How to tie a tie: step by step, simple and easy to do Think of the Half Windsor knot as your Monday to Friday go-to. This classic triangular knot perfectly pairs with a semi-spread collar. It’s also a smart choice for taller, lankier men since the knot requires a little less fabric, allowing your tie to hang longer. Tie a tie doesn’t have to be hard. Learn how to tie a Windsor Knot in 6 simple steps:
1. Place the tie around the neck. Make sure the wide end is about 1/3 longer than the narrow end. (1:05) 2. Cross the wide end over the narrow end and back around from behind.(1:25) 3. Lift the wide end up and feed it down through the neck loop. (1:37) 4. Pull the wide end to the right so that it's inside out. (1:48) 5. Cross the wide end over to the other side and up through the neck loop.(1:55) 6. Feed down through the loop you've just created in the front. To tighten, pull down on the wide end and slide the knot up with your other hand. (2:15)
Thanks for watching and I hope that now you have a perfect knot. Follow our channel on Gan Jing World to never miss a new video.
Now I've taught almost a million people on the internet how to tie a tie, but apparently
some of you still cannot grasp it.
So today I'm going to use this bad boy, my mirror, and we're going to make it as simple
as possible to learn the half windsor knot.
All you're going to need to do is to put your phone next to the mirror and just copy me
exactly.
And seriously, if you can't do that, maybe you should just get one on a rubber band or
something because seriously, it's probably not worth trying anymore.
Okay guys, let's get straight on with it.
You're probably late for a wedding or court, maybe.
So let's do it.
By the way, let me know in the comments where you're watching this video from because these
are going all over the world and it's really interesting for me to know how far they're
being spread.
So let's do it.
Okay so this image is now mirrored.
All you're going to have to do is copy exactly as I do.
The thin end of the tie known as the tail, you're going to need that quite short.
The thick end of the tie known as the blade, you're going to have that quite long.
Now this will vary from tie to tie and neck and body size so you will just need to work
out after a few goes how long you need each side.
But you cross the thick end over the thin, squeeze the middle just to keep it together
and bring the thick end round the back of that knot.
Then we're going to tuck this blade through the middle, that loop through the middle.
Give it a little tug and your tie should be hanging directly behind and back to front.
Then we're going to cross it to the opposite direction, bring it over the front and that
is going to produce that little, the front of your knot and then we're literally just
going to tuck the thick end of the blade from behind through the loop and tuck it through
that, just the front of that little knot and then the trick to making a good knot is to
give the blade a little pull then squeeze the bottom of this knot to start getting a
nice triangular shape and I would not just pull it straight up, I would always be squeezing
that knot so you get a really nice shape, pull your collar down and there we are guys,
we're all done.
The Half Windsor Knot should be pretty simple.
Okay so that is it, please tell me you managed it.
If you managed it, leave the video a like, tell us in the comments below so we can know
that we're helping people, if you didn't manage it, what's wrong with you?
Anyway, thanks for watching guys, why not follow our vlog, I run a menswear business
here in the UK and you can see behind the scenes of how you grow a fashion business
from scratch, might be something you're interested in, might not be, doesn't really matter.
Either way, why not sub to our channel and we will see you next time, cheers guys.