How To Tailor Workout Pants Into SLIM Fit Joggers

Anthony Rivera
67 followers
2 Video Views·Dec 1, 2022
I am a huge fan of sleek well tapered workout joggers, but uh you know what I'm not a fan of?
Spending like 40 bucks on them. So because of that if you want some workout pants at a decent price
you are gonna get this dumpster fire. No bueno. I'm SD and we ain't got time for that let's sew.
Let's start by flipping these bad boys inside out so that we can measure and pin them. Wait what?
Yeah I'm gonna measure them and I'm gonna pin them inside out because it's a lot easier to do
it that way and it still gives you a really good idea of what the finished product is gonna look
like. These pants, these pants are just hideous. Honestly whose idea was this? Whose idea was this
to make these pants like this? I want names! And the worst parts, oh the worst part about these
pants is that ridiculous rise. The rise is gonna be that distance that's between your waist and
your crotch. And on these pants it's wider than the Nile River. Seriously look at it, it looks like
I am wearing a diaper. Let's uh let's let's change up that whole depends look we got going on. Now
these pants are 31 inches from the crop seam all the way down to the cuff, which is just another
way of saying the end of the pants. What we did is we put a pin that's an inch from that crotch seam
and then another one four inches down. And then we put a pin every four inches until we get to the
bottom. But wait wait wait wait wait SD slow down. How do I how do I know where to put the pins?
How do I know how much I'm supposed to measure? And do I measure from the seam or do I measure
from the end of the pants? Like I I dude I don't get it. Well as far as measuring goes you can kind
of sort of do either or. You can measure from the seam or you can measure from the edge of the
garment. But you just want to make sure that you're consistent and you want to be aware that if you
measure from the end of the garment that seam is actually going to add like a quarter of an inch.
So heads up if you think it's an inch and a half it's actually more like an inch and three quarters.
Yes math said like no one ever. And this is the part where you just get creative with it. Test
out different widths and see how you feel about them. See how it looks. Start with taking an inch
off and just kind of work your way up from there. Or even work your way down from there. Once you
start doing this for more pairs of pants you're going to kind of sort of develop a baseline as
to what you like to take off of your pants. But since you have never done this before here's what
I did. I've got these pants pinned from the waist down to the knee at an inch and a half and then
from the knee all the way down to the cuff it comes into two inches which is really going to
give me a nice taper. After you pin them up try them on and see how they feel. Is it too tight?
Well just move the pins out by about a quarter of an inch to a half an inch. They're too loose? Then
just go the opposite way in those same increments. Keep watching till we get to the sewing part
because I messed up bad! When you were done measuring and pinning and trying them on and
spinning in circles on stools like I usually do, make sure they look exactly like this. All that
fabric will be on the left side well out of the way of our sewing machine so that it doesn't get
all bunched up under there. And we can just feed our pants through that machine like a hungry hungry
fabric monster! Oh and I wonder why I have no friends. We are going through the whole thing in
one shot. One line all the way from the cuff through the crotch on down to the other cuff.
Don't worry it's easy. And if you've sewed a shirt before you got this butts!
Hang on there's there's kind of a big difference. We for the first time ever are going to be using
the safety stitch. Bloop! Now it's very similar to a straight stitch. A straight stitch is going to be
going forward indefinitely, whereas a safety stitch is going to go forward twice and back once.
Forward, forward, back. Forward, forward, back. Oh whoa whoa whoa no no no no no. I don't want to get
too close with that song. I'll probably get demonetized. And because of that stitch going
backwards once it creates an incredibly strong stitch. And yo I got a squat butt so I need all
the protection down there that I could get. And look at that we are at that crotch seam but we're
just gonna keep going straight through. No stopping at all. And now what we did is we just gave our
pants a lower rise. We got rid of that diaper butt. Man the things that I thought that I would
never say. Oh wait for it. Wait for it. Here it comes. Boom! I lost it. My thread it got all frayed and
then it broke. Just like that I was almost done and I lost my top stitch. Oh and uh that that
actually happened three times. But really I'm kind of glad that it happened because it might happen
to you too. And if it does just don't panic it's not a big deal. All you got to do is cut off that
bottom stitch from your bobbin, set everything back up, line your pants up where that seam left off or
were broke, and then just keep going. You are done, cut it up, throw a nice zigzag stitch on there so
it doesn't get frayed, and you've got yourself some $40 joggers for $16. Off to Target you go!
SD out, deuces!
