DIY Macrame Ideas | Easy to follow tutorial | Wall Hanging & Yoga Mat Strap

Bohemian Decorate
25 followers
28 Video Views·Feb 25, 2023
Hello everyone, my name is Angelica and welcome to my channel. I haven't done any macrame projects
for a while so for today's video I'm coming to you with three new ideas. Apart from home
decoration I will also make an item which you might find very handy if you are more into sports
and yoga. And if you are new to macrame technique I will highly recommend watching my other videos
where I teach basic macrame knots step by step and also share a few tips and tricks how to make
the whole process easier. I will leave the links to those videos down below and now without any
further ado let's get right into the first project. To create this project you can use
any size of the wood frame. Mine measures 22 x 27 centimeters so if yours is different you will
have to adjust the length and amount of cords. I will be using four quite big hooks with screw.
You can buy the new ones, I found these ones in my partner's toolbox. I just give them a clean
and spray paint them. You of course can put as many hooks as you like. I'm going with four and
at first I measure what distance I will have to keep between each one. I make sure that points
are visible and straight in line before I drill the holes. I'm looking for the right size of drill
bit which is slightly smaller than the hook thickness so it will stay secured and tight
once screwed in. And using power tool I'm making four holes. Make sure they are deep enough for
your screw. Meanwhile I wrap the ends of the hooks and give them a spray paint with gold color.
For this macrame design I will be using three millimeters thick macrame cord and I cut pieces
each 200 centimeters long. I fold first piece in half and attach it to the top of my frame with
lark's head knot. I go from the outside of the frame and pull the cords through the loop.
And I repeat the process until the frame top is covered. So for the design I'm going for I need
14 cords. There is room to fit more of them but to fulfill the design I would need to add
additional four cords and it would just look too crowded. I spread the cords evenly on the frame.
Let's start the pattern. I take first four loose cords and create square knot. In this video I will
try to show you the step slowly as I found explaining macrame more confusing than it really
is. Then I take next four loose cords and create another square knot. First row is done. I have two
square knots followed by two loose cords, then two square knots, two loose cords and again two
square knots. Taking the first loose cord I start creating double half hitch knot going diagonally
downwards to the right. Before I continue with this knot I quickly make another square knot which
sits between two middle ones. And then carry on with double half hitch knot on both sides.
Triangle shape is done. Let's fill the rest of the space with square knots.
Going lower I take two cords from adjacent knots and create new one.
Going level lower I start from further cords creating triangle shape out of square
knots. I take the first loose cord and start creating the edge around my triangle. I do it
twice and on both sides. Once this is done I continue with my square knots. Each knot is
made out of two cords from previous knot and two new loose cords.
Going lower I start with the same cords making the edge of the design straight. So my camera decided
to stop recording without letting me know. I finish the whole design by creating five rows
of square knots and finish it all with diagonal double half hitch knot. Then I push the cord to
the inside of the frame and glue it to its back. You can staple it if you want. I just use hot glue
which work just fine. And then I trim the spurred cord pieces. Now it's time to attach the hooks.
After spraying them with the first coat I've decided that they will be better off standing
while drying. So I've made holes in the egg carton and push them in. They are all dry now so I can
remove the tape and screw them in. You can hang your jewelry on it but it will look really nice.
Next the entry doors with hanging keys so no more looking for lost keys.
To create this wall hanging I will be using wooden dowel and five millimeter thick cotton cord.
I want first part to drop down about 15 centimeters so I cut 30 centimeters long piece.
And all together I cut five pieces in this length. This wall hanging will contain seven
individual pieces so I have to make sure all of them will fit on this dowel. And to wrap
my loose cord I'm going for pink two millimeter thick cord. Thicker one would work even better
but that's what I already had at home. I cut quite long piece of it and fold it in half.
I put its middle part at the back of my white cords and start creating square
knots. I make sure that pink cord is tight and all the way up to the dowel.
And I continue this process all the way down. White cords are playing the role of untouched
middle cord and the pink cord is the working one. As you can see the square knots create
really nice pattern on the sides. Once I finish with the wrapping I flip it over and make double
knot at the back to secure it. Because I'm using macrame rope I have to untwist all of it. If you
are using macrame cord you can brush it off straight away. I have to unravel it first and
then I can brush it. First part is done. Let's create another one. I will follow the same process
just with the longer rope. The first pink part is about four and a half centimeters long so I want
my second one to be twice that. And the same I cut five same length pieces and now I wrap them all
with my pink cord. I would recommend finding better position to do this project. Off camera I was
holding the stick between my knees so the this way it didn't move and the wrapping was much easier.
Third part will be the longest one. Pink part will be three times longer than the first one.
When you run out of the colored cord don't worry. Simply tie it at the back and then
add new piece. From the front you won't notice that there was anything added.
And if you forgot which side you were making the knot last time look at the small loops on the side.
If there is loop on the left that means the next one you will create will start with the loop on
the left and cord from the right going through. I hope you know what I mean. So this is the whole
design. I will just follow the same process and create seven individual parts. Once they are all
wrapped I unravel all the loose cords and brush them. Because the rope is very curly and fluffy
I took my hair straightener and straighten all the brushed cords. Once they look more elegant
and presentable I trim them so the ends are nice and straight. Like most macrame projects it was
quite easy but a very time-consuming process. If you decide using thicker colored cord the process
might be much quicker. Not only the core piece but also cute and practical macrame item. To create
yoga mat strap I will need two wooden rings and two pieces of cord each one 12 meters long.
This time I'm going with five millimeters macrame cord. I take each cord piece fold it in half and
attach to the ring with lark's head knot. This way I've created four loose working cords. Again make
yourself comfortable you can hang the ring from the wall or secure it on your desk. Once you've
learned how to make square knot this project will be super easy as it's made only from this type of
knot. Because the cords are so long it takes a while to pull its whole length through the loop.
I don't tighten it too hard as I want my strap to have the same thickness all the way and be quite
wide. I recommend gathering the long pieces of the cord together as it makes the process much quicker.
First part is ready and measures 90 centimeters long. I'm in the middle of my strap and what I'm
going to do now is swapping the working cords. So far two middle cords were just hanging down
so they are still really long when the two cords from the sides are getting shorter because they
were wrapping the other cords. So by swapping them I will still have plenty of the working cord
and I will be able to continue the design. Now going from the middle I have two 90 centimeters
long straps. One end already has the ring I only have to pull the strap through this ring creating
loop for the yoga mat. And to attach the second ring I pull the macrame strap through it, pull it
higher up and then pull the strap through it again. I take one cord from each side, wrap it around the
bigger strap and create square knot to secure. This way I've attached the ring to the strap and
created another loop for the yoga mat. You can cut off the excess cord or add some unique touch
and decorations to your strap. Push the rolled mat through the loops and you are good to go.
Like always let me know in the comment section which project was your favorite and also let me
know what other macrame creations would you like to see me doing. And don't forget to check in my
macrame playlist which contains plenty of unique macrame projects. I will leave the link to it
down below. And if you enjoyed today's video make sure to give it a thumb up and subscribe to my
channel. And for now thank you so much for watching, your support and I will see you in my next video!
