Hi, welcome to Her Toa Belts. A few years ago,
I made my daughter one of those leaning bookshelves, you know,
that lean against the wall.
I used crates and one by threes and it was a super easy project.
But this past year I've seen her use the middle crate
as a desk and it really isn't big enough to be a desk.
And so I want to rework the project so that it has a
desk bookshelves and a bookshelf with a lower bin,
and it'll be a great leaning system for her room.
The project is really easy uses one by threes for the legs.
It uses a bunch of these weathered crates and a
half wall crate. And then if you're making the desk,
you'll need some wider boards. I'm using some scrap alder.
There's actually going to be three different projects with this system and you
can really make as many of each one as you want and to build
your entire wall system or just one, if you want.
So start off with cutting the legs first.
First I marked the cut points and angles.
These angles on the top of the legs will match the upper corner of the crate.
The ladder legs will be at a 10 degree angle.
Then I'll mark the position of the crates.
They'll also be at the 10 degree angle.
Measuring off each corner of the leg bottom will give me 10 degrees when I
connect the marks. On the crates, I also mark the position of the legs.
You can grab the free plans with all the detailed measurements from my site,
hertoolbelt.com.
I line the backs of the crates up against a straight line, the table edge,
then match up the crate and leg location markings.
Using wood glue and one and a quarter inch brad nails,
I attached the legs to the crates. Totally optional,
but I added a board at the bottom of the legs.
I painted the legs with a white linen chalky paint.
I left the crates with the weathered wood finish.
Moving on to the desk assembly,
I glued my scrap alder boards together for the top and bottom pieces of the
desk. Once the glue dried, I trimmed the boards down to size,
then secured the top and bottom pieces to the desk sides and backs with wood
glue and one and a quarter inch brad nails.
I made a simple slide in pencil drawer.
It's assembly is similar to the desk wood glue and brad nails.
I was hoping to match the desk color to the color of the weathered wood crates.
I found classic gray on the alder was pretty close to a match.
I applied the stain with a chip brush and then wiped off the excess stain with a
paper towel. A clear coat can be applied after the stain is dried.
The modular desk and bookshelves turned out pretty cute and perfect for my
daughter's needs. She has room to store her coloring books, supplies, books,
and display some of her favorite toys.
You can grab the plans for this modular leaning crate ladder
desk and bookshelf on my site, hertoolbelt.com.
I'll leave the link in the description below. Thanks again for watching.
Please subscribe and happy building.