Beginner Tailors Ask These Questions Like...A lot

Anthony Rivera
67 followers
4 Video Views·Dec 3, 2022
My daughter's gonna grow up and be like oh sociopaths my dad's one of those. He
likes to sew. CoolPixelGunUser123 I would like you to know that I really
appreciate all the comments and all the questions that you ask and I thought
about responding to a couple of them but then I was like well I bet if I had
never touched a sewing machine before I probably have the exact same questions
as this guy so why don't I why don't I just answer all of them for all of you
guys. You should be. I'm SD I don't like long intros let's um let's do this.
Question number one in your Marvel t-shirt tailoring vid you set your
stitch tension to three but in your stitch tension video you said that for a
t-shirt your stitch tension needs to be set at about like six or seven what's up
with that man? Well here's what's up I uh I made a mistake my bad. But in all
reality and in all seriousness your stitch tension on your machine is hands
down the most overthought and overrated setting on your machine compared to
anything else. And I get it I was that person where I thought that my stitch
tension had to be set to an exact setting every single time and if I
didn't do that then I was gonna mess up my project. But it's not like that at all
you're gonna end up learning your machine as you go along and you're gonna
kind of figure out what it can handle what it can't handle what its stitch
tension should be set to what it should not be set to and it's really it's gonna
tell you whether or not it's set properly or whether it's not set
properly. Let's say you are tailoring some clothes right now at home and you're
noticing some issues with your stitch tension like like seam puckering or
stitch puckering or skip stitches or bunch stitches things kind of along
those lines. Well that means that you probably don't have your stitch tension
set properly so kind of adjust it accordingly start sewing again see what
happens and the next thing you know boom you're you're probably good. And well
there's also the fact that on my two machines my Necci FA-16 and my brother
ST-371HD they both only have upper stitch tension settings they don't have
lower stitch tension settings. You're gonna come across some machines that do
have both and at that point you're gonna have to kind of you know configure both
of them to make them both work together simultaneously but if you just have one
up here for the upper stitch tension yeah it's it's it's all good you can you
can kind of wing it. And I'm also gonna elaborate on this part in another
question that you asked later on but the reason why I I like to talk about stitch
tension and tell you how to set it properly is because really at the end of
the day I want to make sure that I'm teaching you right I don't want to skip
steps. I remember when I started out I didn't know any of this stuff so I was
like well if you use the stitch tension like you didn't you didn't mention that
at all so is it important is it not important I would much rather have
someone teach me exactly what it is exactly how it works exactly what to set
it to and then as time goes on realize that it's not all that important versus
the opposite where they never acknowledge it at all and I'm just you
know flying through all these projects everything's going good great I
practiced on a couple of t-shirts I practiced on a big old bed sheet and I
think that I have it down and I think I've got my machine settings down and
then I decide to dive into something more expensive or something that I
really like a garment that I really like and the next thing I know I messed it up
because the tutorials that I was watching never ever elaborated on that.
So the too long didn't read version is well that's why my stitch tension was
set to that in one video and that in another video because at the end of the
day it doesn't really matter that much. I take that back it does but you get what
I'm saying you're gonna learn your machine. Oh I like this question a lot I
can't get actual sewing pins at the moment will will normal pins work like
not ones that I'm putting in the wall but just any kind of ordinary run-of-the-
will those work? Yes absolutely you can use normal pins if you want to because
yo I used sidewalk chalk in the beginning for the longest time I stole
my daughter's sidewalk chalk she must have been she was like two or three and
when I started tailoring I would just take the big old box of sidewalk chalk
and I would try and choose the colors that were lighter the ones that I wasn't
really worried about staining my clothes so I would choose like the white chalk
or the green chalk or the light red chalk and I would just draw a line on my
garment and I would just sew right along there. And in a lot of ways using
chalk is well it's a lot easier than using pins because you don't have to
remove anything as you go along. Now the downside to using something like chalk
or using anything to just kind of put a mark on your garment and use that as a
guide as you sew along is your two pieces the let's say you're sewing a
t-shirt you've got the front of your t-shirt here you've got the back of it
or the bottom of it well there's nothing that's holding them together so they can
slide around like that so you're gonna end up having your seam or your line
right on top there but if they're sliding around on each other one moment
it's right here well that kind of slid so now you're your new stitch or your
new seam it's it's over here. Oh I thought my audio wasn't recording for a
second. If you are new I made a video on how you can slim all of your hoodies at
home which you can check out in the card and everybody in the comments was like
yo man why didn't you just use safety pins can you use safety pins yeah you
can absolutely use safety pins like we've already already kind of been
getting at you can use any kind of pin that you want to but the downside to
using something like a safety pin is it will hold its place you can use it as a
marker on your garment whatever it is you're tailoring but the problem with a
safety pin is it's you're gonna end up kind of fiddling with it to get it in
and out of your garment as you're sewing along so you're gonna end up going with
your sewing machine just sewing and then you gotta stop you gotta take the pin
out fiddle with it and then you keep going and then you stop and you fiddle
with the next pin and take it out it's just really cumbersome it's really
labor-intensive yes in a pinch you can do it they will work but yeah I wouldn't
I would just if that's all you got sure but otherwise mm-hmm oh this is a good
one I like this question a lot SD I could only find 90-14 sewing needles
they didn't have 80-12 is that okay can I tailor things like t-shirts and dress
shirts things like you know joggers fleece flannel things like that along
those lines well let's dial it back a little bit here I made an entire video
on sewing machine needles already but the too-long-didn't-read version is this
the needles that you bought are made for thicker materials made for things like
denim leather canvas things along those lines anything with a 90 at the
beginning of it means that the the what's the the radius or the
circumference of the needle is really wide versus 80 it's not as wide so it's
gonna be able to penetrate your garment really really well and that's all good
and fine and they kind of sort of are interchangeable you can use a thicker
needle on thinner materials like a t-shirt but here is the problem that
you're gonna end up running into the problem you're gonna run into is that
since the needle is going to be bigger on a thicker needle that 90-14 needle
you have it's gonna leave a bigger hole and you might not think that that's a
very big deal it's not gonna sound like it's a very big deal but I've done that
before where I have tailored a oh man I think it was my joggers video I think I
used a denim needle in that video we've tailored joggers on this channel before
and you're not gonna notice it up close if you're just kind of normally looking
at it but if you were to hold the joggers up to the light you're gonna see
all those little individual holes just kind of shining through like oh that's
kind of weird and it's not the end of the world but like you're gonna know
that it's there you're gonna notice it and it's gonna kind of sort of drive you
crazy but I get it everything is out of stock right now and it's so annoying
next question how do I know how much my denim weighs I don't have a super
precise scale or anything I remember you mentioning in one of your videos that
that you need to know how much denim weighs what's that mean yes but actually
no well it's kind of sort of like that and the reason for that is because you
don't necessarily need to know exactly how much your denim weighs and by that I
mean you don't need to know if it's 12 ounces versus 16 ounces there's gonna be
some wiggle room there's obviously gonna be a gray area and it kind of
elaborating on that a little bit all denim is kind of sort of created equal
and by that I mean it just kind of comes down to what's in style what's trendy
right now what's in style and what's trendy is really kind of lightweight
thinner denim so if you go to Target or really kind of anywhere that sells jeans
right now their denim it's not super thick they don't sell heavy-duty denim
unless you specifically look for it there's a couple of brands out there
that you know they're more so like work pants like work style type of denim but
that like you'll know you'll pick it up and you'll be like oh this is super
thick and I guess to kind of make it a little bit easier for you imagine taking
a pair of chinos and then taking a pair of jeans and you're holding them both in
your hands notice how they kind of feel the same like they're not they don't
like the depth the denim jeans don't necessarily weigh a whole lot more than
the chinos do well there's your answer right there yeah you can just you don't
need to worry about you don't need to know how much it weighs don't worry I
like you you listen to everything that I say and like my daughter does now like I
was saying earlier the reason why I like to kind of elaborate on things on this
channel and really kind of dive deep and get into kind of the nitty-gritty and
real in-depth is because I don't want to skip anything like I said I remember
when I started and I felt like people skipped over a lot of things you can't
necessarily assume that everybody knows what it is that you're talking about you
can't assume that everybody automatically knows that the weight of
your denim really isn't that big of a deal it is a big deal which you will
figure out as time goes along but if you're just getting started you want to
dive into it you don't know that so how nice is it to just have someone tell you
that in a video and say hey your denim weighs this much right here maybe use
this needle if your denim weighs let's say between 14 ounces to 24 ounces yeah
you can use a denim needle but anywhere from 8 to 14 ounces it's okay like this
one why does my thread color matter on my stitch if nobody's gonna see the
stitch oh man I love that question the reason why I love that question is
because you saw that video you oh yeah you saw that video where I showed you
that janky red shirt that I've got that's got black it's got black thread
on the inside of it to answer your question no dude it totally does not
matter but again piggybacking off of what I already said like I want to make
sure that I teach you the right way but I still do that I still kind of mix and
match what it is that I'm sewing if I'm making an actual tutorial I'm gonna
match up the color of my thread to my garment because well it's just the kind
of it's the professional thing to do but if I'm going on a binge myself and it's
it's hot it's summertime right now I just went on a straight-up binge on a
whole bunch of t-shirts did I care about switching up the thread in between
projects between the white shirt the gray shirt the black shirt the red blue
no I didn't at all in fact now that I think about it I don't I think every
single one of those shirts that I tailored has black thread in it so
really it comes down to personal preference because at the end of the day
yeah nobody's gonna notice it but you are and just kind of do it the right way
the first time develop those good steps and those good habits the first time
around because next thing you know you're gonna look in your closet and
you're gonna see like a white t-shirt with black thread in it and then a green
t-shirt with red thread in it it's gonna just it doesn't just don't don't be me I
hope I answered your questions thoroughly for you men and again seriously
I really appreciate all those questions you're asking and if you guys have any
more you want to leave down in the comments be sure to let me know that's
all I got for you SD out, deuces!
