Japanese Castle_Shiro Joint - Joint of the Week (Furniture_Timber Framing)

House Love
61 followers
8 Video Views·Nov 14, 2022
Japanese Castle_Shiro Joint - Joint of the Week (Furniture_Timber Framing)
So this is a joint and honestly I've heard it called a lot of names. Castle joint,
Korean fist tenon, Japanese locking mortise and tenon joint. But this is a joint that Sam Maloof
used in a lot of his furniture. It's been used for thousands of years in Korean timber framing
in Japanese furniture and the reason is it's just so incredibly strong. It's pretty easy to do,
layout is absolutely key and just taking your time and fitting things together. But
all in all this took me about an hour to cut with filming. So it's really not that difficult of a
joint. Let me show you how we get it done. So our first step in making this joint is preparing the
stock. Now it's really important that all of your pieces are square and the same. So what we're
going to do, we're going to joint plane these and get them down. So I'm going to aim for two inches
by two inches. We might be a little bit under. One thing I suggest is that your number is easily
divisible by three. Just make your life a little bit easier. A lot of this is going to be measuring
third, third, third. So we're going to head on over to the jointer and get started.
So now that our stock is prepared, everything's square, it's all the same size, we need to do our
layout. Now you could go about this several different ways, but let me show you my plan
of attack on this. For me, I think the way I'm going to attack this is I'm going to start by
cutting my main piece and then my mating pieces second. That way I can get these to fit to this.
The least important part is the half lap between these two joints. That can be kind of loose
because when this comes in and locks in, it's going to lock everything together. So ensuring
that all of these cuts are square and precise, this joint is going to be come out square and
really, really strong. So I'm going to start by cutting these out here on the table saw.
Let me show you how I go about doing that. The layout is ultra important. So this is two inches.
We need essentially a third of two inches, a third of two inches. We have to make sure that we stay
on the right sides of our lines here. So we're going to go ahead and set up a little system here
with the crosscut sled to do that and making sure everything's square. So here we go. Okay,
so on these, you're going to know whether you're right on the money. If these are essentially
perfect squares, you can have a little teeny bit of play, but you want to just verify that
everything's all good to go. Okay, now that we've got our lines cut for our tenons, we're going to
have to clear out this waste. And I'm going to do this with a coping saw, a chisel and a mallet.
I feel like I'm going to get a lot cleaner that way, but you could easily do it with a table saw
and a flat bottom blade. I just feel like to set it up and make sure it was square every single
time would be tough. Unless you were using a tenoning jig that slides along the fence of
your table saw, that would be great too. This is the way I'm going to choose to do it, but it's
not the only way to do it. So let me show you how I clear this out and clean it up.
Okay, so now that we've cleaned up and cut out all the pieces for our leg piece,
it's time to lay out the the half laps and the mating pieces here. Now you want to make sure
you orient your grain the way you want it to be and place it where you want it in that section
of the mating piece. But all I'm going to do is place it up against very carefully, hold it in
place and take my marking knife and simply just mark up both sides and then using my square I'm
going to carry those lines around the piece. So I have faint lines right here and just like in the
essential skills for accuracy and woodworking video I did, I'm going to slide my marking knife
into that line, slide my square up to it and just simply deepen it up. Now we know that because we
want these pieces to fit that when we cut these we're going to need to take those lines to the
very edge of the line to make sure that piece has a little bit of wiggle room to fit. So you kind of
want to go over that line by, I don't know, a very very small minuscule amount. Just for
posterity's sake we'll check that, make sure it's all good and it is. So now we need to set our depth.
A good reason to have two marking gauges in the shop, we haven't changed our depth here. So I'm
going to mark a third in here, flip it around, do the other side here. Just checking it, making sure
that that's going to work and it is. So then we can now continue our lines with our marking knife
to that gauge line. So you can see that's going to be where all of this is going to be removed
and we're going to do that for both pieces of maple. Now that we have most of our mortises cut
we're going to start cleaning them up. Use your saw marks as a great gauge for cleaning it up with
a chisel or a rabbeting block plane or a shoulder plane and make sure you're testing as you go.
So you want to make sure you know that glue is going to cause things to tighten up. So you want
it to be sort of loose but not too loose. I mean you want like just a hair's width worth of play
in your joint. So you want to be checking this measurement here and making sure that's right
and then this measurement here. So right now mine doesn't fit yet. It fits into here but it doesn't
fit crossways yet. So we need to clean that up. I'm going to use my saw blade marks as my gauge.
You can see here I've already cleaned off my saw blade marks just barely gone like right to them.
So that's what I'm going to start checking because I know with my layout lines I'm not even quite to
it on this one yet that that's exactly where I need to be. So when I start getting really close
I'll know because my saw blade marks are gone. So I'm going to start working on those.
Okay so I can't stress this enough. This is the part of this joint where you really need to focus
on all the details here. So what I like to do when I start to get it to fit I start to feel whether
each of the posts is proud or low of the surface. So here I can see that my B the walnut is a little
low compared to the maple whereas on my A side it's dead even. But then if I go over here I can
feel that this is the walnuts proud here and low here. So I know that I need to take a little bit
off this corner and off of this corner and that's going to allow it to sit flush. So ideally you
want it to slide on without having to hit it with a hammer but it should still be hard to push on
and all of these should be flush all the way around. And that's how you can really adjust
and make sure this joint fits perfect. Because this is the critical part and if you do this and
take the time to get this right you're going to be really really happy when you put together your
piece of furniture. Okay so now that we have our pieces fit up our mortises cut it's time to do the
half lap in between them. And so when you do this make sure you give yourself some leeway. This is
the point where three separate pieces are coming together that are maybe 1 1 28 off a little bit.
So give yourself some room because this joint is going to get locked in by these four posts.
Doesn't need to be super tight it just needs to accommodate the other one and once you get glue
in there this thing won't go anywhere for a thousand years. So what I'm going to do now is
I'm going to put in each one of my pieces and I'm going to use my marking knife. I'm going to mark
out the whole thing just so I know and I'm ensuring that I've marked all my pieces which way is up
here. And I'm going to mark out each side and then when I go to cut these out and do the half laps
I'm going to ensure that I kind of take a lot of that line and make sure. So I'm going to put my
other piece in there mark that out and then I'll do a little bit of layout and cut our half laps
for this. So now we're going to do our final fit up before glue up and when we finesse these joints
in one of the things you want to do here is chamfer the corners that you're never going to see.
And that's going to really help things go together. Our inside joint here is plenty loose enough but
I just want to make sure that everything there's nothing that's going to snag up here when I get
glue in the final joint. So I'm just going to chamfer all these corners where everything goes
together that everything that's going to be hidden I'm going to take down the corners just like this
being careful not to chop your fingers off and then we'll do that on our other piece here. One
of the things when I just tried to test fit it together where I got a snag was just from this
tear out here was binding everything up so just make sure that you get everything put together
and let's head over to the bench and do a final fit up and glue this thing together.
All right so I've gone ahead and thrown some lacquer on this and man did this come out really
really good. You know I can find the mistakes but really I don't think anybody really would be able
to see them. It really it's beautiful it was easy to put together you can use this so many different
ways in cantilevered tables in chair furniture in timber framing but this is a really cool joint
that you should put in the put in the old wallet you know bring out when you need it because
uh it's strong as can be this will never break I bet you could put a thousand pounds on this
sample piece much less a table or chair you made. Guys check me out on Instagram if you're still
watching subscribe I'm sure you enjoyed this video go to the store get some shirts get a
dovetail jig CNC alignment board we've got all kinds of great stuff over there.
Thanks so much for watching stay safe in the shop guys and have a wonderful day.
