How To Rotate Your Tires

Building in Progress
145 followers
30 Video Views·Nov 2, 2022
Ever wonder why you should bother rotating your tires? Well, it can save you money.
Tire rotation evens out the wear of your tires by allowing each tire to serve in as many of
your vehicle's wheel positions as possible. This extends the life of your tires. Plus,
many tire mileage warranties require tire rotation to keep the warranty valid.
Next, you may wonder how often you should rotate your tires.
Most tire companies recommend every 3,000 to 5,000 miles, about the same time as your oil change.
So now you know it's time to rotate your tires, but perhaps you dread the thought of another
trip to the service station. Why not learn how to do it yourself? In this video, we'll walk you
through the process so you can feel confident about how to rotate your tires. Now let's get
started. First, gather the tools and supplies you will need. Air compressor, hose, fittings,
air-powered impact wrench, impact sockets, car jack, four jack stands, torque wrench.
Next, you want to determine the correct rotational pattern for your vehicle. The
Tire and Rim Association has identified traditional rotation patterns covering most
vehicles equipped with non-directional tires and wheels which are the same size and offset.
Be sure to check your vehicle manual for the recommended rotation pattern.
If you have a front wheel drive vehicle, rotate the tires in a forward cross pattern,
figure A, or the alternative X pattern, figure B. If you have a rear wheel or four wheel drive
vehicle, rotate the tires in a rearward cross pattern, figure C, or the alternative X pattern,
figure B. Today's performance tire and wheel trends have provided the need for two additional
tire rotation patterns. The front-to-rear pattern, figure D, may be used for vehicles
equipped with the same size directional wheels and or directional tires. A side-to-side pattern,
figure E, may be used for vehicles equipped with different size non-directional tires and wheels
on the front axle compared to the rear axle. If you have a spare tire that matches your four tires,
you should include the spare in the tire rotation pattern. On front wheel drive cars with full size
matching spare, rotate the tires in a forward cross pattern, figure F. On rear wheel and four
wheel drive cars with full size matching spare, rotate the tires in a rearward cross pattern,
figure G. While you are rotating your tires, it's a good idea to check the air pressure in your spare
tire. Add air pressure as needed. Next, you want to be sure to learn your wheel lug torque
specification. Proper installation requires that the wheel lug torque be set to the recommended
specification for your vehicle. Sometimes these torque specifications can be found in your
vehicle's owner's manual. You may need to refer to your vehicle shop manual or obtain them from
your vehicle dealer service provider. Be careful because if you over torque a wheel, you can strip
a lug nut or hub, stretch or break a stud or bolt, and cause the wheel brake rotor and or brake drum
to distort. When tightening or loosening lugs, you must follow the correct pattern. See figure A.
Now let's walk through the tire rotation process. Step 1. Take out the spare if it matches the
wheels and tires on the vehicle. Step 2. Jack up the vehicle and place it on four jack stands.
You'll jack up all four corners of the vehicle and place a jack stand under each corner. See
owner's manual for correct lift points and jack stand placement. Step 3. Remove the tires using
an impact wrench and impact socket. Remove the wheels and rotate the tires according to the
pattern chosen for your application. Step 4. Put the tires back on the vehicle. Always start your
lug nuts by hand to avoid cross-threading. Snug the lug nuts. Do not over tighten. Step 5.
Lower the car off the jack stands one axle at a time. Step 6. Use a torque wrench and socket
to tighten lug nuts to correct torque. There are many styles of torque wrenches available.
Step 7. Replace spare tire. Now you can save time and money by rotating your own tires.
For more information on air-powered projects, visit us at chpower.com.
