657. Pulling a Handle for the Teapot or Mug with Hsin-Chuen Lin

Hsinchuen Lin
205 followers
May 15, 2022
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my throwing videos, please visit my channel:
http://www.youtube.com/user/hsinchuen/videos
To learn more about my back ground, please visit my Website:
www.mypots.net
Follow me on Instagram: hsinchuenlin
Like me on Facebook page: Hsin-Chuen Lin Ceramics
I usually pull my handle first and then I put it aside while I'm trimming. So in the meantime
the handle is drying. Okay so first you roll a coil. The more even the better. The more even
the better. And then you want to make it flat. I usually have one side a little bit thicker than
the other side. So when I pull that the handle is kind of tapered. So you can get to choose
when you are ready to assemble your handle. Get to choose the section that is more fitting the
size of the body of your teapot. Okay so that's the main reason why I am when I'm making my handle
like tapered. Okay and then for pouring handle so form your finger like this. Okay so like this
and then you pull down this way. Pull down and since this part here is one size a little bit
slightly thinner than the other side. So you want to when you pour a handle you want to alternate.
Something like that. Okay and you want to pour all the way down. You don't want to stop in the
middle. If you start in the middle the bottom is going bigger. Eventually you are going to break
it. So you pour it down all the way toward the bottom. Okay let me show you how to do that.
And also you want to have a lot of lubrication. So constantly add water to your hands to lubricate
okay. So when you pour it's a lot more smoother. Make it wet and pour it all the way down
toward the bottom. Kind of switch side and do that and make sure that your clay
it's a fresh clay. Okay you don't use the recycled clay. This recycled clay
when you bend you might have a crack. Okay so use the fresh clay it's much better for your handle.
Well yeah a little bit by a little bit. So you could feel it and then when you pour down
apply more pressure. So you're going to make it smoother and make it thinner.
It is a little bit thicker right before I started but when I'm going down
we're going to apply pressure depending on what thickness you like. Okay if you want to make it
thinner more pressure. Okay more pressure. See that there's one stroke you don't want to go like
slowly. Slowly it's hard to find the pressure even. So go one stroke fast. Okay fast uh-huh yeah
pull a little bit down. Yeah so that's the handle and usually I like to put a little bit of a
finger mark there. So I use my thumb to put some indentation and I prefer my center point a little
bit thicker than the outer point. So both thinner on the edge but middle part a little bit thicker.
So this is what I do. Put the finger behind it and then use my thumb and pull it down. Okay let me
come this way so you can see it. Put it behind and right hand right this is my right hand side
and just use my thumb to go down and then put the hand behind it and I'm going to push
use my thumb to push the left hand side. So this yeah yeah so so the edge is a little bit thinner
versus the center point. That's my personal preference. Okay my personal preference.
Some people do like the middle thinner the outer part a little bit thicker. It's it's up to you.
Okay so this push on and this on and smooth it out and I will do the final push final push. Okay so
see that this section is probably good to fit the body of my teapot and you can just break
the ones that you don't need it and then you want to hang it on the side of the wheel or
somewhere that nobody's going to bump it. Okay just hang in there and usually I'm hanging it
upside down. Okay so this part is going to be the top portion so I'm hanging upside down like that.
Okay the reason I'm doing that is that the top portion dries faster so when you bend it
if the the part is too dry you might have a crack so I put the top upside down so
when you bend it you don't get a crack. Sometimes you over dried it. Okay the timing is very
important when you're attaching the handles. Okay but I don't think it's going to dry within one
hour. Yeah summer time maybe like 20-30 minutes it's right but winter time it's not that fast. Okay
