How to stucco cement retaining walls

We Can
46 followers
6 Video Views·Nov 15, 2022
Hi guys, Kirk and Jay here with Kirk Giordano plastering. I'm actually on one of Jay's jobs
here to prove a point guys I've had a few people in the last two three weeks call me and say man
I got concrete I've got cinder block walls one guy said he was going to put wire all the way
around it he says look I want to wrap the wire should the wire wrap all the way around or should
I stop it or can I put the wire and then put the corners so I'm going to answer that question this
might be a long drawn-out video so unless you got anything better relax okay number one the fellow
who said gee should I put wire on he said he had a concrete wall and so this would would happen if
you were to put the wire here now this wire if you hug the wall that'll be okay but here's the
way this wire goes on and so you'd have to put a nail here a nail here a nail here nail here
here that would be a lot of wires concrete and cinder block it is simply not necessary
to wire it even if you use a 3.4 it is not necessary guys never encountered a instance
where it was if it's that bad tear it down okay to try to wrap the wire because the fellow says
well I'm going to wrap the wire I'm going to do it anyway and I said well you can do that man but
I've only been doing this 30 years and I'll tell you I've tried everything at least twice here's
what happens if you wrap it okay now you're going to be putting concrete nails what's a concrete now
I'm going to show you in a minute you'll put a concrete nail here here here it'll take you about
an hour it would take me about an hour and then if you try to put a corner aid on that what happens
is it's all wiggly because you're going a corner aid over wire it's a nightmare guys how do I know
I've done it I don't do that anymore here's what you can do if you want you can put a corner aid
on it and you can put a concrete nail here here here and three on this side and now to give you
a nice clean even corner but that's not what today's video is about today I'm going to show
you how to make a corner without the corner aid and by the way guys here's a there's a little
bucket and what this little bucket has is concrete nails concrete nails we use generally are these
half-inch if you use this one inch that's easier to hold but you'll blow the corners out and one
guy says well it's concrete it has no corners and I told him guys you'll blow it out trust me I've
been doing this stuff too long here's what happens guys okay what is this this is a magnet you can
get this online at bond tools you can go to Westside building supplies get this magnet why
do you need a magnet because if you try to put these concrete nails in just for an example guys
like this and tap it your fingers are too fat and plus I bloodied enough and lost enough fingernails
when I was young trying to do this goofy crap it doesn't work so here's what you do you get a
if you're going to do corners guys you get a magnet and you put it on and here's what happens
when you put a concrete nail into concrete you blow it out and yeah I can blow out about ten
different other spots to prove a point but you get the idea if you're using if it's cinder block well
then you put the concrete nails into the grout lines it won't blow the grout out and that is
how you would hear that I've done it I've done a few videos on that already so I won't repeat it
on here what I am going to do is show you guys something as far as how to make a corner by
yourself now Jay is with me and what I prefer guys is a piece of metal if I and I do have a
piece of metal I've got a Darby I can put here I've got rods 10-foot rods that we screed off
buildings to make sure that they're level every 10 feet by a quarter inch but again that's not
what this video is about this video is I'm going to show you how you we can put a two by four here
and make a straight corner we're gonna put some mud here my Rob Peter to pay Paul sort of speak
and fill this up and when this gets hard we just pull this away and of course the stud has got to
be wet when I was Union 30 years ago we would gun all of our work I worked with 20 other guys and
we worked behind pumps and my buddy Fred Smith he'd be shooting it and we'd come to a house say
we did about ten houses a day we'd be blowing it on there and we'd come to an area where the
lathers forgot to put a corner Oh Fred would say I was usually the Darby man so he'd tell somebody
else they go go to the truck get me a corner they go to the truck say man I got no corner
dang go ask one of those carpenters for a two by four not a two by six because they're too heavy
eight foot two by four or a ten foot if nothing else and what he would do is he'd take a two by
four wet it and just like so why do you wet it because if you don't wet it when you put it against
the wall here and you pull the stucco the stucco will come off because it'll suck into this I'd
always catch him doing this stuff too and I think dude what are you doing he said I'm looking to
see that the two by four is not tweaked or twisted because if it is when I do my corner that's going
to be tweaked or twisted anyway to prove a point I'm going to go ahead and put a little bit of mud
on this right here again Jason already did all this and I actually was working around the corner
on one of my jobs while Jay was working here but I told him if he got a job where I could answer a
question to let me know and he called me to do with that I have this job and it has a corner
did you still want to come over and I thought no but I will because I promised the fella I'd show
it to him so what we want to do guys and now granted this wall is concrete how do you know
it's concrete well you can look at it it's form boards they put a bunch of boards here and they
poured it these are form lines this is not cinder blocks but the same thing applies you have to
apply enough stucco otherwise these form boards will show I get asked that so often people say
hey how much stucco do I got to put on and I'll tell them you got to put on at least a half inch
and if the form boards or the grout is really sticking out a little bit more man it doesn't
take that long all you do is you're trying to fill it because if it rains and you put it on here's
here's something guys if you put it on real thin like they say this and then you try to float that
when it rains you'll see all that grout so what we want to do is put it on thick another thing what
I'm doing here too is we are doing the cap here Jay already put a coat on that cap so I'm gonna
I go up like so when I do my cement so see that right there now take this this way it gives me a
stronger cap and no we are not wiring any of these caps because it's not necessary if we tell folks
we'll wire it and that's usually because of a reason like you'll have a joint a joint there
like say hardy board I got a barbecue coming up where it's all hardy board and I told the guy I
said well I'm gonna put corners here the other guy said he wasn't gonna put corners and I said
well the other guy doesn't understand that it's kind of like two pieces of sheetrock you got
hardy board here hardy board here and if you don't put a corner there you're gonna get a hairline
crack every single time so that instance we will put corner eight on here no okay getting back to
what I was trying to say first thing I'm gonna do is because I'm gonna put this stud on by myself
right here I'm gonna fill this wall up right here all I'm doing here is I'm giving myself some mud
do I there's about ten different ways to do this guy I'm just putting this mud here because I'm
gonna use this mud to make my corner and I don't want Jay to help me otherwise it defeats the
purpose now let's see this stud is kind of looks like the termites had a good meal here this side
is pretty good and remember guys if this stud is dry when I put this here it is going to come right
off now what I want to do is I want to go about a half inch a half inch corner I'm gonna hold this
with my knee hey now I'm holding it with my knee now I'm gonna take this mud I just put here and
fill this up now you guys if you're not really experienced probably have a hard time doing this
but I do this every day all right now I'm holding it with my knee I'm holding it with my knee and
I'm trying not to get dirty at the same time how about that all right put it on like so get that
bottom all right a little bit more right here right at the top okay we're gonna take it up one
more time squeeze it take this come that way now all I'm doing guys is making that transition where
I put all that humpty mud squaring it off a little bit we are gonna float this all right now when I
pull this piece of two by four can this whole thing fall sure I can I've done it where a few
times it's fallen but for the sake of showing you guys hopefully it won't okay now to pull the stud
you're gonna push down or push forward and sideways it up you don't have to look at it guys
I mean if I pull this way what happens the whole corner comes off so I'm not even gonna look at it
but I'm gonna pull that way away from my work and upward should have stuck it stuck like magic how
about that I'm an artist okay now if you come on this side take a peek there Jay now that side is
groovy all I got to do is this I'm gonna make by hand now we got a nice clean edge there guys we
let that set about 15 minutes and what Jay is doing right now is he already started floating
I'm gonna come over here come over here let's see what bucket you got okay again for the sake of
showing you what Jay's doing actually Jay did this whole thing I just wanted to do that corner and
that corner is not really ready but a fellow like me with so much time in can't handle it all right
just for the sake of showing you guys something this is wet this wall is wet a lot depends on
this guys if you're in Pennsylvania Canada or someplace where it's really cold it's midwinter
winter you're gonna have a hard time doing this this wall we are in beautiful Oakland California
right now and this wall it's about 65 degrees if it was a hundred degrees I'd be saturating this
wall over and over and over otherwise as fast as I go to apply it sucks right into it so it's not
ready right now but I can make this work I need at least another Oh 20 minutes to let it set but
for the sake of showing you folks now what we're doing is we're gonna float it what is floating
means that means there's sand in this cement plaster cement plaster is another word for stucco
people keep calling me saying hey what should I buy stucco or cement plaster it's the same thing
guys it's I call it mud to mud cement plaster stucco it's the same terminology the same the
same stuff Portland cement mixed with sand if you guys go to Lowe's or Home Depot you'll buy your
probably you'll buy rapid set and it has sand and the Portland cement and stucco in there already
all you do is add water what we do is we buy Portland cement you see the truck right over there
you want to focus over there that Chuck we put two two yards of sand in it that's like 4,500 pounds
of sand we put our Portland in that mixer and we put the sand but if you guys again I'm asked this
question all the time should I buy sand separately we're professionals we buy our sand and cement
at Westside building supply or any of the other plaster and material yards such as clothes cow
ply you name it okay get back on what I was talking about I'm gonna float this right now
although it's not ready now if I float this way what's gonna happen guys all you do it yourself
weekend warriors who watch what we do if I float this way I'm gonna pull my corner right off so
I'm gonna float this way because I want it to adhere now I'm gonna hit it real light because
if I hit it too hard it's gonna come right off because technically guys it's not ready to go we
just take it sideways and because I'm hitting it while it's wet I need a clean float I take this
part here and I just make my cap I need a clean float otherwise it's so wet that it'll fall my
advice to you guys who are trying to do this that's it how do you know if it's set if you put
your finger in it and it's wet like that guys it ain't set when you put your finger on it and it
doesn't move now you can be sloppy you can be you can have less experience and close your eyes and
float it and it won't fall down but right now just I want to prove a point because I got another
job I got to go to I'm gonna let Jay finish his own job but I did promise the fella I'd show him
this so I am doing it here we go okay the top we float the top and yeah I'm going slow as molasses
guys because it is wet otherwise I can float this whole thing in a matter of minutes the whole wall
I can float this whole wall in about five minutes okay you clean the float get all this stucco
cement plaster mud get it off you see where I'm going with this guys and when you plot when you're
using a float guys use the whole float I see guys like this they'll be using just a tip we call it
the toe or they're used to heal the spin you you'll spin your wheels doing this guy's what
you want to do is use the whole float kind of like you snowboarder guys you use the whole board okay
watch this I'm using the whole float you see that whole float the whole thing I'm not just using a
little heel I mean a toe or the heel the same applies with the top okay you want to get that
top clean don't mess around and do this kind of stuff guys you don't want to do that you want to
use the whole float okay you take that whole float you put it down here then you spin it around you
take that whole float and come down guys use the tools to the maximum benefit that means the whole
thing and yeah that does take practice guys and here's another thing guys the reason I can make
this look easy is because of two things for me it is and because Jason already mixed up some good
mud or actually who did Jason's spreading this is his job again use the whole float see how I'm using
that whole flow guy a whole thing guys gives you straighter lines it makes the job faster and once
you learn how to coordinate with the tools you'll get it it again most of you weekend warriors who
do stucco work a lot of you guys have concrete just like this you'll learn to do it right guys
if you use the whole the whole float anyway I'm going to give this about ten more minutes because
even I can't mess with that right there because that's ready to go guys it's still too cold and
Jay has saturated these walls prior so we're kind of wet so anyway Jay's going to continue floating
this whole wall here and if if you're done with everything then you come back when it's dry and
what I'm doing right there is I'm throwing some of that mud off of here let's look at think what
the heck is he doing looking that float that's just another way to keep it dry because I want
it pretty anyway guys you see where that's going and you got any holidays let us set and come back
and get them out because I still have technically a half hour to 40 minutes where I can play with
this wall but I don't have the time anyway guys my name is Kirk Jason on the camera we thank you
for watching and as usual we'll see you guys on the next one once again folks we thank you for
watching and I really enjoy all your comments if you guys like this video please click the like
button down below and also if you enjoy what we do subscribe to our channel so we can keep making
these videos for you my name is Kirk and Jay we thank you for watching and from the entire
Giordano family we'll see on the next one
