How To Fix A Leaking Washing Machine Kenmore 80 Series DIY

Finger Family
30 followers
4 Video Views·Oct 28, 2022
This is where I got my pump. It worked great! It's actually a Whirlpool pump because they made these machines for Kenmore. The part # on mine was 3363394. You will want to check yours and make sure it the same thing. This same dis-assembly and assembly will probably work similar for other makes and models but this is specifically for Kenmore 80 Series. I hope this can be of help to others and same you a lot of money doing this yourself. If I saved you a lot of money on repairs would you consider donating to my channel so I can keep making repair videos? Check out the donate button in the "about" section of my channel. Thanks.
It's the Kenmore 80 series as you can see there and what I had trouble with, what I
wanted to do this video about to help you guys out is on the front it was
leaking and my wife and I got this the other day. We just bought this machine
used and so I decided to turn to it myself and figure out what's going on
and it's really an easy fix. It's for the washer pump. So I'd like to just do a
quick video here. First of all I would recommend unplugging the electricity.
I would recommend turning off the valve. Some of you will have a valve here and a
valve here. Otherwise there's not really anything necessary to unhook. So excuse
the shaking. I'm just kind of doing this here in my own place. So first of all
what you will need is a Phillips screwdriver and my fingers there.
So up here in the top corner there's a screw to take loose and you can just
take these right out. So there's one on either side and then on the front here
you have these caps. See if I can get this to focus again. Here we go. You can just pull up on
this tops and they pop off like that. Pull up on this one and it'll pop off. And then there
would be two screws here. I already loosened these ones for the purpose of
the video. So what I would like to show you next if at all possible is
pull up and you can just swing it out over and let it hang there.
So the next step is this connector here. You will want to unplug it just like
that and get a flat screwdriver. You can see and all you have to do is
insert in this spot here and pry up. Now these can come right out. You set it over
in my pile. Same thing just really easy. Just pop it right in here. Pop it out. So
that's all for that. So now just take and pull up on the whole thing. Slide it
backwards. It comes right out. Then next we will get a close-up view on our pump.
That is what we are looking at right there that pump. So let's go on to the
next. So the next step guys is you want to take like a vice grip. I already did
this top one here but all you need to do is put a vice grip on that and clamp it.
The vice grip wire pliers will do and just work it over like that and release it.
So now that these are loose all we need to do and be careful because there
could be some water going here. Just like that. Which fortunately for me I have a
drain here and take the lower one loose as well and again watch out for the
water. You may want to have a little can or something ready if you don't have a
drain handy. So in the last step now this pump will come off easy because this one
I just replaced and I've had it on here for a couple weeks and I wanted to show
you that it works really well. So what you do and I would probably
recommend doing this with a screwdriver or something but I just wanted to show
you how easy these can come off. You can just pick off and pick up and do it by
hand like this. Just get your finger underneath it and it'll pop loose and
they're just back in there on the slot so you can take and turn and they'll
come right out if you need to. Now this pump is basically just on it just
slides on here so all you need to do is just wiggle it back and forth and there
it is. Now that's all that's to it there's four pegs on like that and
basically when I did mine this shaft here was really rusty but what I did is
I filed it down carefully to original size put some oil on it and WD-40 I
believe and it moved right up. Now basically to reassemble you just have
to make sure that these hoses here kind of stay out of the way. I do apologize I'm
kind of doing this as I have my hands full. So basically you can see all that
just make sure that this this pulley in the middle here is turned the right way
because it can it can it's only slotted on it's only flat on two sides so you
need to turn that the right way before you can slide this on. So that is the
main thing and so now basically just put this clip back in and get it in that
slot in the back there and turn it and then you know it is there you can just
slide it over that this bottom one if I can show it here on the camera just goes
in the hole in there in the same same way and sorry I got it started there it
just clips on exactly the same and now this this upper hose I do apologize I
wish I had my hands free to do this. You have to work it a little bit sometimes
these hoses like to fold under it's handy to have a flat screwdriver to very
carefully pry that around and same for the little one and then remember that
vice grip you had just keep the vice grip handy and do that with it now this
upper clamp is a little bigger so you have to open your vice grip a little bit
bigger and there you go so that's how easy it is to change that pump. Now I have to
warn you that the new pump the I mean the old pump that you take off is going
to come off a lot harder because well there's a chance that it is mine did is
what I'm saying because it was really rusty so okay so to reassemble make sure
that it's underneath in here and what I want to show you here is this part in
here make sure that that's pushed in all the way as you're trying to make it
come down and make sure that it's lined up down here same with both ways this is
put in properly now what we want to do so before this is tipped down we need to
insert these clips like this bring them and push them down in you can also use a
screwdriver for that I would say now remember your wire clips sorry I don't
have a more professional way to show this on the camera this way you can see
that I'm doing it in real time most part okay this thing was just giving me a
little bit of fit so now remember to put your screws back in here
to show you that I do mess up I'm just an everyday guy doing this and now don't
forget these plastic clips for in here both sides make sure that it lines up
with the hole in this plastic part here and now last but not least mine have
been taken apart before by somebody else so they don't fit exactly perfect so
just be careful when you're doing yours it's easier to put the bottom in first
and then don't forget in the end of course plug it in turn your water back
on in my case it's just one of these where I can just pull it forward your
case you might have one down here and one here like I was saying you have to
turn them open and that should have it if you're interested in finding the part
I find mine on Amazon they were like under 10 bucks I'll put the link in the
video description and good luck hope that helps sorry for the shaky camera
and everything but like I said I was trying to do it while hanging on to the
camera and everything so I hope it helps like some of these videos helped me
