I bought 2 junkyard engines for the MR2 and S 2000

MatriX
43 followers
5 Video Views·Oct 21, 2022
Earlier this year, while at the racetrack, the 1ZZ in my MR2 failed.
Pretty catastrophically.
I think that might be it for the old 1ZZ.
But while everyone was coming up and expressing their condolences for my loss, I had a big
smile on my face.
If I was concerned about driving my car, then yeah, this was bad, but from a YouTube perspective,
this was what I'd been waiting for.
Finally, we could get rid of the gutless 107 wheel horsepower 1.8 liter and move on to
the swap I'd been waiting for for almost a year.
Around the same time this year, I picked up a dream car of mine.
A Honda S2000.
Or I guess I could say, the shell of an S2000.
I bought it without any engine, transmission, a beaten up body, and a missing interior.
A fixer upper, for sure.
I don't intend for this S2000 to become another car that I strip out and modify to be fast
at the racetrack.
I want to learn what it takes to bring a vehicle from track car to livable street car.
With everything focused around the driver and the driving experience.
Including the engine.
And now finally we have here in my garage, two engines for my two poor, neglected, abused
convertible twins.
These two cars have had kind of a weirdly similar trajectory up until this point, but
now their paths are going to diverge pretty significantly.
Let's talk about the MR2 first.
Now when we're talking about the third gen MR2, the Spyder, the main issue that we face
is the engine.
The 1ZZ makes all of 107 horsepower and is just absolutely gutless.
So often people will try and fix that problem by doing an engine swap.
The most common of which would be the 2ZZ.
This is also a Toyota engine, 1.8 liters, but it makes 50-60 more horsepower and has
a lot more RPM to play with.
What I consider the downside of this engine is that it seems like a lot of investment
for only 180 crank horsepower.
And if you want to make more power than that, you're kind of already at the limit of the
motor.
Now, the more ambitious swap would be a Honda K-Series.
This is a very famous engine swap, of course, and you can make absolutely as much power
as you want to with it, with a huge aftermarket.
But unfortunately, because this swap is so ubiquitous, it's also kind of played out.
And there just seems to be something weird about putting a Honda engine into a Toyota.
If only Toyota made their own version of the K-Series.
Well, as it turns out, they do.
Kind of.
This is a Toyota 2AR motor, and this really is Toyota's answer to the K-Series.
This motor is found in just about everything, including the Camry, the RAV4, the Avalon,
Scion TC, some Lexuses.
This one actually literally came out of a Camry.
And like the K24, this is right about two and a half liters, and because they put these
motors in absolutely everything, they're pretty affordable.
This one costs right about $1,800, but this is not just any 2AR engine, this is a 2AR-FXE.
Came out of not just a Camry, but a Camry Hybrid.
So the 2AR-FXE is the 2AR equivalent that is usually paired with hybrid cars.
And this motor is a little bit different from the standard 2AR-FE, in that it has a higher
compression of 12.5 to 1 compared to the non-hybrid motor's 10.4 to 1.
It is an Atkinson cycle motor, which means that it sacrifices performance in order to
get more fuel efficiency, which means that while the standard 2AR-FE in, say, a RAV4
or a Scion TC would get 180 brake horsepower, as much as a 2ZZ, the 2AR-FXE will only make
about 150.
So this is a pitiful little 150 brake horsepower motor, making all of that power through only
variable valve timing on the intake cam.
But we can take all of those tricks that Toyota used to get this motor to be super fuel efficient,
tweak them slightly, and then we will make a lot more horsepower.
So all we've got to do is take the intake cam on the 2AR-FXE, advance it one tooth,
and we've basically got a hot cam, because this engine has a lot of valve overlap.
Then we're going to take another intake cam from the FXE, put it where the exhaust cam
is currently, we will have dual VVT, and then we will be able to make upwards of 240 wheel
horsepower.
It's been done before, with a nice flat power band.
The 2AR is still very much a Camry engine, it's not going to ride with the moon and it's
going to sound like a blender.
However, when we are done with it, this 2AR is going to be a very powerful Toyota solution
to the MR2 problem.
Although, if you're sad that we're not going to have a low-displacement, high-revving motor,
may I direct your attention to the S2000?
While the 2AR MR2 is more of just proof that Toyota can make a competent motorsports engine,
the S2000, on the other hand, is just supposed to be a driver-focused passion project, which
is why I went and got the most intoxicating K-Series I could possibly get, and that is
this.
This is a K20A3 out of an RSX.
Somebody say K-Series?
Hey, Ben.
You've done it!
You've finally done it!
Yeah, I got a K-Series.
So you came over just to see this, huh?
Yeah, oh, you probably want to change this out for like an EP3 tensioner there.
Yeah, I guess.
Okay, you got a steel oil pan on here, that's nice.
Yeah.
They usually come in aluminum pans and they crack, so that's a nice little touch there.
Yeah, maybe you call next time before you come over.
K20A3, is that what this is?
Yeah, I believe so.
RSX.
Yeah, yeah, yeah.
That's a good base to start with.
Yeah.
Well, I was thinking I could just put this in because...
No, no, I mean, you want a lot more power than that.
These things only make like 160.
Oh, okay.
Yeah.
So let's see.
Well, you're gonna start with the bottom end here.
We can take it apart and put some pistons in.
Well, I don't know if I...
I mean, I only paid 500 bucks for this thing.
Well, the compression ratio on these aren't super high, so you're gonna want to pump it
up a little bit.
So we're gonna do like some like high compression pistons in there.
How much do you think that's gonna cost?
Kind of the appeal was that this was gonna be really cheap.
Yeah, but these things have so much potential.
Like the ceiling is so high, you really don't want to do that in there.
And then if you're gonna rev it out higher, you're gonna want a Type S oil pump.
What does that cost?
It's really not that much.
Actually, a bunch of companies make some kits for it.
So we're gonna do a Type S oil pump and...
But this head is like good and stuff, right?
Yeah.
No, I mean, these are...
I don't think they're a three-lobe cam.
If you just take a look in the oil thing here, you can see if it's a three-lobe cam.
Okay, you can?
I don't think it's got that like real VTEC in it.
This is like IVTEC or something.
Okay.
So generally, you'll want to change this out for like a K20Z3 head.
Okay.
That's out of an 8th Gen Civic Si.
I've got one here that I brought for you.
Oh.
Just out of my inventory.
So we'll put that on.
Where did you get this?
Oh, I just had it laying around.
You can pay me back.
It'll be all right.
Oh, good.
Yeah, okay.
This is the hot setup.
This is what I ran two years ago before it was illegal in the new class that I ran.
Because it's so good.
Okay, this head flows more.
So yeah, then you'll probably change the cams out on here.
I mean, these cams are pretty good.
You get some dry cartel cams in here with some valve springs.
You will get this thing to really rev out.
You could probably get like 10,000 RPM.
10,000?
Can you imagine in an S2000, 10,000 RPM screaming?
That would be sick.
It does sound expensive though.
I mean, it's really not that bad.
Because there's so much aftermarket out there for these cars.
Yeah.
It'll be no problem.
And with higher compression pistons, type S oil pump, and some cams, different head.
Yeah.
You can even leave stock S2000 trans.
Trans should hold it.
I mean, that's what I've got in my FD.
Okay.
So I was planning on the S2000 trans at least.
Yeah, yeah, yeah.
So the driving experience is going to be so like pure, so raw, so like high revving.
And because this is a rear wheel drive, you usually have to change out the intake manifold.
The RSX intake manifold is crappy.
Then generally you go to the Civic Si manifold, which came with these,
but can't do that in a rear wheel drive.
Okay.
So you can swap on there a like a Kamiata manifold.
That sounds good.
Or a Skunk 2 manifold or something like that.
But if you put ITBs on here, can you imagine how that would sound?
I can't imagine what it would cost.
Screaming at 10,000 RPM.
Yeah.
How much money do you think we're up to at this point?
I mean, like 10, 15 grand.
10 or 15 grand.
Yeah.
I mean, when you think about how much like a brand new type R costs or something,
it's really not that bad.
I mean, how much did these cost brand new?
You know?
Yeah.
I mean, I guess, but I wasn't paying.
Okay.
Yeah.
This is, you're going to love it.
Okay.
Way better than that.
Well, I mean that, the whole motors and trans setup costs like four or five grand total.
Yeah.
I mean, you could do this cheap too.
You can just drop it in there.
But like once you do all this stuff, trust me, you are going to be singing praises.
And anytime you're going to walk out here into this garage,
and when you pick between one of these cars to drive, it will be this one.
Did I have that on there?
Oh, we got to put the cams on there.
Maybe you'll just, yeah.
I got to find some funding for all of this.
I guess I'm paying Ben back for this head.
Oh, you can do a fluid damper too.
Man, he's sure excited.
So, you know, I don't want to rain on his parade.
It's just nice to see him, you know, really worked up about something.
Definitely want that EP3 pulley.
Give us a couple of months to do these builds, guys.
We've got a bunch of other Gridlife content, Evo content, Civic content.
Oh, you got a little works out there.
Guys, yeah.
Thanks for watching.
I'm sorry.
