FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
We just made these four full wall decor pieces using our Glowforge and our DTF printer,
and we'll show you how we did it right now. What is up? Welcome back. Do you like to do
it, build it, or make it? So do we. And we have a new video each week. This week,
we're making some alphabet soup. A little DTF on MDF, PDQ, 123, ABC. That's a mouthful.
All of that is correct. Although it didn't sound like that was nothing but a word jumbo. But yes,
we're doing some home decor items this week. So normally we do our front porch,
front porch welcome signs, and door rounds. But this week we're going to do some home decor signs,
and we're going to bring them inside. And we're just going to use our DTF printer, and then
we're going to use our Glowforge. And I'm really excited about this project. I think they're going
to be really cute. And then I'm sure I'm going to want some for Christmas and spring. Oh yeah,
I have so many ideas. That's the whole reason I bought the printer. Yes, it is why we brought
the printer. Yes. Step one, we're going to gather all of our supplies. We needed some quarter inch
MDF. People always ask us, what kind of MDF do you use? We use the light stuff. The dark stuff
seems to be a little more dense. It's harder to cut through, and it's a lot more smoky. Yeah,
and sometimes you can only find the dark stuff. But keep your eye out for the light colored MDF.
This is a great example to show you guys. It's like gold. And then of course we need our DTF film
for our direct to film transfers. We also needed some Starbomb thick super glue and some accelerator.
So we have to work fast. And of course we need our paints. Step two, we're going to cut our box.
We're going to take that quarter inch MDF over to the Glowforge and cut it out. But first we're
going to stop by makercase.com. This is where we go to make all of our frames and boxes. We're
going to make a 10 inch by 10 inch by one and a quarter inch deep box. We're going to export it
as an SVG, import it right into our Glowforge app. Before we cut our board, we're going to paint
and mask our board. We're going to go ahead and paint our board white because it's easier to paint
black over white. We're going to mask it. We're going to cut and score some lines, and we'll be
able to remove only the tape we want with the black areas. And then we'll be able to paint over
that. We'll show you how that looks in a moment. And to make our cuts in the Glowforge, I'm going
use the thick draft board settings. Step three, we're going to make our prints. Kit put together
our image in Illustrator, and then I exported the background as a PNG for the printer. I separated
the words and accents out and exported those as an SVG for the Glowforge. Our settings in
our RIP software, we use 65% color, 200% white. And then for our white settings, we used 100%
white behind every pixel. And remember, you'll want to print these with your image mirrored,
because you're going to add blue on the back, flip it over, and adhere it to the board.
We're going to press our prints. Now that our images are all shaked and baked,
we're going to slap it up, flip it, and press it down. We're going to press each one of them
for 10 seconds at 300 degrees. 10 seconds is such a small number, it throws me every time.
Oh, look how smoothly that peels. Step five, now we make our accents. We're going to take the
quarter inch MDF back over to the Glowforge one more time, and we're going to cut out
our words and accents that we exported as an SVG. And then we're going to take our DTF backers,
put them back in the Glowforge, and we're going to add score marks so we know where these words
and accents go on our backers. We're going to use the board that we cut it out of earlier.
We're going to put the board in there, this way we know it's straight, and we're going to use the
cardboard score settings. I just want to score it lightly. This way we'll have perfect letter
placement when we go to put the letters down. Step six, now we paint. We're going to paint our
sides, accents, and words, not using this brush though, it's too big. Remember we talked about
the masking on the sides, so we've got a cool little lattice pattern here that we're going to
paint over. So we're going to remove the masking for the sections that I want painted black.
We'll leave the masking on the areas that we want to remain white. We'll paint it and then peel the
thing up, revealing our lattice pattern. Kim got a little crazy and a little daring. She left all of
the words in the frame that we used to cut out the words, and she's trying to use a roller to get in
there. She's living dangerously. No, I'm just a skilled painter. The trick with painting inside
the frames is you want to make sure you keep tape on the back so that the words stay level with the
top of the frame. The harder you have to press the roller, the more likely you're going to get
paint oozing into the sides. You want to keep a fairly dry roller, and you want to keep the cut
pieces level with the frame piece. Step seven, time to assemble it. We're going to use that star bond
thick and the accelerator to glue together the sides. Then we're going to add the top, then we'll
glue on all of the words and the accents to make it pop. And now for this MDF, when you add the
accelerator, it'll look like it's drying before he ever gets to place the piece down on the frame.
But don't worry, it still works, and it's going to hold that frame right where you set it. You get
about two seconds of working time, but after that, it's good to go. You can pick it up and move it
and not have to wait for that glue to dry for 30 seconds to a minute. And two seconds is no lie.
One of them was slightly wonky, and I tried to pound it into place. No lie.
All right, what do you think? Pretty easy, huh? Looking pretty cool. I think my favorite one is
the flowers, or the leaves. The leaves, yes. My favorite is the argyle pattern here with the
little glasses and the bow tie. So hipster looking. I think it's very cute. And I think that pattern
down the side really set it off. I mean, bam, bam. I don't know. We're thinking about offering
these at the farmer's market, but we're also thinking about offering these as a kit. Yeah.
Now I'm thinking that I DTF it before it goes out in the kit. No, no. I think that we can send the
DTF transfer so that you can try DTFing and see. DTFing is now a verb. You can try and add your
transfer yourself so you can see how this DTF works. These things are great. That's my favorite
part. My favorite part is that it's like 10 seconds, instant gratification. I peel it off.
It's looking cool. Yeah, still. Yeah. I don't want to share that with anybody.
All right. Big thanks to all of our patrons. We love you guys. I'll put this file up for you guys
here in a couple of minutes. But I really enjoy talking to you guys. I love using you guys as
testers for my files. Like the other day, I sent some files out that I hadn't tested yet, but
I was hoping that you guys might. And you did. And you gave me a lot of feedback and I enjoy that.
I love that. I fixed it up, made the file way better. Well, we're out of time. So if you're
not going to join us for the patron after show, we will see you next week. We'll do it, build it,
and make it again. Oh, and join us on Tuesdays when we do test cut Tuesdays. This is where I
don't use the patrons as a guinea pig. I am my own guinea pig. And Tuesdays, that's our fun,
interactive time. So if you have questions or I don't know, just want to come chat with us,
yeah, come see what's up. Tell us what the temperature is in your area. I love hearing that.