How to Clean Gas Fireplace Glass

Hertoolbelt
34 followers
Quick tutorial to open and clean the inside glass on a gas fireplace.
➽Tutorial:
Modern Farmhouse Mantel - https://www.hertoolbelt.com/modern-farmhouse-mantel-makeover/
➽Materials Used (affiliate):
Cooktop Cleaner and pads https://amzn.to/3mDSzOX
Fireplace Glass Cleaner https://amzn.to/3uwQ9V9
*Cerama Bryte https://amzn.to/3muqppF
*Sprayway Glass Cleaner https://amzn.to/3uF6SWs (from Costco)
*products used
➽FOLLOW ME on Social Media:
Instagram - https://www.instagram.com/hertoolbelt
Facebook - https://www.facebook.com/hertoolbelt
Pinterest - https://www.pinterest.com/hertoolbelt/
#clean #fireplace #fireplaceglass #gasfireplace #cleanglass
Hi, welcome to Her Tool Belt.
Last year I helped my aunt update her fireplace mantle.
But before we got started on the mantle,
she had some maintenance done
on her 30-year-old gas fireplace.
And one of the things that she did
was have the gas fireplace glass replaced.
And I was blown away at the night and day difference
that that new glass made.
It made her fireplace look brand new.
So that got me looking at my dirty fireplace glass
and I noticed I had this white haze all over the inside
and you could barely even see the logs anymore.
Trying to avoid replacing the glass,
I'm gonna clean that haze
and see if I can get it looking new again.
Apparently you're supposed to clean
your fireplace every year.
Maybe it's been 10 years for me.
I'm not admitting to anything.
But we don't actually use it that much.
It's more for decorative and ambiance.
So I guess it could be worse.
My fireplace is a Napoleon GD36 NTR.
But the same general process can be used
on any other gas fireplace.
First I remove the upper louvers
and open the lower louver.
I turn the fireplace knob off and shut off the gas.
If you've had your fireplace on,
make sure you wait till your glass cools
before you try and clean it.
Look for the screen clips.
I have one on the top and one on the bottom.
Others might have two on the top.
My glass swings open like a door.
Other designs might have the glass lift up
and out from the top.
I wipe the dirt from the inside of the glass.
Then I use my glass cooktop cleaner
with a scratch-free pad to remove the white buildup
on the inside of the glass.
I linked some glass cleaner products in the description.
The cleaners need to be scratch-free and ammonia-free.
I buff that glass cleaner onto the glass
using that scratch-free pad
and just kept wiping and wiping
until all of the buildup came off the glass.
After I got the gunk off,
I used ammonia-free glass cleaner to clean it again,
trying to get rid of all of the streaks.
I latched the glass door back in place
and then I cleaned the outside of the glass.
I had a few spots where something has baked
onto the outside of the glass
and so I used the special glass cleaner
with the buffing pad again
to get any of those areas that were hard to get off
with just the plain spray glass cleaner.
Even the spots that were really stuck on
came off pretty quickly with a bit of elbow grease
and the non-scratch pad.
Wow, that little bit of cleaning made a huge difference.
I can see the logs again and all of the white haze is gone.
I reinstalled the louvers.
Now it's time to relight the pilot light.
I turned the gas back on and turned the knob to pilot,
held that down to let the gas flow
and then used the igniter button to light the pilot light
and kept holding the pilot button down
until it got warm enough and then release that.
And as long as the pilot light is still on,
then you can turn the knob to on.
If the pilot light doesn't stay lit,
just repeat the process
but hold the pilot button down longer.
Oh yeah, that fireplace looks so much better
with the clean glass.
The process really wasn't that bad.
Maybe I'll actually do it every year now.
It looks really nice now that it's done.
Good luck cleaning your fireplace glass.
Thanks for watching and please subscribe.
