How To Paint With An Airbrush

Building in Progress
145 followers
Nov 2, 2022
Imagine decorating furniture and crafts, creating custom t-shirts, painting your nails and more.
Now you can try some of these fun and easy painting projects with an airbrush. In this video
we will show you how to use an airbrush to change a simple wooden box into an artistic custom
keepsake. Let's get started. Here are the tools and supplies you will need. Airbrush kit, air
compressor, air hose, fittings, safety glasses, mask if cleaning with solvents, sandpaper if
painting wood, thread sealant tape, bottle of clean water, squeeze bottle or siphon jar, pliers,
small bucket, paper towels, practice board. For the keepsake box project you will need
water-based airbrush ready paint, your choice of colors, wood box, stencils, adhesive spray,
hair dryer for drying paint. Be sure to refer to your owner's manual for detailed instructions.
Be sure your work area is clean and free of dust and debris. Here's how to set up your airbrush.
Remove cap from airbrush. Apply thread sealant tape to male plug to prevent air leaks. Attach male
plug to hose adapter. Tighten with pliers. Connect air hose to hose adapter. Attach airbrush to air
hose. Attach male plug to compressor. Turn compressor on. Adjust pressure to 20 to 30 psi.
Increase pressure as needed. Do not exceed 50 psi. Fill siphon jar with paint. We are using opaque
white airbrush ready paint to cover our keepsake box as a primer. Connect siphon jar to airbrush.
Now you're ready to test out your airbrush. Use a piece of cardboard to practice spraying.
Hold airbrush nozzle about six inches from the cardboard. A steady constant motion will give
you the best results. Start moving the airbrush before pressing the finger lever. Press finger
lever down and pull back slightly to spray paint. The further back you pull the lever the more paint
will come out. Keep moving after releasing finger lever. Here are some tips for keeping your
airbrush clean. First try and flush the airbrush with clean water until paint is gone. Remove the
back blue piece in order to remove the needle. Gently loosen the brass screw around the needle.
Press the trigger down and pull the needle back and forth a few times. Repeat as needed. Also you
want to be sure to keep the hole on the siphon jar lid clear. You may need to use a pin to keep it
open. Now let's paint our keepsake box. Get creative. Use a color and design pattern of your choice.
You can also use stencils to add flair to your design. First use sandpaper to make the surface
rough and remove any pre-applied finish. Next use the airbrush to apply your primer. Start with light
coverage. Use a hair dryer to dry the surface. Apply another coat if needed to achieve desired
coverage. Now you can start your design. Prepare your stencils. They can be made with thick paper.
Spray the back with light adhesive spray. Place them on the box. Paint over the stencil using a
light spray. Dry and repaint if needed. Continue with other stencils and paint colors as desired.
Now you have a customized keepsake box. Always clean your airbrush immediately after use.
Flush the airbrush with clean water until color is gone. Turn off compressor and disconnect air.
Clean needle by removing back blue piece. Loosen brass screw. Remove needle and clean on a paper
towel. Put needle back in place. Put cap back on tip. Store leftover paint in original container.
Clean jar lid with water. Congratulations on designing your keepsake box. We hope you enjoy
using your airbrush for many painting projects. For more information on other air powered projects
visit chpower.com
