DIY Drill Powered Lathe

Finger Family
30 followers
13 Video Views·Oct 27, 2022
Hey everybody, I'm Tommy and this is the One Minute Workbench
Micro Shop. It's designed to give you all of the essential features of a workshop
without compromising on performance in an incredibly compact collapsible and portable
package. Whether this is your first time here or even if you've been here before,
welcome to One Minute Workbench. If you're a maker who lives in a tiny house, a van,
on a boat, or let's say you're a traveling handyman, or you're just short on space
for any reason whatsoever, then this is the shop for you. It includes a table saw, a router table,
a jigsaw table, a nine inch disc sander, a drill press, and an oversized miter gauge
that mitigates the need for a miter saw. It also rests on large non-slip rubber feet,
which make it incredibly stable on a variety of surfaces. As you can see here on these saw
horses, it's just rock solid. It's built around handheld power tools that can be inexpensively
purchased at Harbor Freight. A benefit of using these tools is how readily available they are,
and how inexpensive they are if it ever becomes necessary to replace one of them.
One of the coolest things about the Micro Shop is that you don't need a table saw in order to
build it. It's designed to be built without using a table saw, miter saw, or a drill press.
This entire project can be built with just the tools that go into it, one extra hand drill,
and a few smaller hand tools, like a hand saw, some chisels, and some files. In fact,
I built this one right here without using my table saw, drill press, or miter saw,
and I have a complete series of videos, build videos, that show exactly how I did that.
I'll add links to those build videos down in the description section. It's been cleverly designed
so that all of the accessories set up and tear down quickly, and all of them fit inside the
main compartment, keeping the footprint of the unit very small. It's also been designed so that
the tools, for the most part, are not in the way of each other. The table saw and router table are
designed to be used from one side of the unit, while the jigsaw table and disc sander are designed
to be used from the other side of the unit. If you do need to add or remove a tool's accessories,
because they're all mounted with knobs, they can be added or removed in just a few seconds without
needing any tools to do so. The table saw has a cutting depth of one and five-eighths of an inch.
This allows you to cut standard two-by material, like two-by-fours and two-by-sixes,
and it has a removable throat plate that can be exchanged for other ones,
which gives you full range of the circular saw's angle cutting abilities. The fence is incredibly
smooth, very strong, and very accurate. Accurate to a little better than a 64th of an inch.
There's an extended material support arm that will allow you to support much larger pieces
of material, and a miter gauge is about four times the size of a normal miter gauge.
When used in conjunction with the support arm, this allows you to make cross cuts that you'd
only be able to make with a miter saw or a large table saw sled. There's also a board splitter,
which helps reduce the chances of kickback. It's an important safety feature that's missing on most
DIY table saw designs. And all of the tools have safety switches, so there's no way they
can be turned on by accident, and they're very easy to shut off. The drill press gives you a
4-inch swing, a 3-inch drilling depth, and you have about 8 inches of height adjustability
to allow for drilling materials of different thicknesses.
The drill press is lever operated, and it has a very smooth action,
and a very strong spring return. I can only really think of two downsides to the Micro Shop.
Number one, including the tools that go into it, this build will cost you somewhere between 400
and 450 dollars. It's a lot of money if you think about it as a single project. However,
if you consider the value it gives you, it's actually a really good deal. There's probably
no other way you could get this much functionality for under 500 dollars, and there's certainly no
way you could get this much functionality in a package this small and portable for under 500
dollars. And number two, it doesn't have any dust collection. I could have added dust collection if
I had made the package a few inches bigger in kind of all three directions. However, my goal
for this project was to make it as portable as possible, as compact and portable as possible.
So for this version, I've opted to leave the dust collection out. Although I haven't gotten to it
yet, there's one more major feature I'm going to add to the Micro Shop, and that is I'm going to
build a container for it that will double as a bench when it's not in use. And when it comes
time to use it, the bench will double as a base for the Micro Shop so that you don't need saw
horses or any other type of supports. If you want to build one of these for yourself, I offer plans
for sale on my website. The plans include a complete shopping list with part numbers and
provide step-by-step instructions in very great detail. And again, the plans will show you how to
build this even if you don't already own a table saw, miter saw, or drill press. Hey, thanks for
watching. I really hope you enjoyed this video. If you haven't already, be sure to like and
subscribe, and make sure you hit the bell icon so you get notified every time there's a new episode.
I'd love to hear what you think of this Micro Shop in the comments section below,
and if you have any quick questions you want answered, hit me up on Instagram,
Facebook, or Twitter. And until the next time I see you, I hope you have fun building something.
