Prehistoric Nettle Textiles: part two, update on progress

How2 made easy
39 followers
8 Video Views·Oct 23, 2022
Hello, I'm Sally Pointer. Interest in prehistoric textiles is at an all-time high at the moment
and it's becoming more apparent as more research is published that although many
surviving textile examples are in cultivated flax, people certainly hadn't stopped using
wild resources as well. How early yarns and fabrics might have been produced is something
that's fascinated me for years and I'm often found demonstrating possible prehistoric textile
techniques at heritage sites right across Britain where I use many materials including flax and
nettle. Today though I want to explore some of the recent research into textile techniques
using one of my very favourite plants, the stinging nettle. So I'm out in the glorious
Herefordshire countryside collecting nettles and this video will look at processing them
in ways that hopefully would have been familiar in the Neolithic or Early Bronze Age.
For many decades it was assumed that draft spinning was an essential part of early textile production
usually also assuming that plant fibres like flax would be retted and beaten
and combed much as they are today before spinning. Now in this shot I'm working with wool but the
basic principle is the same, prepared fibres getting drawn out and twisted with a spindle to
make a thread but it's been obvious to textile archaeologists for a long time that textiles
including some early woven ones date back far beyond the point where spindle whorls are common
finds so what is going on? To a point this is explained by the idea that cordage comes first
by a great many thousand years. Here I'm making cordage out of nettle fibres that have been peeled
but not scraped in any way so all of the green bark is still on them and the end result is a
two ply structure which is not unlike a spun and then plied yarn. At some point those spindles do
start to play a part and textile production becomes more widespread. Now this is all very well
but as an archaeologist we want to research to help prove, disprove or to expand on what we think
we know. In 2018 Margarita Glieber and Susanna Harris published a remarkable paper
I'm going to put a link to it in the description of this video, I do recommend it
and I want to thank them for making it both open access and under a creative commons license which
means that people like me can use it when teaching. In this paper they re-examine many of the most
important neolithic and early bronze age European bast fibre textiles and demonstrate conclusively
that they're produced by splicing and not by spinning. Now this isn't always easy to understand
without seeing it in action so this video will look at how we can turn stinging nettles into
yarn suitable for weaving using splicing methods and tools broadly consistent with this time period
and it sows a huge amount to the paper I've just mentioned. Now we don't know exactly how our
prehistoric ancestors were processing their nettles but I'm going to try and do my little
experiment today using materials that are at least consistent with the technology they've got
so I've picked my nettles, didn't bother with gloves, don't usually need to as long as you're
careful, I'm going to split them open and I'm just going to use a little bit of wood to do this
to break all the way along but it is a bit faster in this instance split the nettle
all the way down its centre part. Now the important parts of the nettle here are the
bark on the outside this green bit now the fibres lay within that but on the inside there's this
pithy woody part you need to break that away so usually that's just a case bending back
snapping it off sometimes it comes off more easily than others today I think this one's
going to be awkward it's because it knows I'm filming it usually once you get them started
though it peels away quite quite nicely we're snapping periodically so you don't leave the best
bits behind. Now in modern day use I'll quite often use a blank table knife to do the next part
but again we want to keep it within the realms of what might be correct for period in question so
I've got some flint tools here these are just flint flakes a friend of ours has very kindly
provided me with I'm going to try this it's got a slightly flattish slightly serrated edge to it
and what I need to do is scrape away as much of the green part as I can to leave the white
fibres behind I'm going to try it on a board first the flint might not be flat enough for that
working quite well every flint's different so sometimes you have to try
different ones to get one that's comfortable in your hand I like this one even better
I'll just do a little bit of this to show you I do have other videos on
pairing metal fibres if you're not quite getting enough visuals here but can you see
the fibres are starting to show through I just need to keep scraping until we've got as much
of the green off as possible leaving as much of the fibre behind that's coming up really really
nicely you should be able to see that that's separating into its contingent part really very
well flints are amazingly good tools there are some styles of flint that they believe have been
knaps and shaped especially for fibre processing these are just flakes that happen to be
a comfortable shape and they're working really very well for me now there's a fine line with
processing if I scrape too hard you see a lot of my fibres have come away with it so that's okay
I'll just sort those out put them back into my bundle always a compromise we want to get
fibre that's fairly clean but with enough of the the green left now the green's got pectin and
other gums in it and that's going to help hold these strands together for the splicing part
just be a bit careful around the around the knots where the leaf joins
quite often the fibres will want to break at that point but we just want to keep
the strands as long as we can without getting lumps and bumps now that I think will do for
my purposes so from that nettle we've ended up with a slightly green ribbon that will split down
into lots and lots of thin strands but I want to split it up into as many thin bits as I can at
this stage because that helps make sure that I haven't got lumpy bits at the leaf joints but
what I'll do now is I'll process a few more I'll take these home and I'll hang them to dry before
do the next stage and after about 10 minutes work five nettles have turned into this bundle
of certainly imperfect but scraped enough fibre now we're going to take these home dry them out
and we should be able to go on to the next part of our prehistoric nettle splicing experiment
and after probably 10 minutes work this is what we've got this is the fibre from five
nettles and as you can see I've left plenty of the green on there just to hold the strips together
but at the same time those white fibres are clearly showing through now I'm going to put
those to dry this is some that was dried yesterday that's 10 nettles worth so together I'm going to
have the fibre of 15 nettles for this little experiment we'll give that a few hours possibly
overnight to dry and then we'll go on to stage two these nettles have dried out properly now
this was the fibre from 15 nettles which yesterday I peeled and I scraped quite roughly
using a flint flake and as you can see the fibres are separating out quite nicely but they're still
quite stiff there's a certain amount of green on them I can see little knots where the leaf
joints were so I'm going to soften them up a little bit more before I start I'm just going
to rub them between my palms quite vigorously now it's a little hard to see on the video but
there is quite a lot of dust coming off that's little tiny flakes of bark and woody material
just coming away but you can probably see it on the table there and it's amazing how much
cleaning up you can do just by this sort of friction and this is something that could have
been done much later in the year if necessary it's very hard to know for certain but I can
quite imagine our earlier ancestors harvesting the nettles at their peak and then saving the
final processing until whatever was burningly important at that time of year was out of the way
there are some bits of the year where there really isn't that much to do apart from stay in stay dry
stay warm and I think textile processing is something that works quite well at that point
look at the mess goodness as well as rubbing between my hands I can also make use of flints
I've got a fine serrated edge now these are well known archaeologically they don't necessarily
look exactly like these ones but extensive experimentation by several researchers has
demonstrated that using them to process things like nettles or flax or other plant materials
will result in a gloss on the edge of the flints which is seen on the original ones so we think
it's highly likely that people are processing fibers using flint tools now what's happening
when I do this is that the very very rough fluffy bits and the very very short fibers
are coming away and again it's softening things it's removing any little impurities that I've
left behind it's just refining things remember for this particular experiment I don't want to
get down to utterly clean stripped fibers I want some of this bark to remain so I'm just going to
do this just until I'm satisfied that the very very worst of the knots and lumps have been got
out of the way and this waste material can be used for stuffing things I could make it into coarse
cordage it's quite good fire lighters I'll periodically go back to softening and rubbing
between my hands I reckon for this bundle 10 minutes work will be about right to get this
ready for my next stage show you a closer look at some of the flints I said these aren't exact
replicas of known ones they're just really flakes that have had the edges touched very very slightly
to give them a slight serration for me they're working very very nicely indeed
so let's get on to the fun bit so for this experiment we're very much working with this
diagram from the Glieber and Harris article what I'm going to try and do is extract this and stick
it up in the corner of the video if I'm clever enough what I'm also going to do is rotate it
so that it matches the direction that I tend to work in so just to recap the purpose of the
experiment in this video is to try out both of these splicing methods this one's continuous
splicing this one's end-to-end splicing and as with all of these things there's always more than
one way of achieving the same result so we'll try a couple of different methods and we'll try
throughout to keep the finished thread thin enough to be used for eventual weaving so we're not aiming
for chunky cordage like I normally demonstrate you want thin thread that can be used in weaving
projects so first up is continuous splicing and this is essentially cordage now this little bit
of nettle fiber I've very very briefly dampened I think just moistening in the mouth would have
worked just as well and we want to be working for this with really just one of the strips
at a time more or less or perhaps one of the bit strips because I want to be adding some in
trying to keep it nice nice and thin so generally the principle with this is just as I've
demonstrated with cordage many times in other videos you twist and you cross you twist and you
cross you twist and you cross you twist and you cross if you were left-handed it would be twist
down cross up twist down twist down cross up so it's exactly the same end result regardless of
which hand you work in now the diagram shows that when you need new parts you're adding them in
along the sides and there are two schools of thought with this the diagram shows and
it's a little early to add up I'm going to do it anyway a nice thin end it shows the
adding on the side and it overlaps and I'm going to need one for the other side
let's have another little thin bit there's a little thin bit
and you would just add bits on the side as you need them now this certainly works
but it does have an issue and can you see the issue is that you get little frilly bits
sticking out now that may or may not be a problem quite often in use those little bits will just
break away but they can also represent a weak spot because they're not bound in it's possible
so the way I often recommend when I'm teaching cordage making is just put that down for a second
and separate off another very thin bit now I'm conscious because I'm trying to demonstrate this
all in one go I'm actually adding fibers rather more often than I usually would so normally I
wouldn't bother adding a new fiber until I'm really quite a long way into the into the trailing
ends so I am getting a little bit thicker as I go however we'll just get the the technique
bits out of the way so first way with continuous splicing is to just add lying along the side
but personally I tend to teach people to take a tiny tiny whisper fiber and to lay it more or
less from the midpoint right across both bundles out of the way right across both bundles so that
as soon as you start twisting it in it's completely secure and there are no bits to fall out now
somebody pulled me up on this in one of my cordage videos and said oh that's a terrible idea because
if you lay it in at the equal point you're going to run out on both sides at the same time and
I do take that point however I don't think it's as drastic as all that because although I say
roughly at the midpoint actually it's never exactly even what you tend to find and they're
now my longest ends if I go down to the far end but even with roughly halfway oh can you see this
at all this is so thin this fiber one bit is still carrying on for a long bit way and the other one
has tailed off rather earlier so even though I lay in roughly at the midpoint it's never
exactly halfway the other thing and this is probably more important if we try and look at
both ends of one of these strips of fiber you tend to find that one end is a little bit thicker
than the other we'll ignore that bit because it's got bark on it right that's better can you actually
see that at all gosh is thin this stuff one end is just a little bit fatter than the other because
of the way it's been peeled off the off the bark so yeah it is a perfectly valid comment that that
particular person made that you don't want all your ends to finish at the same stage but I think
it's not really an issue now the important bit about continuous splicing is that your finished
thread is finished you've got two strands that have been twisted and bound together and the
end result is is a cord it looks very very much like a modern piece of yarn when it's done and
I can certainly make that thin enough to weave with but you're always going to see that strongly
plied structure all the way throughout the the finished piece you're not really going to see
where you've added in new bits or not because they happen so continuously this pretty much
represents the earliest forms we think we think cordage comes a long time before
weaving originates and whilst there's a huge overlap this sort of cord making probably does
belong to a slightly earlier tradition so that's the first version and two ways of doing it so
either lay in little by little bit on one side bit on the other or lay it around watching out for
too many ends overlapping definitely works you can make this infinitely long so make a bit
wind it up onto a stick finger in this case make a little ball of it and the end result is something
that makes very very beautiful very stable very very strong thread perfect for sewing thread
perfect for robust things okay the other one though is the end-to-end splicing and that's what
is starting to show up a lot more in the actual archaeological textiles now in exactly the same
way that with continuous splicing there were a couple of different ways to get the same results
with end-to-end splicing you have exactly the same thing and this is the slightly trickier
technique and this is the one that a lot of people have trouble visualizing until they see it
now you can see just how fine this little strip of the nettle is but you can also see particularly
on this bit that there's plenty of green holding it together now end-to-end splicing is going to
join just these ends so we're going to end up with a little bit of twist here but most of it isn't
going to be twisted at all and this actually is where licking the ends really comes into their own
good thing i'm doing this off screen so with end-to-end splicing you overlap sufficient
and generally it's enough just to get the two thin bits overlapping and you just give them a really
really really good twist so i've got a bit here with a twist but most of the body hasn't now
there is an immediate downside if i give this a pull well actually that's not bad at all but it
could slip so it is going to rely on being plied together with the second piece in a moment i'll
do one more on the end of this bit just to make sure i am aware that it's really actually quite
hard to see the ends of these so i've got two little frilly ends i'm just going to give them
a quick lip saliva does actually have enzymes in it that can help activate the plant gums
overlap the ends give it a really good twist now you can probably see you quite quickly get
into a tangle doing this so the trick is if i go back to my original starting point
to wind it up as you go make yourself a little a little ball of the stuff
of course it's going to start very tiddly but it will get bigger so there's my very first splice
about to go in and actually i'm pretty pleased with how that's holding it wouldn't take huge
amounts of stress but it's certainly holding together for light tugging so i'll just wind that
up until i get near the end then i'd splice in another bit and keep going that's that's absolutely
fine so this second way of doing this is very similar but it has a slight refinement
again one thin frilly end another thin frilly end i'm just giving a quick lick
now with this variation on end to end splicing rather than overlapping them one against the
other and twisting i'm going to put them side by side see that's better over my hand isn't it
give that section a twist quite a strong twist and then fold it back and twist it into the body
of the material now this one is even stronger
now both of these methods have been identified on early textiles the really important thing
about end-to-end splicing is that the main part is that even nearly in focus
has almost no twist in it at all it might pick up just the tiniest bit from the um from the
splice just just expanding down a bit so there's no twist at all in this section
when you get to the bit with the splice in it there's actually quite a lot of twist
at that stage now this is as i said stronger than it looks but you wouldn't put the tension
of a loom under this so what you have to do with spliced material i'm just unwinding
some of my little bundle i've just made is you need to take two strands of it
now look you can already see how those spliced ends are starting to go a bit frilly and start
to slip there just a little bit and you need to put two strands next to each other so the splices
do not sit next to each other and then you put a twist into the whole thing that's where the
spindle starts coming in use although it's perfectly possible for me to do that by hand
wind it onto my stick or into a little ball twist a bit more yeah so at all isn't necessary
but it would help what you're going to get here is something that for the bulk of it
you can see it's got a twist but it doesn't look plied and it's only when you get to the bit
where the splice appears that probably is really hard to see on the screen i'll try and put some
close-ups in if i can work out how to do the technical stuff uh it's only where the the splice
appears that it will actually look plied this is what is turning up over and over and over again
in the archaeological material and this now should be strong enough to weave with so my job now
is to make some more of this i'm going to concentrate on this method we know the cordage
works we know that the version that looks like very very thin cord is stable it's been around
for thousands and thousands and thousands of years no issues there at all this is the one
i'm going to make quite a lot more of in fact i'm going to make two balls of it and then i'm going
to use my spindle just to speed up the plying and hopefully the end result will be enough thread
for me to set up a very small project on a loom and we'll see how the end result looks
and with obligatory background cat noises just to prove it's one of my videos
here's my attempt at a close-up of the finished samples so this is the continuous splicing
essentially cordage the technique that virtually everybody watching this will be quite familiar
with this is the end-to-end splicing now it's a little harder to point out what's going on
but you can see here a splice where it looks plied and in the rest of the body of the section
where a splice isn't next to it it just looks twiddled together there's another splice here
the section of fiber next to it really doesn't look as if there's much twist in it at all
so i had originally planned to show you some of the i had originally planned not to have a cat
sitting in front of my work hello tesla um oh dear the plan had been to show plying of the spliced
fibers at the very end of this but given that the cast decided that it's time for me to stop
and he's probably right i'll save that for the next video there will be another one won't be
immediately straight away i've got a little bit of things to do first but i'm going to finish up
this and rather more nettle and i will apply it together and then we'll have another video where
we look at the effects of plying on a spliced fiber and what happens when we weave it and then
what happens when we wash it beetle it generally abuse it all the things we can do to it to get
rid of the remaining bark and give us a really soft workable textile bye for now
