DIY Macrame Hanging Planter Tutorial (for beginners)

You can do it
18 followers
74 Video Views·Oct 24, 2022
Hi guys, welcome back to my channel.
If it's your first time here, hi, I'm Emily, I'm so glad you're here.
Today I'm going to make for you a macrame plant hanger.
This was requested and I actually haven't made one, which is surprising because I've
been making macrame a ton.
This will be my first time making a macrame plant hanger for you.
I'm going to try and keep it really basic for any beginners.
I am going to do my best to not complicate things and just have it so kind of anybody
can make this.
So let's get started.
For supplies, you're going to need a pair of scissors, a gold, this is just a gold ring,
but really any sort of hoop or loop.
I got this in a pack from the dollar store.
I know you can also buy very cute wooden ones from Amazon.
Maybe I'll try and find some and link those below, but I'm sure Michael's or any craft
store would have something.
And then this is a cotton clothesline.
This is what I use.
I buy it from Home Depot and you should only need one package and they're about $5.99 for
one package.
The first thing you're going to do is cut and measure six 13 feet long pieces of cord.
So I have already done that.
Once I measure out one, I just use that as my base to measure out the others.
Next, you're going to take each cord and fold it in half and you're going to loop from the
back with the hole and you put the two cords or you put the cord through and you pull it
tight.
Okay, so once it's folded in half, you pull it through, open the circle and pull through.
My plan is to do a slightly different style plant hanger.
It's still going to be really easy, but it's not maybe your typical style, but I've seen
this one and I think it's really cute.
Let me show you guys a little drawing, terrible drawing skills, of the plan and hopefully
it makes sense.
This is the plan.
So it's almost like a little mini wall hanging that then goes down into the plant hanger
part, which is hard to draw, but I wanted to give you guys a good idea of what I'm doing
at the top.
So this is actually going to be flat and then it kind of goes out into the three spots for
the plant hanger.
So I'm only going to be using the square knot and it is in both of my macrame videos, but
I'm going to teach you guys again, just if you're new here, then you don't have to go
back and rewatch anything.
You're going to work in groupings of four.
You're going to take the far end, kind of create this nice four shape, take the other
far end, lift it over top and then under everything and pull it through the little loop and then
pull tight.
Then you're going to start on the opposite side.
So you kind of create that same four, go over top again and then under everything through
the loop and pull through.
And that is your square knot that we're going to do throughout this entire video.
So keep working in your groupings of four, always start in the same direction and just
watch this a few times and you guys should get a hang of it.
The next step is going to be to leave out two strings on the end and you're going to
work with the two ends.
So you're combining.
So we're going to work with these four and these four and we're going to leave out these
two.
There's that.
And then the last step is going to be to leave out all of them except the four in the middle
and that is how we have created a nice little triangle.
We're now going to continue on and create the, to create the diamond shape in the middle.
Now we start again to create the two.
So in order to do this, we're going to work with these four again.
So you're leaving out the two on the ends and working back with these four.
And our other step is now we're going to do the full three across.
I will now just be repeating the exact process that I did up here.
So I have the three, I'm going to leave out the two on the ends and then eventually just
do the four in the middle for the last one.
I completed the diamond.
I'm basically now going to create again another half just like I did before.
So I move back to working with these four and these four just like before.
So I think you guys should pretty much understand how it's working.
That is what it's looking like so far.
And technically that's all my picture had, but clearly my picture was now drawn to scale.
So I still love this pattern.
So I'm basically going to continue, create another diamond and kind of work my way until
I feel like it's kind of long enough.
So I'll give you an update when I'm there.
And that is what I ended up doing.
I did end it in a diamond.
I thought I was going to just end it flat, but I ended up liking the way it looked better
like that.
So the next step, and we're almost done, I guess, is we're going to take, separate them
back into their original like groupings, the three groupings of four, and we are going
to give quite a bit of length because this is where the plant will kind of sit.
So I don't even know, what do we say, like a foot down?
And we're going to do three square knots.
I'll show you.
You have tied the three square knots about a foot down, and this is kind of the confusing
part slash the part that will be important for you to understand.
So basically the two knots on the end, so these four strings, they are kind of, think
one is going to go to the back.
So if you kind of think about it, there is a plant that's going to sit in here like this.
So essentially how it's going to work is that these two are going to be tied together with
these two.
And I'll do it one at a time for you guys, but these two are going to tie together these
two.
And then same thing with those back ones.
So there's that square knot, and again remember this is the end two and the two cords that
connect.
Does that make sense?
I'm terrible at describing, but I hope you guys can see.
Okay, so then the next step is this end cord is going to connect with the middle, these
two right here.
So I'm going to tie it and then try and show you.
I ended up connecting those two and then the end with the other middle two.
I hope that makes sense.
I hope you guys can see how I did that.
I'll try and give you like a full shot.
That middle one, that middle one went to the back.
I feel like once you put the middle one to the back, it kind of makes better sense.
Okay.
And then the last step that I'm going to do is, I don't know, another few inches lower.
We're going to basically do a big knot right here.
Actually what I'm going to do for the end, just a few more inches down, I have some little
leftover kind of string type cord, but you can just use this like if you have any extra.
And I tied a knot, I'm going to tie it a double knot.
And then I'm basically going to wrap all this excess.
And that's what it looks like.
And I'm just going to cut off the little excess fringe.
The last step, I guess I have some extra.
I could have made it a little bit longer, but I would rather have a little extra to
cut than have made it too short.
I cut off the excess.
And now to put the plant in for the big reveal.
One last thing before I show you guys the big reveal.
I wanted to say that this is a bit of a shorter plant hanger only because I live in a basement
suite and I have really short ceilings.
If you're somebody who has really, really tall ceilings, you are going to want to make
your plant hanger a lot longer.
I mean, maybe by like two feet longer.
So that means extending each cord longer and obviously continuing the pattern longer.
I hope that makes sense.
Here is the finished product.
I am so happy with how it turned out and it was way easier than I ever thought it would be.
I hope you guys liked today's video.
If you did, feel free to give this video a thumbs up.
As always, you guys can subscribe.
I hope you have a great day and I'll see you next time.
Bye!
