7 Ways to be a Better Woodworker

House Love
61 followers
6 Video Views·Nov 15, 2022
7 Ways to be a Better Woodworker
Last Sunday we released the video on the glass coffee table build and it just came out gorgeous
and I had an extra level of fun on that project because it was very challenging for me because
I was doing these things that I had not done before. I had to set up new jigs, I had to think
about all of these compound angled pieces of joinery that all kind of come together as one
and if you watch that video you see I made a lot of mistakes but they were easily overcome because
you know over the years as a woodworker I've developed some skills that help me
think about building in sort of a more advanced way and that sort of got me thinking about you
know what kind of information could I impart on you guys that really helps you develop those
skills because there's lots of tips and tricks videos out there I've got some of them myself
but nobody ever talks about the skills that you need to actually grow as a woodworker because
those tips and tricks are great and there's lots of things that I still use today that I've seen
in those videos but nobody talks about the things you should work on to become an overall better
woodworker. So I've developed a list of seven things that I think are important and I want to
share those with you why they're important what they help you develop and if you have anything
that you want to share the comments is a great section to do that you know people really discuss
great ideas down there I'll have a list of links to everything I talk about so that way you can get
more information if it's a area that you want to expand on. Let me get started here with number one.
All right this first one's a little bit of a longer one because it covers sort of a broad topic
but I think it's the most important which is fixing your mistakes and thinking about different
ways to do things. Now I have a great video the link down below called seven common woodworking
mistakes and how to fix them but more importantly knowing how to fix mistakes gives you a lot of
confidence to just try stuff and overcome obstacles. Now when I was building that glass table
these are my test pieces which is a great example of another thing you should do is always cut
extra. You know I still screw up on every single project but I know how to fix it and I have the
confidence to fix it so we just blow right through the mistakes and recover from them and keep moving.
Now these are the the test pieces I did and it's great to do them as you're going knowing you may
need them because you can either use them as a test piece or if you need to sub them in to your
project you can easily do that without having to go back and remill a new piece of lumber and rip
it down to size and cut your joinery and one of the biggest mistakes I made on that project was I
glued up my table before tapering the legs. Now tapering the legs on that sled I built a couple
weeks ago the Katsumos multi-sled would have been so easy we could have just put on that sled
ripped it down table saw I would have been done with the legs for both tables in five minutes
but I cut myself I got distracted and we just glued up the project and now I have a triangle table
that doesn't sit flat on anything and I got to figure out how to taper the legs so I ended up
having to make templates you know which took me a little while and then I ended up having to do this
weird clamping thing with the router where we clamped the table on these two sawhorses further
out routed the end of the leg and then we had to move it over here and route the top and then the
middle and do it in three steps it took gosh took three hours of the day I believe point being is
that I knew there would be another way to do it so I sat down I said okay I made this error which
you know a few years ago I probably would have been like oh this project's screwed up I can't fix it
I can't do it or I would have found some crazy way to do it that might not have been safe but
you know now I sat down and I thought about I said okay let's come up with a simple way to do this
and get it done so let's talk about the next one next thing I want to talk about that is a great
thing to always have in your mind when you're woodworking is taking small bites I think one
of the biggest mistakes I see people make is they try and hog out huge amounts of material with
underpowered tools you need to think about the tool you have and how to best use it now when I
was making the glass table this is how we cut the bridle joints in the jointer and you can see I was
this is the exact setup I was using it's a little bit over a quarter inch and I was taking full
depth passes but this is a five horsepower saw and if you saw how I was doing I was going incredibly
slow now that was a big bite even for this massive saw and one of the mistakes I made early on that
sort of taught me this was I tried I've seen people resaw on the table saw sometimes they do
it so there's less you're taking less material with your bandsaw which is a great move because
bandsaws are typically very underpowered and when you try and resaw you're removing a huge
amount of material so sometimes I've seen people resaw it slightly with a table saw first and then
go over to the bandsaw and do it which really helps take the stress off the bandsaw same thing
with routers now this was the leg blank that I used for that glass table and I ended up having
to route it out like I was talking about with the router but you saw on there that I went to the
sander and took off a huge amount of material first because a router is not capable of just
ripping through this you need to make sure that you're working within the capacity of your tools
and just because you have a bit that's two inches long doesn't mean you can just take two inches of
material just because your 10 inch table saw blade will come up two and three eighths of an inch does
not mean you should make that full pass so what I like to do is I live by like a quarter inch rule
so if I'm resawing on the table saw I'll do a quarter inch at a time flip the board over do a
quarter inch with a router a quarter inch is probably way more than you should quarter inch
is probably way more than you should ever be taking so uh if I have to I'll get a hand plane
and take off material or I'll use a saw use a skill saw on a track but the point being is that
you know injuries can happen when you try and take off too much material you know if you go to a
jointer it's possible to take off a quarter inch on a pass but that's insane there's no way you
ever be doing that I never take more than a sixteenth on my jointer and it's you know two
and a half horsepower jointer so point being you will be better at woodworking if you focus on small
bites there'll be less burning less edge damage less chance of injury and you'll be able to focus
on the task at hand and when you take off a small amount of material it's it's much easier to get
the work done that you want to get done all right let's move over to the bench and talk about the
uh hold on I need my whiskey I mean my coffee oh sorry I didn't see you guys there uh the next one
that's so dumb but we don't hide our dumb jokes on this channel so next one is make a plan one of
the best things I ever did for myself as a woodworker was learn how to use fusion uh there's
a great class that I'll link below that is just for woodworkers first one I've ever found for
woodworkers and I thought I was good at fusion but then I took that class and it like upped my game
by a million percent and the reason why that's so great is making a plan makes all the difference
and if you don't want to learn CAD that's fine you can just draw on a notebook and I wanted to
give you an example of that when I came up with the sled idea I always keep a notebook with me
I drew it out and I said okay how does this work and I started with just a terrible pen drawing
and that eventually became what you saw in the video is the free plans that are available on my
website for the sled and there's a couple more pages but it allows you to visualize and work out
the problems before you ever cut a piece of wood and that is instrumental in success is having a
plan because if it's just in your head and you're trying to get it done it's a very inefficient way
to build when you draw it helps you work through some of the issues you may run into or difficulties
in different types of joinery or angles and things like that and think about how you're going to cut
them the other thing that's great especially when you're doing furniture like this is the
small table base from the glass tables it allows you to visualize it and one of the things I could
tell when I printed this up was that the legs needed a really big taper and otherwise it was
going to look so blocky and sort of angley and not as angley a word and not really aesthetically
pleasing so I was able to look at that and say oh my gosh this really needs a big taper and then
you know I didn't have to even draw that right then I just knew when I got to that part of the
project I should cut a very large taper I ended up drawing it later before I did it just because I
those templates but point being is that is something that I saw and was like okay that's
something that we need to fix before we ever start building so make a plan I highly suggest learning
CAD I'll link that class down below if you're getting into CNC too he has a CAM CAD computer
assisted drawing and then CAM is computer assisted manufacturing he has a class for both
it's just for woodworkers and it really makes a big difference and honestly Sketchup's great
but it's very rudimentary compared to what you can do with Fusion so a little bit more of a learning
curve with Fusion but I highly recommend it because there's so much more you can do and so
much more planning and execution that can happen before you ever start building. Let's stay here
and talk about the next one. As you'll hear me say in all of my Joints of the Weeks video there's a
reason we practice joinery and this sort of tip is about practice in general and that the devil
is in the details. Now when I do all of these Joints of the Week that you see behind you I don't
do them just for show I do them because it makes me better there's not been anything I've ever done
in my woodworking than that Joint of the Week series that it has improved my woodworking more
and the reason is is you have to get good at hand tools. Now you hear people say practice
makes perfect but I like to say perfect practice makes you better and so that involves sort of
learning watching videos from there's lots of great people on YouTube who make instructional
videos watching those videos maybe take some notes so that way when you go out into the shop
you can practice the steps and the techniques that they use to get really good at it and the reason
that makes such a difference in your woodworking is that when you get towards the end of a project
or especially in fixing mistakes there's lots of times where hand tools really really help because
there's little things like for example the legs in my entry table you'll see on there that
I chamfered the legs with a hand plane in a really you know I was 45 degrees on the corner
and then I drew a line and I tapered the leg inward using a hand plane and it made it was so
subtle that anybody who walked into my house would never say like oh I love the taper on the inside
portion of those legs but when you look at it visually the legs have this narrowing at the
bottom that makes so much of a difference aesthetically things like just breaking corners
I'll show you here in this b-roll clip you know the difference between a sharp corner and one that's
just been hit a couple times with a hand plane or a piece of sandpaper makes a world of difference
so get out in the garage and practice things the great thing about these joints of the week is it's
like three dollars in lumber and the only thing that you lose is a little bit of your time but
you have everything to gain because when you're finishing up a project all those little fine little
accoutrements or however the heck you say that word make a big difference so you want to practice
and really get good at your hand tools and your sharpening because those are the skills that make
a real difference in the final aesthetic of your piece let's come into the bench and talk about the
next one all right the next one we'll talk about is measuring marking getting things square if
there's any area in your shop you should not cheap out it's on your combo squares and measuring
devices I have a great video called superior accuracy and woodworking where I go into
extreme depth on all of my measuring and marking tricks but what I think is most important is that
you get a good combo square and learn how to use it I have a great video all about combo squares
as well as where to get these two here they're blems so they're like half the price they're just
as accurate as like the hundred dollar 12 inch squares you see like from starrett or miditoyo
in fact this is a miditoyo you can see it's been scratched out but it makes a big difference when
you know your stuff is square another thing that is really important is you always use the same
measuring device throughout a project you have a combo square and a tape measure now these are both
common tools you'll use for measuring but check them against each other make sure they're the
same a great example of this is when sean boyd used to be next door he had this one tape measure
brand that he really liked and he had four of them and one day just out of curiosity we took them all
and measured out to 12 inches and marked it and they all were slightly off from each other now he
would keep those all in a line and just kind of grab them randomly throughout projects clean up
the end of the day then come back the next day but one of the things that happens in woodworking
is you know a small error of like a 30 second isn't probably going to make a big difference but
you get compounding errors so if you're off a 30 second here a 16th there an eighth here
suddenly at the end of the project it's super wonky won't go together your glue up won't work
so it's important that you take a measuring device and stick with it and i think the most
important thing is to ditch your pencil i only use pencil for rough cutting and here's why okay
now here's why you want to ditch the pencil especially when you're doing joinery or final
pieces and this is exactly why i designed my apron the way i did with my square here and my
marking knife here because i'm right-handed there's also a left-handed version but
you take your square out and then you can make a line and the way that you get there is you take
your tape measure and let's say you wanted five inches you can go right to five inches you just
leave your marking knife right there and then you take your square up to it and then you have a line
and that's a terrible line and you have a line just like this and so you know that's exactly
at five inches but when you look at like a pencil let's start with like a 0.5 mechanical pencil
now not only do you have the lead but you also have this metal sheath around here so if you
thought you were at five inches you may be off by a little bit and then if you do that in four
different places suddenly you're off by like a whole 16th of an inch then if you look at it right
next to the marking knife line you can see it's substantially wider uh which you may not think
that makes a difference but it does then if you look at a carpenter's pencil you have even more
of that problem because you have this angle where it's sharpened and that's going to push it away
from the square too but look at the difference in the the size of the lead but that's maybe four
times wider than the mechanical pencil and 16 times wider than the marking knife so if you learn
how to use a marking knife and again i talk about this in great detail in my video called superior
accuracy and woodworking which will be linked again down below but it's important to get used
to it also cool little tip that a lot of people don't know is at the bottom of all squares there's
a little scribe that's very sharp so if you ever can't find your marking knife you can just pull
the scribe out and give yourself a nice little mark let's head over to the table saw and talk
about my next tip the next thing is jigs jigs jigs you should be making jigs here's some ones that i
use very very regularly this is one we use to chamfer the dovetail jigs and this is one we've
had for several years and we keep making new ones because you know we probably could hold it by the
post and chamfer it on the router table but that wouldn't be safe or efficient so we can just lock
in here do it real fast jig can be as simple as like a magnet like this that goes on your cast
iron table saw uses a stop block with your miter gauge or i've got a crosscut sled here stop blocks
are essential whether you get mine or make your own or just clamp a piece of wood to your jig
it makes a huge difference repeatability repeatability repeatability is the name of the
game in woodworking if you can't cut four legs at exactly the same length you need to step up
your game got this mitering this spline jig which i use all the time for mitered corners
this was a bridle joint jig that we used in the glass coffee table for angled bridle joints
i've got a great video on making 90 degree bridle joints that we used for the infinity cube table
you know from where i'm standing i can see 11 other jigs that are just here that we use all
the time so figure out how to make things repeatable if you have to do more than one of a cut
a jig is probably going to be great for you so never just grab your miter gauge and say okay i'm
going to measure to 12 inches on 11 different pieces and cut them here let's just get a stop
block and make this easy and you know like i said it could be something as simple as this magnet
jigs make a big difference in your woodworking and that's why you see tons of videos on them
let's head over the bench and talk about the last one the last one is a simple one but i
really think it's the most important woodworking is supposed to be fun your hobbies are supposed
to be fun and i'll tell you from personal experience the job i have posting public content
on youtube and instagram uh there's mean people people are mean to me every single day so you
have to have a really thick skin but i know especially from even today somebody will say
something that kind of nips at one of you know an insecurity i have and it'll bug me all day
but the point is do what you love there is no right way to do woodworking there is no gatekeeping
that anybody can do that says that you shouldn't enjoy your hobby the way that you want to enjoy
it and so that just means you should do what you love if you like epoxy tables great go do it if
you like cutting dovetails great go do it but don't let anybody tell you that you're wrong for
doing it the way that makes you happy so remember that we all make mistakes but it's just we're
trying to have fun we're trying to do things that give us fulfillment and enjoyment and nothing
is better than seeing something that you worked really hard on done and regardless of how it came
out don't tell people about your mistakes because nobody's ever going to see those they're not going
to notice that little piece of gap in your joinery they're just going to see that somebody they know
spent hours of blood sweat and tears making something that they're so proud of so do what
you love don't gatekeep anybody let them enjoy their hobby the way they want to and you enjoy
it the way that you want to uh and more most importantly be nice to people and build them up
no matter what it is so you know what i'm proud of you for trying you know there was a day that i
had never built a piece of furniture and then there is today and at some point i had to start
and i was terrible when i started but i got better and better and better and i am now the
gatos moises you see before you here today but the reason that i think that is so important is i've
enjoyed every step along the way and i learned something new every time i built something even
today so guys thanks for watching if you want to support the channel head over to the Katzmoses
store pick up a dovetail jig an apron or a stop block stay safe in the shop
