Audi S3 8P - Painting My Skuttle Panel

MotoAdventuresYT
21 followers
13 Video Views·Dec 30, 2020
Instagram - MotoAdventuresYT
Facebook - MotoAdventuresYT
Twitter - YT_Motor
YouTube - MotoAdventuresYT
Thank you for watching! make sure to subscribe for more videos on this!
Comment down below and let me know what you think about this video as well as what you want to see in the future!
https://www.patreon.com/MotoAdventureYT
https://www.instagram.com/motoadventure
https://www.facebook.com/MotoAdventure
https://twitter.com/yt_motor
How's it going guys and welcome to a new video. This one's just another spraying video just
touching up little bits and bobs on the S3 so I'm gonna go ahead and jump into it.
So I'm gonna make it quick and super easy for you guys to understand. This scuttle panel,
I think it's cool with the wipers and everything is super faded and just needs a bit of love and
obviously luckily we have the obviously the old S3's scuttle panel here so I'm gonna go ahead,
I'm gonna wipe all this one down, give it a good clean, give it a nice bit of paint and then we can
go ahead and just swap it straight over and hopefully it will look 10 times better. And
yeah just quick you guys if any of you guys are new go ahead click the subscribe button because
I've got loads of videos lined up while I'm off work and hopefully during the future when I'm
still on work I'm just trying to find videos to make. I've literally just done a service on that
S3 as well which is just like an oil filter, oil and filter plus some new spacers on it and stuff
but yeah I'm gonna go ahead and start cleaning this down and then I'll come back to you guys.
Okay guys so I've got the car out of the garage now to prevent it from any over spray.
I'm gonna go ahead and use the heat gun just warm up the panel itself and I've got the can over here
which I'm trying to heat up with the heater up here and then once that's all heated up we're
gonna head and put the first layer on it and I've got quite high hopes for this so we'll see how we go.
Okay guys so here we go for the first layer I've warmed up the can warmed up the panel
I'm gonna go ahead and start from this side and go to that side even if it does not turn out as I
would want it's not going to end well because it's not my only my only panel. Okay guys so so far so good
it's the first coat I'm gonna go ahead and go over it with the heat gun and just make sure everything
is nice and warm and hopefully dries quite fast. Obviously it is still raining outside still
absolutely horrible good old UK weather but luckily we can do this in here and not have to worry.
Already after just one go with the heat gun gone over the whole thing and it's already looking
really nice I'm actually pretty happy with it especially once we get a couple more layers on it
it's gonna look a lot better but I'm keen to get the old one off and actually compare
what this one looks like compared to the old one because the old one is
completely different level to how nice this one looking at the minute.
Okay I'm gonna go ahead and get a couple more layers on and then I'll get back to you guys.
Okay guys so I've gone ahead and put a few more coats on it now
and I've actually run out of paint so it's always great and I've been heating it with the heat gun
and this and that but I can't say I don't notice it is a bit blotchy I don't know if you guys can
see on camera sort of like this is dry and that's how it looks like. Obviously it's difficult because
the surface of it is not just flat it's like sort of rough surface so but it doesn't look terrible
I'm gonna go ahead and probably just try and dry it and as much as possible and I'll probably end
up just putting it on anyway see how it's like on the car. I don't have any other black paint
I've got lacquer but I don't want to put that on because my luck it'll start reacting and just
destroy the whole thing and then caliper paint wheel primer no no do not have any more gloss
black paint it's that's it there it's empty so I'll go ahead try and dry it as much as possible
then I'm going to get the car in drive it inwards take the escarpment off and then hopefully get
this on without scratching it too badly so yeah I'll get back to you guys when I start installing
it. Okay guys so I'm going to go ahead and start taking the scuttle panel off if you guys are doing
the same basically you want to take the bow front wipers off and then literally it's just pulling
off the seal and this go ahead and lifts up there you go so you so yeah pull the seal off pull this
up that'll come up as long as you got the wipers off and it's literally just clipped into the
windscreen and then it should just lift off put the wipers back on it's very simple really but
it's just a bit tedious because sometimes you it's hard to get it in here but hopefully this
one shouldn't be too bad. Okay so I've gone ahead got the wipers off it's just two 30mm nuts
that go on there and little caps that are on top of the nuts now literally all you want to do is
just pull pull this seal off super easy really I'll just leave that there for now that's that
and then literally you just have to work at it and pull so all this up here is clipped in
so you just need to pull gently and then try and get a hand it's quite hard one-handed but
it will come off just needs a bit two hands and then these are plugged in as well.
Okay so I've got it off now as you can see it's a bit muddy down here so
use this time to get the vacuum out and just hoover up all this
---- and wipe down and maybe grease up your nuts and whatever you want to do
just to make it look a bit nicer under here and it's done properly
and then I'll go ahead and get that on.
Right so I've gone ahead I've cleaned underneath and I thought I'd show you guys how to
get the actual windscreen washer jets into the panel so you just gotta put it on top
and it should there you go just clips in super super easy so now it's just literally
trying to get the panel back together and you gotta clip these clips back here have to go
line up with the windscreen lower piece of windscreen so it's a bit of a tricky one but
hopefully it shouldn't be too too bad I'll go ahead and get back when I've got it somewhat in
there. Okay so basically the tongue part of the panel has snapped on the old one you can see it's
non-existent and you can see on the new one has still has all the clip ready to be clipped in
and obviously this is all snapped and it's been stuck inside the actual where it's been a
group like clip into so we'll just have to use some prying tools and dig it all out this is
prime example so make sure that when you take it out just try and be a bit more careful with it
don't snap and stick stuff in there but luckily the new one has still got all of it so I'll go
I'll go ahead and come back to you guys. Okay so finally on you just need a little bit
of brute force on that clip and just try and wedge it inside the windscreen and once I said you can
go ahead and get the wipers on and then once they're on you're basically sorted but already
it's looking a lot better unfortunately it does look a bit patchy but obviously we'll see what
it's like in daylight and not just be one big spotlight on it. Okay so I've gone ahead I've got
it back on it's all clipped in which is absolute nightmare I'm never gonna take these things out
again because getting them clipped inside the windscreen is absolutely nightmare and you can
still see maybe if you guys can see it's still not completely in over there it's just an absolute
nightmare you just completely just force it down and then you're just scared about breaking the
windscreen or anything like that. Got the wipers back on it looks a lot better to original
just like these look faded now and the rest doesn't but oh well at least it's um
half it's done now anyway. I hope you guys enjoyed this video make sure to like
comment and subscribe. Tomorrow I've got my new rear lights so they're gonna be in a post
I'm gonna collect them tomorrow morning I'm gonna have to do a video on them as well just in case
you guys have the same situation where you have the pre-facelift lights that aren't as good as the
the nicer ones let's say and I'll go ahead and do a video of that tomorrow.
Yeah I hope you guys enjoyed this video and I'll go ahead and see you guys in the next one.
