💥💥Get Thousands of Cut Files, Fonts, Printable Guides, and more - https://makersgonnalearn.com/join . Use code “YOUTUBE” at checkout for your special discount!💥💥
Colored etching? We love etching but felt a bit limited by not being able to add colored etching to our designs. Well, with this craft technique, we can! This video will also show you our step-by-step tutorial for using colored etching with your Cricut designs. This is a must-watch if you love the look of etched glass on your Cricut craft projects. Cricut beginners, you will love how easy this is!
Some of the links provided are affiliate links. Makers Gonna Learn is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program. As an Amazon Associate, we earn from qualifying purchases. This means, at no additional cost to you, we will earn a commission if you click through and make a purchase.
Hello everyone.
Welcome back to the Makers Gonna Learn YouTube channel.
My name is Lauren and I am a craft producer
here at Makers Gonna Learn.
In today's video, we are going to be teaching you
all about how to etch on glass,
but not only that, I'm going to show you
how to add color to your etched glass
so that you have a really beautiful effect.
If you are new to our channel,
make sure that you like this video,
subscribe and hit that bell notification
so that you can be notified every time
we come to you with a great craft.
Now we're just gonna hop overhead
and I'm gonna show you all the materials
that you're gonna need to get started
with this amazing craft.
Now that we're overhead, you can see
that the supplies for this craft are pretty minimal
and maybe things that you just have laying around.
The main component for this is going to be your armor etch.
You're going to have to have armor etch
or some type of etching cream to etch on your glass.
Now there are other types of etching cream.
We just really, really like armor etch.
This is our favorite.
So this is the one that we recommend using.
Obviously you're gonna need your blank.
We actually got this from the Dollar Tree.
You can find some really great blanks
for glass etching at the Dollar Tree.
The other one we had came from Hobby Lobby
before we found this one at Dollar Tree.
So I would definitely check out your local Dollar Tree first
to if you haven't etched on glass
to try your etching on glass first
before you buy something more expensive.
For the color that we're gonna be adding,
we're gonna be using Rub & Buff.
Now, one thing I wanna say is we've tried
multiple different ways to add color to your glass.
And hands down, Rub & Buff was our favorite.
We tried different brands of the same
like wax metallic finish that did not really go as smooth,
go on as smooth as the Rub & Buff.
So I highly suggest using Rub & Buff to add color.
Now, you don't have to use gold.
They have Rub & Buff in multiple colors.
We're just using gold for this specific craft.
Next, you are going to need gloves.
This is to keep yourself safe.
Obviously, Armor Etch is a chemical,
so you will need to wear protective gloves.
We have a paintbrush to put the etching cream on with.
And for our stencil, we're just using scrap vinyl.
This is not something that you have to have
a special stencil vinyl for.
Just use scrap pieces of your permanent vinyl
that you have laying around
so that you are not wasting anything.
And finally, you are going to need a measuring tape.
Now, this is going to come in very handy
when it comes to measuring the surface
that you are going to be working on.
So this is very important that you have
some type of measuring tape or tool to measure with.
Now that we've gone over all of our materials,
we're gonna hop over into Design Space,
and I'm going to show you how you can take a file
from Makers Gonna Learn,
upload it into Cricut Design Space,
and cut it as a stencil for this project.
Now that we're here, before we jump into Design Space,
we're actually gonna start on our website.
If you are new to Makers Gonna Learn or to our channel,
what we are is we are a membership-based crafting community
where we bring you inspiration, education,
and motivation to get that Cricut
and use it to its full potential.
So we're gonna start in our cut file section.
Now, we actually release thousands of cut files
every month new, so we have a very extensive library
for you to check out.
We're actually gonna be making
a little Christmas-themed glass etching project,
so I know what file I'm going to use.
So I'm just gonna type that in.
If you don't know, you can really go through
and view all of our files.
We have them separated out in different sections,
but all I'm going to do, I'm going to type in,
oh, come let us, and that should bring up the file
that we're going to be using today.
Now that I've found the file that I'm going to use,
I'm going to click on it.
Now, you don't have to open it up,
but if you want to to really see all of the details,
you can.
So how to download this file?
We're going to go here to the cloud icon
that has the arrow pointing down.
We're going to click that.
It's going to download as a zip file.
We are going to open it up.
Now we're going to go over to Cricut Design Space.
We are going to upload,
and then we're going to click Upload Image.
From here, you can drag and drop if you would like to.
If not, you can go to Browse,
and then I'm just gonna go to Downloads,
and it will pop up with the most recent downloads you have,
and I want this as an SVG.
Now, the difference between an SVG and a PNG,
a PNG is the picture graphic,
so it's gonna be more like your print than cut image.
An SVG is a vector graphic,
so we want to open that up
because that's going to be your cut graphic.
We are going to click Upload,
and then from there, I'm going to add this to my canvas.
Now, we're not really gonna be doing a lot of slicing,
welding, really manipulating this file.
I like it as it is, so now what I want to do,
we're going to go overhead,
and I want to take my blank
or whatever area that I'm working on,
and I want to measure to see how wide
and how tall we can have this file.
So we're looking at closer to about 3 1⁄4,
maybe even three inches.
By about four is how tall this is,
so we're gonna come back over here to Design Space,
and I really want to make sure this width stays correct,
so we're going to make sure that our image is locked.
Some images upload automatically locked,
some of them upload and they are unlocked,
so if you leave it unlocked and you type in your width,
then it's going to really mess up.
It's going to really mess up this file,
so make sure that that stays locked,
and then I'm going to do three inches on the width,
and then Enter, and it will automatically size this
to where we need it.
Now, from there, if you look at your Layers panel over here,
you can see, we'll zoom in,
you can see that this SVG is two different colors,
so we have a little green color and we have this tan color.
If you were to go to Make It right now,
because these are two separate colors,
this is recognizing it as two separate layers,
so it's going to cut on two different mats.
What you need to do is select both of these layers
and go ahead and weld them together,
that way it cuts it all as one piece.
So I'm going to click Weld,
and as you can see, it all changes to the same color,
and that's when you know
that it will all cut on the same mat.
Once we have that done,
we're going to go over here to Make It, Continue,
we are going to select the device
that we will be using today,
and then we're just going to cut this
on premium vinyl removable mat.
From there, we're going to load our mat into our Cricut.
Once that's finished, we're going to unload our mat,
and then we are going to start the weeding process.
Now, when weeding, when you are doing a stencil,
you are going to want to weed the part
that we normally keep with vinyl,
so you're going to weed the letters out,
and you may want to be careful when weeding
because there are some smaller pieces in this design
that we do not want to miss.
Now that we have all that weeded,
I'm just going to cut out this area here,
and then I'm going to take some transfer tape,
and I'm going to place it on top of our vinyl,
and I'm just going to burnish it down.
Yes, I'm burnishing it down with a bone folder,
but hey, sometimes you gotta do what you gotta do.
I'm going to rub my glass down with alcohol
so that I make sure that this adhesive sticks very well
so that we get a good crisp line with our stencil,
and now we are going to add our design to our glass.
You do want to make sure you get all of the bubbles out
and make sure those edges are down very, very well,
and then we're going to take our transfer tape off.
Now, what you may want to do is you may want to come back in
and these smaller pieces, kind of move them around
because they can move around,
and just make sure you press them down really firm
onto your glass so that you have a good, nice seal on that,
and then we are going to start the etching process.
So first thing you need to do before you start etching
is you need to put your gloves on
because safe crafting is the best crafting.
Now we're going to take our armor etch and our paintbrush,
and what we're going to do is we're going to paint
the armor etch onto our stencil.
Now, if you are not comfortable,
if you're afraid that your armor etch
is going to get off of your stencil,
you can tape all of this off around it.
That way you know for sure
the armor etch is not going to get on it.
That's going to be a personal preference,
whatever you feel more comfortable in doing.
I personally think that taking your brush
and moving this armor etch around
and continuing to paint it kind of all over
really helps get down in those grooves that you might miss.
I like to have a pretty thick coating,
so I'm actually going to come back in here
and add just a little more over top.
I know that this is covered,
but I also like to just make sure
it's covered very, very well.
I would probably move it around with my paintbrush
for at least one or two minutes,
just making sure it gets in there in the grooves
and moving it around.
Even if you have to kind of push it in there,
that works as well too.
And now we are going to start our timer.
Now, the bottle directions say
to leave it for one to three minutes,
but I think five minutes works best.
So now I'm going to start my timer for five minutes
and we will be right back.
Now that our timer has gone off,
what we're going to do is we're going to take our paintbrush
and we're just going to take this excess armor edge
and we're actually going to put it back in the bottle
because you can reuse this multiple times.
So we're just going to very easily take this
and kind of just put it back in this bottle.
And now I'm going to take this to the sink
and I'm going to wash the rest off.
Now, make sure you do leave your gloves on for this
so that you don't get any of this on your hands.
So leave your gloves on, take it to the sink
and we're going to wash this off and we will be right back.
Now, one little trick that I like to do
before I actually take my stencil off
to make sure that all of the pieces
that I want etched are etched,
is I like to take my project
and I like to hold it up to the light.
And then you can see what places etched very well
and what places did not.
Now you do have to make sure that it's very dry
because otherwise it's going to look like it is not,
it has not been etched.
So by holding this up to the light,
I feel like it looks pretty good.
So we're going to go ahead and take this stencil off.
Now, as you can see, this is great as is.
However, if you want to add a little color,
I've saved one of my gloves
and I'm going to show you how to do that with Rub and Buff.
Now, before we get started with the Rub and Buff,
there's one thing that I do want to say.
I only suggest doing this on something
that you plan on not washing.
And here is why.
I've tested this on, tested adding color,
I tested screen print ink, I tested the Rub and Buff,
I tested two or three different types of this,
the paint and everything.
But when it was on something that I planned on using
and washing on the outside of,
let's say like a wine glass or something,
every time I went to wash it, they would all come off.
So I would only suggest using this on a decorative piece.
So please keep that in mind.
We are just using this on a decorative piece.
So what I'm going to do is I'm going to take my Rub and Buff
and I'm going to put a little bit of it on my finger
and I'm going to have a paper towel ready.
And you're just going to come in here
and you're going to work this in these edges.
Now, this dries pretty fast.
So I would come in here and wipe this fairly quick.
And then you're just going to keep working this around
until you have all of the etched area
covered with Rub and Buff.
And then we're actually going to come in
and do one other layer as well.
We're going to start down here in the corner
where we missed it a little bit the first time.
I will also say this,
I did try doing this with the stencil still on as well,
thinking, oh, that would be perfect.
I won't have to wipe any of it away.
The Rub and Buff actually just ended up
building up around the stencil
and it just looked really gunky.
So this was the best method that I found.
And there you have it.
You have a beautiful custom shelf sitting piece
that's going to be beautiful for the holiday season.
Now I'm just going to add in some little details inside.
And there you go.
I really hope you have enjoyed this tutorial
and I hope you have learned
all that you need to know about etching on glass
and adding color to your etching design.
Once again, if you are new to our channel,
make sure you like this video,
hit that bell notification and subscribe to our channel
so you don't miss out on any crafts that we bring you.
If you are wanting to learn more or join our community,
make sure you check us out at makersgonnalearn.com
where we always bring you the inspiration,
education and motivation to get crafting with your Cricut.
I will see you guys in the next one.
Bye.