time to sew.
So what you do is start out slow, just like that.
Now what I'm gonna do,
press this lever down to make it go backwards
so I can lock my stitch in, just like that.
Now I go forward again.
I like to also make sure there's no wrinkles
in there while I do it.
And as you go along, take those bad boys on out.
Again, make sure everything is lined up and wrinkle-free
because you will sew wrinkles into this.
Now remember, I was two inches in right here, right?
This was my first pin.
My second pin is two and a half inches in.
So what I'm gonna do now
is I'm gonna angle it in just a little bit.
Somehow my shirt got caught on the camera.
I don't know.
Angle it in, keep going.
Like I've said before,
I like my shirt to be more slim fitting.
So what I like to do is I like to come up
pretty close to the armpit here.
Angle it out.
Now, if we were just doing the sides,
this is where we would stop.
We would come right up there and we would be done.
But we're actually coming up
all the way through the arm here.
Now, since we're at the end,
I'm just gonna come loop right up here.
I've done it before.
We're all come up through the collar right there.
But what happens is it ends up making my wrist
way too tight.
So I like to stop right before the cuff there.
Now we wanna lock our stitch in.
And we're done.
Lift up the presser foot.
Pull it back.
Grab your scissors.
Cut.
That's it.
Now it's time for side two.
What's nice about this side is all my fabric is over here.
My whole shirt is all over here.
This side here, this is the side that I'm sewing.
So it doesn't get all bunched up
on this side of the sewing machine.
So what I do, again, line it up.
My first pin is down here,
right in line with my presser foot.
And then I take it and you just go.
Now I'm glad this happened.
This happens sometimes.
What happened is my thread came off of the needle here.
It's all good.
We're just gonna put it back on.
Remember, you're just looping it right in the needle.
Pull it back behind the presser foot
and we're ready to go again.
Presser foot back down.
Boom, go.
Okay, so what happened twice?
That's okay.
Happens sometimes.
When that happens multiple times like that,
what I'll do is I'll just pull the thread back
just a little bit farther than I did before.
So it's got more lax.
Lock in your stitch.
Again, I like my shirts to fit
a little bit more snug in the armpits here.
So I'm gonna come right up here.
Whereas before it would be down here.
And if we were just doing the sides,
we'd be done, but we're not.
We're going all the way up through the sleeve.
I kept hearing ping, ping, ping, ping, ping.
That's when I realized
I was dropping all the pins on the ground.
Awesome.
Again, I don't like my wrist to be too tight.
So instead of coming all the way up
through the wrist like that,
I'm gonna stop right here at the cuff.
Lock in our stitch.
Cut.
And done.
You just tailored your first shirt,
but we're not done yet.
Now what I'm doing is I'm cutting off camera.
Don't feel like moving the camera,
and I'm pretty sure you know how to cut.
But one thing you wanna be aware of
is you're gonna cut about,
about a quarter of an inch to a half an inch
away from your new stitch.
Okay, so now we got it all cut.
And as you can see on the sides,
it's fraying right there.
What's gonna happen is that fabric's gonna keep pulling
and pulling and pulling,
especially when you put it in the washer and the dryer,
and it's gonna get all over your other clothes.
So what we do now to fix that
is we're gonna do what's called a zigzag stitch.
So I'm gonna change the settings on my machine here
to the C, which is a zigzag stitch.
And then I'm gonna change my stitch length to one,
and I'm gonna leave my stitch width at five.
And now we're gonna do the exact same thing we did before.
So now we lost it, but that's okay.
Take it, came off of the thread again,
pull it back down, thread it in.
And because of what we're doing,
we don't really need to worry about taking our garment out
and putting it back in like that, that's okay.
But we are gonna have to do the same thing
as if we were starting over again.
So we're gonna go forward,
and then we're gonna lock our stitch in by going backwards.
That's it, done with one side.
Snip, snip.
You just tailored your first shirt, my friend.
Now, this right here is the last step.
That extra thread, you just cut it off.
It's on both sides at the bottom of our shirt.
Snip, that's it.
Like I said, have a couple practice shirts
that you try it out on,
and then tailor all of your clothes by yourself for free.
You're welcome, thanks for watching.
Click that subscribe button.
Until next time, peace.
