Audi S3 8P - Modifications / Service!

MotoAdventuresYT
21 followers
6 Video Views·Jan 7, 2021
Magnetic Oil Plug - https://tinyurl.com/y33rr3mf
Gecko Air Freshner - https://tinyurl.com/yy2uzkk9
Red Coils - https://tinyurl.com/y2abbtlg
Instagram - MotoAdventuresYT
Facebook - MotoAdventuresYT
Twitter - YT_Motor
YouTube - MotoAdventuresYT
Thank you for watching! make sure to subscribe for more videos on this!
Comment down below and let me know what you think about this video as well as what you want to see in the future!
https://www.patreon.com/MotoAdventureYT
https://www.instagram.com/motoadventure
https://www.facebook.com/MotoAdventuresYT/
https://twitter.com/yt_motor
Okay guys, how's it going and welcome to another video, the best type of video any guy,
any content creator could want and that is having their car serviced. So obviously before we get
this thing mapped we definitely need it to be top-notch ready to go because I definitely do
not want to freaking put it on a dyno and anything bad happen and still have to pay for the tuner's
time. So I'm going to go ahead today we're going to do spark plugs, we're going to change the oil
and filter and then I'm going to change the cam follower which will be in a different video
because I do want to do a tutorial on how to do that although there probably is loads of them
already online. But yeah and then whatever else I got because I got quite a few bits in the post
today. So if there's anything else that I could do a quick video on I'll chuck it in this one as
well. So yeah I hope you guys enjoy. So first thing we want to do is open the bonnet, get a good look
what we're about to do and I think what we're going to do is we're going to drain the oil
and while it's dripping and draining we're going to go ahead and do the spark plugs. So that means
we've basically letting all the oil drip out and it's completely empty then and then while that's
dripping out we can go ahead do plugs and then both basically it's hitting two birds with one.
And this is the oil and stuff I'm going to be using. So Castrol Edge 540 advanced fully synthetic
I've always used Castrol 540 and I only go with Castrol really it's because
on my younger days when I had like two-stroke bikes and stuff it was always Castrol that always
made it run the best. So Castrol in my eyes has just always been really good quality.
We've got a genuine oil filter and we've got the magnetic
sump bung which I'll put a link in the description. Awesome little piece of kit
obviously it's magnetic so if any chunks or anything comes, there's a bloody hair on that
or something, comes apart it will just go ahead stick to the sump so that doesn't damage any of
the other components. And then I've gone ahead and got a little air freshener as well which I
have on one of these. And then this is the spark plugs so don't mind these two. This is
the plugs I'm going for there's the code NGK. Yeah pretty standard plugs. So yeah I'm gonna
go ahead and get the car the front of the car in the air take the belly pan off and
crack the oil filter hopefully that comes off okay because I know sometimes they're
an absolute nightmare to come off and I'm really not looking forward to it.
Side note this has actually come out so much better now that it's like fully like bevelled in
like it actually looks better in person than it does on camera.
Dead happy that that was definitely worth it. And yeah I don't know if you guys seen the last
video I had a little problem with my reverse sensor so this is the one from my old S3 as you
can see it's grey I had to take one of them out. Absolute nightmare guys if one of your parking
sensors goes definitely take a day off off work and just be prepared to have some patience because
I had to like literally take most of the bumper off just to get this parking sensor so I could
swap it with the with my spare one. Absolute nightmare but it's done now and hopefully don't
ever have to have another parking sensor. Okay so you're going to want to go ahead and get your
boot mat from your S3 that you no longer need and take off this bad boy panel here it's just loads
of torque screws and then it just slides backwards and comes straight off and as you see jack stands
both at the same setting just so it's pretty level and hopefully all the oil drains okay.
I'm gonna go ahead and grab your T20 torx bit for the belly pan and that's all it is.
So once you've got all your your torxes out unfortunately I've got six there's meant to be
eight but it does the job still. So literally as easy as that you just pull it down from the grooves
up there and we can put this over there. So your oil filter is right here you're going to take off
this cap which I'm going to take some pliers and that and then your sump button is right
here which I believe is a 17 and then this is like a 36 something like that not really
really big boy. I'm hoping I've got that socket but yeah let's go ahead and get started.
Okay so I've got my drain bucket and the size is a 19 not a 17 so you want the engine to be
sort of warm not scalding hot just so that the oil can thin.
Once you've got that off get your bucket and just do the rest by should be able to do the rest by
hand. I don't know how warm we are talking that's pretty damn warm luckily I don't need this bolt
so as soon as it comes up I think just say see you later come on fella. Oh we are pros look at that
not a single bit on my glove. Now I'm going to go ahead and let that drain
and we can start doing the spark plugs. So while the engine oil is draining you want to
head and take off the cap just to release any air at the top just so it can fully flow down.
Now I'm going to go ahead and hang that back up so super easy with these plugs unfortunately most
of these do break very often so what we will do is just push down and you'll be able to put it away
same thing for all them push down put it away push down put it away push down put it away
and you've got the whole the whole loom you just want to tuck it back like that and these can be
quite tricky as well so if you want to try by hand first like that just wobble back and forth
get them out I've had these out quite recently to do a compression test
so they're not terrible but if they're seized normally I'd get some flat heads and try and
pry it out there we go so there's all the four coils I'll go ahead and put a link in the description
for these red coils really like they look neat I don't really know to do anything but
they're just probably the equipment of having a nice fresh set of coils so you don't have any
spark issues or any concerns so go ahead get all the plugs out I believe they are
16 mil for this and you want to get a socket that has like a little sponge
or something inside so it pulls the spark plugs out and then yeah I'll go ahead and get all these
out and I'll get back to you guys okay so we've got our new plugs all out the boxes now so you
just want to make sure that you've got the right codes same code as what we have which they are
I've already checked it so that's the code you guys want and they're already the same size and
so they're ready to go straight back in and yeah here we go again so you just want to crush
the crush washer that the spark plugs come with so if you sort of feel it just sort of
I'm not going to go over any tight just good snug already
so that's it time to put the coils back in so with your loom you just want to pull it
towards you until you hear somewhat of a click
and then make sure again push all your coils down so everything is
definitely secure and have no worries cool so there you go spark plugs done now I'm gonna
go ahead back down there and try and get that oil filler off okay so I've just cracked it loose
luckily this is the socket I have looks like I must have bought it before for this
and I've just cracked it loose now so I'm gonna go ahead and I think I'm gonna put the magnetic
drain bung in and then remove the bucket over here so they can collect any excess that comes
out this filter and then I'll go ahead and come back to you guys once I've got the oil filter
housing off okay guys so I've got the housing off it was a bit of a messy job literally undoing this
was just pouring out while I was undoing it but anyway we've got the new one here the old one all
you want to do is literally just pull it out from the housing and it'll come straight out
so there's the new one it will come with a new new seal here which goes right in there
don't know if you guys can see it there that's it there replace that super easy and then it's literally
just a quick blob I might actually be able to put this on now there we go and then when you're done
you're just gonna click it in so that's it clipped in and now I'm gonna go ahead take that seal out
put the new one in and then it's ready to go back on the car okay so we've got the new seal in got
the new filter in and now we're ready to put it back on I'm not gonna bother cleaning any of that
up just yet I'm gonna go ahead and put this housing on and then just clean it up hopefully
I'll have some brake cleaner if you guys have any brake cleaner literally best thing to do
because brake cleaner will get rid of all that so yeah what we're gonna do is we're gonna go
ahead and just go up there give it a little twist around make sure you feel the threads
and it's all nice and smooth you don't want any cross threads any any bumps or any issues at all
with there we go look at that that's going straight in now so once you got that in I'll go ahead and
torque this actually because I don't want it to be tight or anything I mean loose I mean
right I'll get back to you guys okay guys so we've gone ahead got the new sump bung in put the new
filter in that's all tight that actually um has the new meters on the cover it says 25 new meters
0.5 25.5 and I've just done that one up pretty damn snug and again just wiping down everything
so that you guys know and myself if there's any leaks in the future I'm gonna know
that it definitely is a leak and isn't just any access and if you guys are wondering how come
everything's so like say sort of clean it's because I um when I first got it I degreased
all the bottom of the engine bay and um used a brush to get off any dirt and grime and then
completely under sprayed the engine just to um with heat proof paint obviously just to um clean
up as well as I'll know straight away if anything is seeping from anywhere and uh so far we are
good to go so I'm gonna go ahead and get this belly pan back on and then we're gonna put the
oil back in it sort of dawned on me that it probably better idea to leave the belly pan
off and put the oil in now and start it um while the belly pan's off so we can see properly if
there is any leaks that obviously with the belly pan off we'll be able to see the oil filter and
see if anything's weeping so I'm gonna go ahead and start putting the oil in now um I'm not 100%
sure how much this takes but I'm guessing it can't be any more than five liters and I've got five
liters so you want to clean up your uh funnel and get started okay guys so I've gone ahead put
all the um oil is topped up to the maximum level we still have a little bit left inside there so
for some reason 4.7 liters comes to mind I'm not too sure whether that is actually the
correct amount but for some reason it's in my head so go ahead and crank her on just to get the
in that oil filter around the block again and I'll check the level one more time okay guys so
I've gone ahead let it run for a little while um I'm gonna go ahead put the belly pan back on now
and then drop the car onto the floor check the level one more time and then we'll call it a day
and say that we are now done before I end this video I'm gonna go ahead and whack this little
air freshener in um and I'll go ahead and put the link in the description for you guys to buy it as
it just goes on the um the air vent and then uh yeah it's just like a little smelly so I'm gonna
go ahead unpack this and then I'll get back to you there we go cool little air freshener with
a little Audi logo little gecko for the quattro um scene so uh yeah I'm gonna head and end this
video here guys I hope you guys enjoyed um I've also got the cam follower to do next which will
be in the next video but uh yeah if you guys service in your car I hope this helped a little
bit um super easy and this could cost you like 100 pounds from a garage if you think about it
that way where literally if you go just buy some similar easy tools like what the sockets and stuff
I've used and some jack stands and a little jack you know you could do it whenever you want so uh
yeah guys I'll go ahead and catch you guys in the next one
