There are many professional products now available to homeowners, and that’s a good thing! “Pro” products typically last longer than consumer-grade items. While a bit more expensive initially, the cost of ownership per year ends up being lower because the product lasts longer!
We’ve had great success with gear-driven sprinklers in our yardscape. There are several brands, but one of our favorites is the Rain Bird® 5000 Pro Rotor. It’s readily available at retailers such as Lowes and Home Depot and is actually just one in the 5000 professional product line. The others are available at commercial irrigation suppliers.
There are several great features for this sprinkler, and you need to understand how they work so you can capitalize on them! We’ll walk you through how to get the most out of this product and others like them. And, you’ll learn about some of the things you need to take into consideration if you are designing, installing, or upgrading your sprinkler system.
If you have a similar product you’d like to mention to other viewers, please comment in the comment section below. If you have tips and techniques that you’d like to share, we’d like to hear them!
Thanks for watching and being a part of our viewer family!
Hey, Dirt Farmer Jay here from DirtFarmerJay.com. We have had great success with gear-driven rotary
sprinklers around our yardscape, but they can be a little bit complex and you got to understand a
few features on them to get the great benefits that they offer. Stay tuned and I'll give you
the insider scoop. Hey, this is Dirt Farmer Jay from DirtFarmerJay.com. Thanks for joining me
today. There are several of the gear-driven rotary sprinklers on the market by such big names as
Orbit, Hunter, Toro, and one of my personal favorites, Rain Bird. These are great devices
and they work really well and Rain Bird is now starting to offer through regular big box locations
like Home Depot, Lowe's, Menards, and others this Pro-Line. Now this is the 5000 Pro-Rotor
Sprinkler from Rain Bird and it is what we use almost exclusively around our yardscape.
It works great, but to get the full benefits you got to understand what it's doing and how it's
doing it. And once you get that down pat, you can really make good use of these great products.
A couple things for you to know. Just the overall length of the unit, this particular one, is seven
inches. So you got to keep that in mind when you are actually installing the infrastructure of your
sprinkler system, all the hard pipe features. So it's seven inches and the pop-up part is going to
come out above the lawn surface four inches. So keep that in mind just in your sprinkler design.
I really like the three-quarter inlet because it gives a maximum amount of water right up to the
sprinkler head. From there it gives you options of whether or not you want to reduce the amount of
the smaller nozzle or diffuser or whatever. When we unscrew the sprinkler mechanism from the
surrounding canister, you can clearly see the integrated water filter right here. And when this
head retracts back in after water pressure is relieved, water is flushed through this as well
as the whole gear mechanism to keep it running cleanly. Now how do these work? Well they're quite
simple in that water comes through here as it flows out the nozzle. It goes through a series of
gears to create rotary direction. Now this type of sprinkler head allows you to go from 40 to 360
degrees of rotation. Now that brings up an interesting point because all of the sprinkler
heads that are all down lined from the same valve are called a zone. And that zone is all going to
run together the same amount of time. So to get each sprinkler head to do its equal share of work,
you only have two variables. One, the distance that that head's going to travel. Number two,
the amount of gallons per minute that are going to come out of the nozzle. So think with me here
for a second. If you have one of these sprinkler heads at a corner where it's spraying off to the
left and it's got to go all the way back around and do three quarters of a circle, then it's going
to take longer and take more water to get that whole arc covered and to get that all saturated.
It'll take more gallons per minute to get the same job done that let's say one of these it's sitting
along a curb and doing a half circle or in a corner and only doing let's say 90 degrees.
So your variable amount of water being delivered happens with the time it takes for it to complete
its cycle as well as the gallons per minute that are coming out of the nozzle. When you purchase
one of these, the standard nozzle that's included is a three gallon per minute nozzle and you will
also get a full set of other nozzles that come along with the unit and with these you can install
all sorts of different delivery rates. So you'll notice if you take a close look at this strip of
nozzles that on the end nearest the handle there are four low angle nozzles and they come in
various capacities and you can see that both on the little indicator buttons that are beside the
nozzles as well as the numbers that are right under each outlet. So in this particular case
you're going to have one, one and a half, two, and three gallons per minute LA meaning low angle
and that helps you to be able to get the water to direct under objects that are overhanging such as
branches or leaves of shrubs. So that allows you to get under those but generally speaking it won't
reach as far. As you go to the right side of the nozzle set you will see that it says rain curtain
and there's a whole set of different nozzles there with their accompanying buttons and for instance
reading across the top you've got a gallon and a half, two, two and a half, three, four, five, six, and
eight gallons per minute but there is no LA with those it's a rain curtain meaning that these are
designed to allow water droplets to land close to the sprinkler head as well as far out. When it comes
time to install the nozzle that you'd like undo this out of the casing in your pre-install
and you would simply pull this out then you're going to grab this ring here the retainer ring
and push on the bottom and now that extends that and you can see the nozzle right in the front there.
Notice I have to hold on both of these because that's a really robust spring. My favorite is what
you see right here and I simply take one of my handy clamps and either in the field turn on the
sprinkler and extend this out and then clamp it or if I'm working right here right now I can do the
same thing I can extend it put the clamp around it and now it's going to stay extended. When it
comes time to remove the nozzle there you're going to need a couple tools. One you'll need a little
standard screwdriver to remove the screw that functions both as the retainer for the nozzle
but also the deflector when you're actually shortening the throw of the sprinkler or
diffusing it a little bit more. The second thing is a little bit unorthodox you'll see right here
that what I'm using is actually a wine opener so this is a corkscrew that you would drive in
to the hole just enough to get a grip in that orifice right there and then you would extract
it back out otherwise you're gonna have to do a lot of digging just be careful a lot of the
workings the pieces in there are plastic so you want to damage them. Now you'll go ahead and
reinstall the new nozzle that you're going to put into this area by driving the screw back down
using your standard screwdriver and then simply estimating how far you want the screw to protrude
down to diffuse or not diffuse at all but it needs to be far enough down that'll hold the nozzle
securely in place. There's one other thing that's very important for you to know and if you don't
get this you're going to be pretty frustrated that is these type of sprinklers always work off the
left edge now why is that really important well that's where they all start and the amount of
variation 40 degrees and greater of the amount of arc all start at that left edge now that means if
you actually set your sprinkler for 360 degrees because it's out in the center of a yard for
instance it is going to start at that left edge and it's going to go 360 degrees around until it
hits that 360 mark but it's not just going to continue to go around it's now going to reverse
and come the other way around and so it goes all the way down to 40 degrees so you want to keep
that mind so how do you know where the left is where there's instructions on here you're simply
going to rotate the head back and forth and you'll feel it hit the left stop now let's suppose you've
got this in the ground and it's really hard to get the left stop to be where it is because where it
is in the gear is over here and if you rotate the whole thing you're going to loosen the sprinkler
well you can undo the top and take out this and keep in mind here that how this works is you'll
see there's teeth on the bottom of this and you can actually hear the gears run here when I did
that now to get that left edge you would simply get it to the left rotate to the left mark where
it is and you can see it because of the little blue indicator on the top and you would now drop
it back into the canister and those ridges there have a matching point down on the bottom of the
canister you would drop it in and then screw it in and what's going to happen is you're going to end
up with it stopped in that one place you notice that even though I'm turning the top or this
retainer the sprinkler head is staying in the same position that's because the teeth down in the
bottom engaged and now you know where your left edge is one other thing that is really important
and that is these type of systems work really well with what's typically called funny pipe
funny pipe is a section of flexible black poly pipe that has fittings on each end this is
typically a 90 degree threaded l that screws right in the bottom of that attached to a short section
of flexible pipe with a male end that screws into a t on your hard line deeper down on the ground
the reason for this is really simple there is a lot of adjustment at the last moment when you're
laying out sprinkler systems the head may tilt it may drop it may be too deep it may be too shallow
funny pipe allows you to dig that out and get it exactly where you need it and get it in place at
the right plane to the lawn at the right angle and so forth funny pipe is available a couple
different ways i know rain bird for instance sells pre-made kits that have both components
on each end ready to screw in so do other manufacturers and you can build your own by
simply buying a roll of the poly pipe and the appropriate fittings and you can build it this way
well this is a great system it's worked really well for us and undoubtedly you our viewers have
some experience on this as well and have some insights to share tips and techniques that made
the job better and have given your sprinkler system great performance won't you take a few
minutes and share that below in the comments below and if you found this video to be helpful
won't you please like it and better yet subscribe to our channel it helps us to put out great videos
about around the home and the garden tips shop kitchen culinary and product reviews hey thanks
for watching today until the next time this is dirt farmer j from dirt farmer j.com