This Wireless RV backup camera is comparable to other more expensive wireless backup cameras and super easy to install!!! This is the FX11L wireless backup camera by FXT Technology.
The kit includes backup camera, backup light, 7 inch monitor and various screws and bolts. #FXTtechnology#rvsafety#rvlife
❇️ Harvest Hosts (Get 15% off your membership with this link) ❇️* Interested in becoming a Host? The link below is for you as well! http://harvesthosts.refr.cc/danielras... ================
All Rights Reserved - Cherish the Journey, LLC We create videos for entertainment purposes only. Although we share our tips and tricks that work for us, we are not travel or RV experts, therefore it's important to do your own research to find what works best for you. =====================
All right guys, welcome to this week's video. Today is a little bit different. We're actually
going to be installing a backup camera and we're going to show you what brand we got.
We're going to tell you the reviews of it and right now we're going to show you how to install
it and this is what it looks like. So we got the model that you can replace the one of your
indicator lights on the top and then it has the backup camera integrated into it and
it should be a seamless simple install. We're just going to take that center light down.
We're going to install this guy up there. A couple tools you'll need. A screwdriver,
some wire strippers are going to be helpful. You can use electrical tape but what I found to be
extra easy is these little dolphin wire nuts. They're not really nuts but you just crimp them
once you put the wires together. Then you use your wire strippers and you crimp them on,
crimp the wires together and you're done. So let's get started and let's hop over to the install.
All right guys, so we're up here by the lights and I've already gone ahead and taken off
the light cover to the center light and what we need to do is just take out these two screws
that are up here. So let's go ahead and do that. So once you've got those two screws removed,
now we can go ahead and pull the light fixture away from the RV exposing the cables behind there.
It is important to note that if you do not have an existing red and black wire that you use a
voltmeter to find out what is your positive cable and what is your negative cable. So that way your
camera will indeed light up when you turn the lights on. When I tried to use the old screws
that came off of the old light fixture, I quickly realized that those would not be sufficient enough
to hold the new camera up there as this is a little bit heavier. So I had to go with a bigger
screw head so that way it would be able to grab the wood that is behind there and make it more
secure. All right guys, so we're here in the truck and we're going to mount our backup camera monitor
and what this one came with is a rear view mirror mount and you can see kind of just elastic bungee
over it. So real simple, easy, pop it on when you're using the trailer and you can take it off
when you're done. We're going to put that on right now and get it plugged into our power
and then we'll be good. Like I said, we got the mount up. It's attached just right to the rear
view mirror. We got it on at least. We got power to it. So we just got to go through the menu and
configure it and get it to pick up our rear view camera and if you see the flickering it's just
because that's what comes through on cameras when you videotape a lcd screen. You'll see that
flickering. The way this camera works is the camera only gets power when you are hooked up
to your truck and it supplies power to the light then it will supply power to the camera
and that's when the camera will turn on. All right, so as you can see now we have
image on our screen. As soon as I got power to the camera it came right up. I didn't have to do
any options any menus or anything. There are a ton of menus or options in and on this monitor here.
You can tell the signal strength how good that signal from the wireless. The reason why you see
the number one is because you can actually have up to four cameras integrated into this system
and then what I did to adjust my lines is I adjusted the camera so that way it shows my
red line that's my stopping point. So I put it just outside where my tire is my spare tire
and I put it just up as you can see just a little bit so that way I know that is pretty much the
stopping point. Green you still got a little bit of room. Obviously it's just like a backup camera
so you can see how close you are to whatever's behind you and as you saw Jennifer waving that is
she was pretty close to the back of the rig but there was still plenty of distance.
So what I think of this system with the setup thumbs up. So if you like to purchase this
if you like the big screen let us know in the comments below and also we will have the
description the product description below and we'll have a link to the Amazon affiliate store
where you can buy it. That is it. Simple easy setup. Thank you to FXT technology for reaching
out and giving us a chance to do this product review of their backup camera. We hope that you
liked what you saw and if you guys are looking for a backup camera for your rig we hope that
you consider checking out their website which we will link in the description below. We really hope
that you enjoyed watching how we hooked it up and set it up and it was a very easy process
so we thank you for tuning in and watching and I think that's it. That's it. If you like this video
go check out some of our other videos as well. Give us a great big like on this video. Consider
subscribing to our channel if you haven't already and with that we will see you later. Peace.