Big Build Off Competition week 5 - Final Assembly and the Reveal!

Hertoolbelt
34 followers
4 Video Views·Jun 19, 2020
It is Reveal Day (week 5) of the Big Build Off competition. A new virtual maker competition hosted by the original ‘The Builders Challenge’. 5 makers are competing against each other, putting their creativity and skills to the test building a TABLE.
The best part is that these tables will be donated to charities or families in need.
Follow along in this fun 6 video series, to see who will be crowned the Big Build Off Champ!
Thanks to this week’s sponsor Power Pro for the screws used to assemble this table.
Check out the other tables in this Big Build Off competition:
@YouCanMakeThisToo Caleb
@CReeves Makes Casey
@Designs by Donnie Donnie
Big thanks to The Builders Challenge for hosting https://www.youtube.com/channel/UCqksIdEPTp-pj4TXzLjGjyg
Hi, welcome back to Her Tool Belt. It is week five of the big build off competition and ready or not
it is reveal day. But first I have a little final assembly to do on my table. To help out with the
table assembly is this week's sponsor Power Pro, known for their screws that are engineered for
ultimate performance. The finishing touch on the chunky c legs is a small chamfer on the corners.
Prepping for leg assembly, I marked the center of the legs,
then marked a reference line where the legs will attach to each other.
Then I drilled pilot holes on each leg for the screws. I'm using Power Pro quarter inch by four
so I drill holes for dowels. Then I'll bond the leg pairs together with wood glue.
Next up is installing leg levelers on the bottom of the feet. I drilled a one and a half inch
diameter hole as deep as the leveler body and felt. Ideally I would have used a Forstner bit,
but I didn't have one that's one and a half inch. Then drilled a hole for the threaded insert as
Now I'm using the biscuit joiner to create slots for the z clips to attach to the tabletop.
Finally it's time to attach the top with the base. I'm using tabletop z clips with number six
by five eighths inch Power Pro screws. The z clips attach the tabletop to the base,
but they allow for seasonal movement of the wood. I'm super excited for this table to finally come
together. I've tried out new techniques, new materials, made plenty of mistakes, and have had
a blast building it. I will have build plans posted on my site soon for this table. It'll have the
step-by-step instructions, templates, sketches, etc. I'll put a link to them in the description
my channel. All of the tables in this big build-off competition turned out amazing,
and it's so great to see all the different styles of the creators.
So I want to know, leave me a comment below, which of the tables is your favorite?
