Meat Smoker Build - Vertical w_ Electronic Controls

Rainfall Projects
6 followers
4 Video Views·Oct 29, 2022
My buddy Patrick and I built a barrel smoker a couple of years ago,
a project we kind of just winged and threw together without too much thought.
After smoking a lot of meat on it though, we've been wanting to go back and build a proper smoker
with some new ideas we had. I wanted to do a vertical design so it'd take up less room when
it's being stored and we thought this old stove would work great for the firebox and the base of
the smoker. Pat and I have been BFFs since the third grade and now that he lives an hour away
Portland, one of the ways we keep the bromance alive is by blocking off an occasional weekend
down here on the farm to work on our project together, which is really just an excuse for
us to hang out and have a couple beers. We'll maybe squeeze in a little welding if it works out.
I hacked off the upper part of the stove so we can get a better look at it and cleaned up the
welded on tabs on the inside. Then we measured and drew straight cut lines and Pat jumped on
the plasma. Pat's brother-in-law Tim offered to help out on the smoker as well. All right Tim,
walk us through what's going to happen. So basically what you got going on here...
A meat thermometer? Yeah, a meat thermometer is basically just a variable resistance device.
There's a thermistor. And it's going to control the fan? Hopefully. A little controller there
will watch the temperature and if the temperature gets too low, kick the fan in, stoke the fire.
That's all contingent on me understanding floating variables.
You don't understand floating variables? I don't right now. Would another beer help? No, well maybe.
Tim's an electrical engineer and had some awesome ideas on electronic controls,
which I knew nothing about and is all gibberish to me, even floating variables. But I do know how
to get the CNC plasma table loaded up and cutting, so I focused on cutting a new top for the stove
while Pat finished up trimming it flat. It's such a prominent Cheez-It product placement.
Mmm, delicious Cheez-It. Tim was working hard on his boat horn alarm,
which he said would alert, slash, wake up the smoke master when the meat is done. It's not
working. I see that. You got to turn the volume up on the horn. Oh, it wasn't supposed to stay on.
Wake up! Meat's done. I got the top welded on. If the sparks are coming out to the side,
you're not, you're going too fast and it's not going all the way through. Lastly, I gave Tim
a crash course on the plasma and he cut out the side vents before we called it for the night.
It's already got smoke in there. Breaking it in, that's all. Yeah. Pat and Tim plan to be back out
next morning to keep the work party rolling. But first, a quick word about the sponsor of this
video, Trade Coffee. I love my coffee. Being a farmer over the years, I've fought off my personal
instincts and forced myself through sheer will and to be in an early riser. I've learned the
thing that helps me the most with getting out of bed at 5 a.m. every morning is knowing that
there's a good cup of coffee in the kitchen waiting for me. Trade has partnered with 50
of the best roasters and offers over 400 coffees. A quick two-minute quiz matches your coffee taste
preferences and brewing methods with the perfect brew. It's the freshest cup of coffee you'll ever
taste and it's shipped directly to your door. The thing I really like about Trade is their roasters
put a lot of work into ethically sourcing their beans and ensuring their supply chain is one that
gets money back to the farmers that grow the beans. That's something I can definitely support.
And the pricing is seriously the best part. You won't find a better deal for coffee of this quality.
Trade is giving the first 100 people who click the link below 30% off their first coffee.
Just click the link in the description below and use my code RAINFALL for the freshest and
most personalized cup of coffee you'll have no matter how you choose to brew it.
Thanks Trade. The next morning we jumped in on cutting the pieces for the smoke box
which we would be building from scratch. I was hoping to keep all the sides attached with fold
lines in one flat piece but couldn't quite fit all that on the sheet of metal so I had to cut two of
the sides detached. All right here goes nothing. It's hard knowing how long of a tabs to leave it.
I'd say you nailed it. That one I was nervous about it bending like across here but...
We tacked all the pieces together and then fully welded each seam.
Boring. I knew there needed to be some kind of lip around the base of the door to seal against
so I cut some angle that we could weld on around the outside.
Pat and Tim drilled holes in them that I could plug weld since I couldn't weld to the base
because it would keep the door from sitting flush against it. The last thing we wanted to work on
before the Portlanders had to head back home was the racks on the inside. Tim was cutting,
Pat was drilling, and I was welding. I had a nice assembly line going. I had a lot of fun
working with Pat and Tim. They're coming back down to the farm in a couple weeks
to smoke some meat for the Halloween party and I told them I'd get the smoker finished up by then
and Tim said he should have firmware version 2.1.16.1332 ready for release by then as well.
I cut some brackets I could mount caster wheels to. This thing is only getting heavier
and Pat and I could barely move it when we started.
I cut fold lines in these also but the quarter inch plate was still too hard to bend
without some heat. I wanted the brackets to flare out a bit to widen the base as much as possible.
We weren't sure if we would need it but we decided to cut some raised grate for the fire to sit on
that we thought might allow more airflow to get in under the fire. They were removable so we
thought we could decide later on whether to use them or not. I welded some legs on the underside
of the smoke box to keep it raised off the top of the stove and not allow any radiant heat through
and I forgot to set the brake on the casters making things difficult
but I got the smoke box positioned over the stove and welded on. The last thing I wanted to try and
get done for the weekend were the two side vents. I cut the vent shape on the plasma table and then
bent and fit the front and back pieces to enclose them. I ground the weld smooth and then carefully
positioned the vents over the vent holes before lastly realizing I forgot the ground clamp.
I wanted to do something more than just a flat door. I thought it should be dressed up with some
kind of design and Pat had the idea to cut out a fir tree. The inner scrap pieces even look pretty
cool. I think I'll be keeping them for something. I got the tree cut out aligned with the backing
piece and plug welded them together. The door was getting heavy and I asked Kelly to help me clamp
it in place. You're caught on that thing right there. I forgot the dang caster brakes again.
I'm always nervous I'm gonna weld on the hinges upside down and the door will crash to the ground
when I unclamp it which I think I've done before. I bulged the frame around the tree inward where I
wanted the hinges and latches to go to help me keep things lined up and to give it a little bit
more strength around the hinges. Got the hinges on the right way. I moved on to the smokestack
at the top which I put a little swoop in the bottom of and I bent and welded a vent cover for
the top. We wondered if the vent cover might restrict the airflow so I made it removable.
My one little regret on the design of the smoker is flaring the lip for the door
outward instead of inward. It hides the hard work I put into the vents and smokestack a little bit.
It's not a big deal though. Originally I flared them outward thinking I could put some vise
grips around the outside of the door if it was leaking too much when it was closed.
I used 3 16th inch stainless round bar to make the grates for the inside that the meat will sit on.
We'll have some adjustment of the racks depending on what we're smoking. The part I kept putting off
until the very end here is the latches which took me a while to figure out how I wanted to do them.
The outward flared lip complicated this a little bit more too. I cut some brackets out of 3 8th
inch plate and heated up and bent the top of them so the handle would angle outward.
I set the tension on the nuts so it was snug but still turned easily
and then tightened a second jam nut against it to keep it from loosening.
I positioned the catch in place and pulled it backward as tight as I could while I welded it.
The latches worked better than I thought they would. They really held the door closed tightly.
I suddenly realized that this project didn't have any rebar incorporated into its design yet
so I fixed that by using a chunk of rebar for handles. Always got to have a little bit of rebar.
The last thing I needed to do to get the smoker ready for some fire and meat
was mount a thermometer to the front of the door. I cut an unfortunately galvanized coupler in half
and welded it to the door. That's all I could find around here. There's a couple things I'd like to
still do to the smoker eventually like build some folding shelves on the side and build a box to
house Tim's electronics. But it was time to get this thing going. Pat showed up with two briskets
and trimmed all the fat back to an even layer about half an inch thick across the top and
seasoned them with salt and pepper. I also threw together a quick fan mount that bolted to the vent
opening on the front of the stove. Tim said we should definitely do something not permanent that
can be changed back if his electronic controls didn't work as planned. Tim got everything mounted
to a board complete with buttons to raise and lower both the meat temp alarm and the grill temp
which controls the fan. I was at the end of a very long day working on getting the barn ready for the
party the next day and I knew I wasn't going to make it much longer but Pat said he's ready to
stay up all night keeping the smoker going. The briskets were officially on the smoker at 12 45 a.m.
My head was officially on the pillow at 12 50. The fan controller worked incredibly well
maintaining the temperature in the smoker. It really had a lot of control over the fire.
Pat said he pretty much immediately unplugged the horn though. I think Tim might have a couple
bugs to work out on it. Pat also said he stayed nice and close to the smoker. Yeah it was a cold
night. He gave the meat a squirt of water every now and then to keep it moist. He was keeping the
temperature of the smoker around 275 degrees and he's going to smoke the meat until it got up to
about 200. But he also said he goes by feeling and the meat should be tender. I'm not sure what that
means. You'll have to ask him. Oh wait. I think it'll be fine. Yeah all the doors. Yeah that's awesome.
So then you're wrapping it and then you put it back into the higher temperature to cook it?
Same temperature. Okay. So it's pretty dark in color. It's pretty much all we want. So this will just...
After seven hours he thought they had gotten plenty of smoke and wrapped the meat in butcher
paper so they could cook another hour to finish off without the smoke. Oh Drake thinks it smells good.
And they came off the smoker about an hour later and went into an insulated cooler to stay warm
until the party later that day. I guess Pat knew what he's doing because the meat was incredible
and the two giant briskets were nearly gone by the end of the night.
It had a ton of flavor. It was really moist and went down a big hit for sure. I see a lot more
smoke meat in our future. Especially if I get brave enough to try my hand at running it.
Or maybe I should just stick to welding. Lastly I just wanted to thank Trade Coffee once again
for their support. And don't forget to click the link in the description to get 30% off your first
bag of coffee. All right now what else can I smoke in this thing? Are there any other holidays that
revolve around cooking large pieces of meat coming up?
