How To: Macra-Weave Tutorial

You can do it
18 followers
7 Video Views·Oct 24, 2022
Hi everybody! Welcome back to my channel. If you guys are new here, I'm Emily. I love macramé,
thrifting, and of course a good DIY project. Today I have your love overdue
macra weave tutorial. So this is a combination of macramé and weaving and
you guys have asked me how I do it, so it's finally here. Before I jump into
anything, if you guys aren't already, feel free to follow me on Instagram at
emilyfave22. Let's not waste any more time and let's get into this thing.
There's so much to say about macra weave and I guess just everything, so in some
ways this will be a more in-depth tutorial, but if you haven't, you do need
to go watch my three basic macramé knot tutorial. That's gonna give you guys the
basics because I'm gonna be teaching you guys some other new things. I'm not gonna
go over that stuff, so I'll link that video down below for you. Another thing
you guys always ask me is what macramé cord do I use? There are so many options
out there. You guys can just google macramé cord and see what comes up. If
there's anything near you, you can check on Amazon. I can link some Amazon stuff
below. For today's project I am going to be using this giant spool. I got this in
bulk. You guys would not need to buy this much and I won't be using all of this.
I can link that one down below if you guys want to check it out. You can buy it
in smaller amounts. You don't have to buy it that big and that's five millimeter,
which is a little fat. The next thing you guys need to know is that you're gonna
need some sort of wooden dowel or a stick. In the past I have used something
like this. This is just some driftwood, but I didn't want to go with that sort
of look today, so I went with a wooden dowel. Lately I've had quite a few
people asking me what size my wooden dowel is and honestly I don't, I don't
know. Like is that like an inch? I don't know. I don't know. It's the size of my thumb
pretty much. You definitely don't pick one that's like wobbly. This one's like
really sturdy, so if one is like super skinny, you'll know because it'll be
wobbly. So anyways, just pick out. It can be whatever size you want. Thicker, just
maybe not super, super thin. And I didn't measure, but my guess would be that that
wooden dowel is probably just shy of two feet or maybe right around two feet
long. I think we're ready to begin the fun part. You guys are going to cut 18
strings and they're each going to be right around 11 feet. Then you're going
to fold them in half and loop them on to the wooden dowel. This is just a clothing
rack for anyone wondering and I just have these hooks. If you don't have that
you can just tie a string to it and like tack it to the wall or something like
that. For this project you are also going to need some yarn. Now I have used some
of this yarn, so that's why it's in baggies. This one I got off of Amazon and
it was way too expensive and I didn't even know that you could get them from
Michaels, so I actually love this one. Like it's a beautiful kind of creamy tan
color, so I can link this below, but it was definitely expensive. I got it months
and months ago and I never used it, but you can buy ones like this from Michaels
and you can use a coupon, so this is definitely more affordable. So you guys
should probably just check out Michaels for some like really fat chunky yarn and
then of course at Michaels you can also just get some like fatter stuff like
this. I'm not sure which one I'm going to use, but we'll find out at the end. I think
we're finally actually truly ready to begin making some knots. I'm going to be
taking this other cord I have. This is totally unnecessary. You guys can use the
cord like you guys just use the same cord, but I'm going to be using this
cord because it's a thinner cord. Again, this is totally unnecessary. I'm just
choosing to do this. What you're going to do is take your cord and we are going to tie a
double half hitch knot straight across. We're going to make a line. Instead of using
this cord, which I've done in some past videos, and you can do this, but you
basically take your cord and pull it to the side and tie a double half hitch.
Instead of doing that, I'm going to basically add a full separate cord. The
reason I'm choosing to do this, just using a separate cord altogether, is
because it eliminates the problem later on of having a few cords to be really
short and I hate running into that problem. So we're going to add in a cord
and I will show you guys how to hide it at the back when we're done.
Once you have your full line straight here of the double half hitch, we do have
this extra string hanging over because obviously we added in this piece of
string. So how we hide that at the back is you are going to need some tape. Mine's
clearly almost gone and I like to tape off my ends. I wrapped some tape around
it. I choose this one because it's obviously the same color but you can use
washi tape or whatever and then I'm going to cut it. So I've gone ahead and
flipped my wooden dowel over to the back. So this is what it looks like from the
back and I have taped both sides and cut them short. So what you're going to do,
actually this is pretty short, you guys might want to leave them a little longer.
I didn't even really look. What you're going to do is skip over this first
little loop but go to the second one and we're going to tuck it under. The same
thing on this side. You skip this but we're going to tuck it under this one.
That's what it will look like. It's looped at the back just like that right
through. When you flip it back around it should look like this. Your strings are
hidden at the back. We're going to do some square knots right up at the top.
You guys should know how to do your square knots if you're watching this
video. So let's get going with those. I do want to do three rows of square knots
and to do another row you guys know that we leave out the two strings on the end
and combine our groupings of square knots and then we are going to go ahead
and do a third row. Now that we have our three lines of square knots what we're
going to do and I don't want to be confusing but there really isn't an
exact science to this and we're going to kind of create a curved wavy line and so
what I'm going to do with a few of my square knots I think I'm gonna make some
of them longer. They'll arch up and then go down so then these ones are longer.
That's all I ended up doing. I added these square knots and these two right
here and again it doesn't need to be an exact science we're just kind of going
to create a curved line. Let's grab another spare piece of cord and we are
going to create another line of our double half hitch just like we did up
top only this time we are going to curve it to the shape of our square knots so
it's going to be a curved line. Now we have our wavy line I hope that
made sense and if you guys want you can skip the part where you make it wavy
it's totally fine to have a straight across line it'll still work perfectly
so if you guys are like this wavy thing is so confusing don't do it just keep it
straight across line with three rows of square knots and it'll totally still
for now. I do need to go and tuck in my cord so I'm not going to show you guys
that again because it's the same process every time. Next what I'm going to do is
add another row of double half hitch and leave these empty because once we
complete our full macrame design is when we go back and add in our weaving. I just
added this second line and I tried to curve it almost so like it was a mirror
image to this one I'm just going to tuck these at the back. Now I'm going to add
another string and I'm just gonna pick a spot maybe just making sure that I could
still do groupings of four so here we go right here and we're just going to kind
of do a little curve like this. Now that we finished this little thing we do tuck
in our strings so it just tucks in right to that second one just as if it was on
the end that'll tuck right back there and the same on the end. Now what I'm
going to do is do some more square knots but I'm gonna start them over here and
kind of I'm not sure but kind of do them like cross like this so I guess we'll
just watch together. We're going to do another line of the double half hitch
this one's a little bit more straight across. Add another sort of line across
again I might create a little bit of imperfection in it to kind of mirror
this one. Just finished up that next line and what we're gonna do is make one tiny
little kind of slit peekaboo kind of like this one but right here just a
little one and then we're gonna do square knots and one final straight line.
So when you do the little when you do the little splits make sure that you
work in the groupings of four so that it doesn't get messed up over here so I'm
just taking two groupings of four and starting on this side with my double
half hitch. This is what the bottom looks like you can see I've only tied like
half a square knot here I guess I could tie one here it's a little bit going up
I was trying to get as straight of a line as possible. Now that we have fully
finished our macrame design all I need to do and I'll wait till the end is cut
off the bottom. This is the part where we begin weaving now I just wanted to
preface this with a few things. I really don't know much about weaving at all I
don't know the name of any sort of like knots or the way people tie stuff like I
don't know. You guys could go look up your own sort of weaving tutorials because all
we're going to do is use these lines as if they were a loom with the threads
going up and down so anywhere where there's a gap like this we can weave in
between. So that's why I said earlier that it doesn't matter if it's curvy or
straight across you could have just done nice straight across lines and it would
be the same. You can weave anywhere where you have gaps like this. What we're going to
start with is this big bundle of yarn that I got on Amazon but again Michaels
is probably going to be your best bet but I can link this down below and what
I like to do is cut off a good amount but you do need to like cut off a chunk
so like this is what I got and what I did was tape my ends because this stuff
is super super fragile so if you pull it too hard it rips all that so I like to
tape my ends it's just easier to work with that way. So we're gonna start up
here and this one kind of looks like a braid so we're just gonna call it like a
braid weaving and I'm sure people are gonna comment below what it's actually
called and that's good. First thing we do we're gonna work with groups of two is
put an end piece through put it down to the side like this down to the side then
we loop this over the top and we're gonna take our next two strings and loop
this entire bundle behind and through it.
Okay so did you guys see that we pulled that whole bundle through there and then
it looks like that so we wrapped it around that second one pulled it through
and now we just keep going so you loop so now you take the next two loop it
behind and then we're going to slowly feed it through okay and then it will
start to get to the end and it'll look like this where it's going that way you
just loop it to the other side so it's starting to look like that and then we
take our next two strings behind pull it this way once you've pulled it all
the way you cross it over take your next two. Once you get to the end we have our
two strings left we do our last one the same. Tuck it behind pull it through so
and it would look just like that going that way so I do because we're gonna go
back the other way and actually I'm not sure I do this part right but you know I
make it work. I go like that so I just tucked it behind and through and then
you start going the opposite way so you tuck it behind that side and you can see
that some of my stuff came apart just from pulling through because it is so
fragile. Apparently I got really lucky this time and measured my yarn like
perfectly and I actually didn't measure I just I don't know how to measure that
much so what happens if you run out is all you do is add more and I tape it and
then I kind of like put it up back and then just pull the new pieces through so
that might happen to me later and I can show you guys then but to finish this
off we are going to tuck it behind the last one and down through I barely had
enough but I think I can make it work and then this one I'm also gonna put it
at the back so what we do is you can see right here is the one and I just
like to take a piece of tape and you can literally like pick one of these things
maybe right here and like tuck it into it I guess I don't need this piece of
tape so I tuck it behind it so there's one and here's that end piece I might
bring it up here and tuck it behind this one or something and then it's all
secured but that is what it looks like and you can see it definitely kind of
looks like a braid I think what I'm going to do is take this yarn that I
have it's more of like a normal size yarn except it's a little thicker still
so it's not as thin as some we'll start with this much I'm gonna do is fill in
this area we're not gonna be using the same technique this technique is much
easier okay so I taped off my ends and now all you do you know what I might
start on this side because it's gonna be a little easier you basically weave in
and out like simply like that so this is like a very typical like back and forth
back and forth that makes sense and I do pull all the way through as I go
otherwise it gets harder and harder to pull the string through just go back and
forth back and forth and we'll probably go up at this top part one time and then
we'll skip it at the back the next time and then what I like to do is slightly
pull everything out a little bit and we just weave our way back and like this
area is really basically full already so if we want I can just come in the next
spot that it's not full like that it needs it cuz right there is fine so I
kind of can start right here if that makes sense and now you're gonna go
opposite so I went behind this string or I went behind this string now when I
poked it through I'm going to go over that string and pulling it through
there's multiple ways to do this one way that I kind of do sometimes is like take
a section like this and just weave this section fully and then I'll skip over
and weave this section this section full okay now that I filled up this spot what
I'm gonna do is just put it behind and not weave until I poke through right
here and then I can just and that's okay they'll just be a like a tighter string
at the back and then you can just so just make sure that wherever you poke
through it's like the opposite way of whatever was done last I finished and
you can see I just have these spare pieces so I am just going to kind of
leave them in here this is that loose string I was talking about earlier yeah
here is what the top looks like all finished thought about putting this one
right here I went in and added this chunky yarn with the same sort of knot I
did up there it just looks a little different because it was such a little
skinny spot and I need to tuck that in at the back what I'm going to do now is
in this whole section I'm going to add little fringe like this I've cut a whole
little handful of these cords and I don't know they're like a few inches
they don't need to be long to create these little tassels what you do is you
take two of the strings you put it in front loop it behind to the back and
pull and pull the string the two strings through the middle just like
that and I'll cut them later and also fray them I'll show you again I'm in
front of the two strings and then loop them behind behind and then pull the two
strings through just like that for the next layer I'm gonna alternate the two
strings just so that I don't get the gaps the whole way up I did a few layers
alternating the strings every time and now I'm just going to fill in this part
with that cream yarn that I used up here to finish off I am going to take this
string which is the one I used up here in here and fill in this entire section
I just wanted to keep it minimal since I have like this going on this going on
and this going on I thought I'd just keep that section pretty minimal you
guys can see right here I ran out of cord all you do if this happens is get
some more cord we're going to tape them together so I've taped it when it's
hanging at the back like this we're going to keep weaving through but we
don't pull it tight we make sure that there's this extra piece hanging right
here to finish off we are going to take a straight line and then cut right
across and then fray our edges I decided to create a slight V I just wanted to
show you guys what the back looks like so I have like a piece tucked in here I
have a knot tied here got this string which I don't have to leave like that
but doesn't bother me I guess I could like cut it cut it and tuck it but it's
fine I have some pieces hidden here so yeah I'm just gonna I have that tucked
in tucked in so that's what it looks like if anybody's wondering I hope you
guys enjoyed today's video if you did feel free to give it a thumbs up as
always you guys can subscribe thumbs up yeah for more of my everyday life
feel free to follow me on instagram at Emily faith 22 I hope you guys have a
great day and I will see you next time
