Full shop tour of Fat Fender Garage with Garrett from American Muscle HD. We walk through every arm of the business — from our in-house upholstery and interior kit operation to our brand new chassis manufacturing facility, wiring harness development, paint booth, parts R&D, and some of the trucks currently in the shop.
Garrett's been following FFG for years but this is his first time stepping foot in the facility, and the reaction was pretty much what you'd expect — he had no idea how many things we do under one roof. We're not just a build shop. We design and manufacture our own chassis through Fat Fender Chassis Company, build complete interior kits that ship nationwide, develop our own wiring harnesses for Coyote and Godzilla swaps, do all paint and body in-house, and hand-build wood beds. It's a lot of arms, and we cover all of them in this one.
Jason also gets into how our wiring harness program came together — the problem with inconsistency across builds, why we decided to engineer a complete system in-house, and where the product line is headed. The 67-72 Ford harness just launched and you can check it out here: fatfender.com/products/1967-1972-ford-wire-harness
We also walk through a few current builds, including a patina Revival Series truck with a Coyote swap, a long bed running a Whipple supercharger and Godzilla motor, and the early stages of what's shaping up to be the largest project in FFG history — a highly customized 1956 Ford. And yeah, we take a '72 bumpside out at the end to show Garrett what these trucks actually feel like on the road.
Shop our full line of classic truck interior kits: fatfender.com/pages/premium-interior-kits-for-classic-trucks
Learn more about Fat Fender Chassis: fatfender.com/pages/ffgchassis
Follow along with more builds and shop updates on Instagram @fatfendergarage and TikTok @fatfenderaz.
Hey guys, we are here on another shop tour, but we are here with a special guest, Coyote
Motor.
But yeah, that would be very unsuspecting.
I knew you guys built trucks, but I didn't know the full scope of what you guys do.
I was like, why is this place so big?
The guys were like, well, these aren't DOT compliant.
We either had to just stop doing chassis or go all in.
Go all in.
I smoked out that intersection one time.
Probably the largest project we've ever done in the history of Fat Bender Garage.
We've got Garrett here with American Muscle HD, and we're going to give them a tour.
All right.
We've got Garrett.
Garrett, tell us about, you know, there's people that watch us that probably don't know
who you are.
I don't know if that's possible, but there's a lot of people that follow you on Instagram,
but tell us who you are for those that may not know and what it is you do and all that
kind of stuff.
Yeah.
So I run American Muscle HD on Instagram, TikTok, whatever.
I've been doing it for a long time.
You said, what, 2017?
2013.
13.
Okay.
So that's a long time.
Yeah.
That was a long time ago.
I was back in college.
It was just something to do, man.
It was just kind of almost like a project of sorts.
I didn't know what to do about it, just I was a car guy, new platform, social media,
all this kind of stuff.
So I was like, let's try it.
See what happens.
And as they say, the rest is history.
We've actually known each other for quite some time now.
I actually, the first time I met you was at SEMA.
I, like everybody else, followed you and somebody was like, oh, hey, this is Garrett with American
Muscle HD.
I was like, oh, I wouldn't have ever known.
Right.
Exactly.
And that's how a lot of the interactions have gone over the years.
But again, we've known each other for some time.
But this is the first time I've been able to come out to your facility and I'm thankful
for the hospitality and whatnot.
But this is, I mean, just quick glance.
I mean, this is incredible.
Like, I knew you guys built trucks, but I didn't know the full scope of what you guys
do.
I was like, why is this place so big?
No, genuinely.
I was like, I didn't know, one, that you guys were working on so many projects at one time.
And then I just didn't know there was so many arms of the business.
So, you know, it was, it was just shocking and eye opener again, talking about all the
other shops that I've visited over the, you know, over the United States, their shops
are just, they're smaller and it's not, again, not taking anything away from them or whatever,
but it's just like when I stepped in here, I was like, wow, this is way bigger of a production
than I expected it to be.
So I'm very excited to, to show the folks that have never seen it through my channel
and, and just, you know, do a little walkthrough.
Cool.
So we're going to talk about some of those arms you mentioned.
And so we're going to come over here and we're going to talk about the upholstery arm.
So we've got a seat right here.
If you take a look at this, this is going to go in this truck right here, belongs to
this truck.
This is the second seat we've actually done for this truck because he actually picked
a different color.
And then there was so much like green and chrome and stuff on it that the brown interior
kind of wasn't like hitting very well.
And so he's like, Hey, I think I want to change it.
And I said, Hey, I think it's a good idea.
And so we are going to use that interior on another truck he has.
And so we're able to pick something out in this fly.
I'm going to shoot it.
Anyways.
And so, so we, we do a lot of interiors, so let's walk back over here and we'll talk about
some of that stuff.
We, we do.
Now, Garrett, we started doing interiors like a lot of things we do here is because we,
we struggled with timing.
Yeah.
Timing is everything, right?
Whether you take a vehicle to a body shop, upholstery shop, whatever you're waiting for.
And when you're building things for people getting hung up on time and keeping that like
it was hard to keep my guys busy because I'm like, Oh, well, we're waiting for, I can't
get that back to finish this because so-and-so's got it.
Like all of that stuff just became problematic.
And so quality timing expectations, you know, all that stuff was really hard to control.
So I thought, well, if we're going to meet the demands of our expectations.
And so in order to do that, you find out, well, we can't be at the mercy of someone
else struggling, whatever they struggling with, there's all kinds of things against
us with that.
Well, it's just own it ourselves.
And every time we do that, it's a massive undertaking.
So this is one of those.
Setting up an upholstery shop is not the easiest thing in the world because turns out somebody's
got to know how to sew, cut foam and cut foam, all that stuff.
And so you're here on a Friday.
So Friday is much more peaceful.
It's calmer.
It can be a lot busier when you have, you know, everybody here because there's about
75 people here during the week that work.
And we have about 10 here in the upholstery shop.
And so we'll get hides of leather here.
We roll it out.
We inspect it.
We cut it.
Sew it.
And it's pretty fun.
We have a good time with it.
And so, you know, we talked about this before, the upholsteries that you guys do, the seats
and center consoles and all that kind of stuff, door panels.
It's not just for projects that come in here that you guys are doing from ground up.
You guys are making stuff to send out to people, which is another, which is pretty cool.
It is.
People can purchase from you directly bolted in their truck.
And I actually, you know, I saw somebody out in the foyer coming in, showing you swatches
or showing paint schemes of their truck to get the right color to match and stuff.
So they don't have to necessarily bring their truck here to you in order to get in their
interiors.
And that guy came.
He drove here from San Francisco.
Oh, wow.
And the reason why he drove from San Francisco is one, he wanted to come see the shop and
had the same reaction you did.
But two, he thought it'd be kind of fun to just go through the experience and take a
look at it, see what that looks like.
And so we do.
So a lot of people would just say, Hey, I've got a truck.
I need an interior.
I'm just going to buy one, work with them on color, and then I'll have it shipped to
me in a box.
And so we do the seat, a headliner, door panels, kick panels, speaker boxes.
Oh, wow.
Let me show you a speaker box.
So now we're not going crazy, right?
We're not.
We're not like, yeah, if you want to just like rock out and you're so focused on it,
this probably isn't going to be what works for you for sure.
But if a guy's looking for a speaker box, you're going to get a speaker box here.
All this wiring comes up into your speaker box and gets wired into your amp.
There's a little side cover that goes on and covers up all the wiring, but it at least
gives you access to bring it in.
And then you got this little cover when it's all said and done, covers it all up.
And it's just, again, we got a Moscone amp, you know, we can control this very easily.
And then we got a couple of eights in here, Focal eights, you know, they're going to get
good quality, clean sound, even log into this and help them tune this if we if they need
a little help.
So it gives us a little flexibility.
So just finishing up the interior in here.
This is the beginnings, if you were to look like of a kit, somebody can purchase and get
delivered.
They can get the speaker box, the door panels, the armrests.
They can get all this stuff.
They can put it in their truck themselves.
And so one, we can do a high quality job and a consistent job.
And then it's actually probably taken three, four hours to install it.
Yeah.
And I mean, I think that's one of the biggest takeaways from from what you guys do and what
I've learned about what you guys do is that this arm of the business allows people to
be able to do things on their own.
Like again, you're not getting swamped in with having a million trucks in the shop or
whatever.
And people don't have to worry about shipping their trucks to you, right?
They can just order the stuff and then just do it themselves in the garage.
And it's not super difficult.
And whatever is difficult, you guys can help with.
All right.
Let's go talk about another little arm of the company.
All right.
I'll tell you one of the arm of the companies I hate is this right here.
Oh, wood.
I hate doing the wood.
I have to do all the wood bits.
And so we've got this one there.
They're just kind of getting ready to lay this out.
And I've got all trimmed and and we're going to do a final fitment and finish.
We're trying to hire somebody to take this over for me because you're personally doing
it.
I personally have to do all this.
Yeah.
The boss man don't want to do it.
Oh, man.
I'm actually I've done so many.
Yeah.
But I'm like, I don't have time for it anymore.
Right.
But so it is kind of my my thing.
So one of the things we do here are we develop products.
Now, have you ever wired anything?
I don't like wiring.
You know, I won't even mess with it.
Yeah.
Oh, gladly pay somebody to do it.
I don't like it either.
I remember the very first vehicle I wired, if it burnt down to the ground, I wouldn't
be surprised.
Yeah.
This is we're going back 10 years.
Right.
I thought a wire was a wire, you know.
And technically it is to some degree.
Right.
But the gauge of wire, its function, does it need to be handled certain amps?
The longer it is means, you know, and the more amps it has, maybe the gauge needs to
be brought up.
Does it need to be, you know, cover because it's next to something else?
And so there's a lot of data that goes into this and we've been trying to figure it out
and be consistent.
But I noticed I could have like three guys go to the same truck and all wire it three
different ways.
Right.
Not drastically, but enough that ability to diagnose was hard.
And so what I decided is that, hey, we're, I'm all done.
We're going to develop wiring harnesses in the, for us in the shop to use so that my
guys have full schematics.
If the, if the truck has an issue a year down the road, we got schematics to help the customer,
you know, figure out it's all labeled correctly.
And so, and while we were doing that, we decided, hey, let's, let's make this not only just
for us, for others.
So this is kind of how it starts full, full blown layout, figure it all out.
And then once we have the prototypes, like you said, everything done, we order up, you
know, 20 or 30 sets and then we sell it to the general public.
So this is a brand new product.
We just actually launched 67, 72 Fords, then 53, 56 and 73, 79.
And then we'll wrap up all the Fords here in the next little bit.
And then we're going to go into gen one Mustangs and Fox body Mustangs.
Okay.
Any, any GM stuff?
Yep.
That'll be next year.
Okay.
Yeah.
We're going to wrap up the Ford this year.
Then all the GM, LS, LT, all that stuff will be wrapped up next year.
A lot of the parts that are over here are built off that, that same concept.
So if you go to the website, you're looking at a lot of parts that have been developed,
you know, because we've used it here and we still use it, but we have a lot of one-off
stuff that we do that never makes it to the website because yeah, it's just, no one's
going to buy this.
Yeah.
Right.
It's, it's not, it's just only for this specific thing.
Yeah.
And I'm still surprised people will see it on a video and they'll be like, Hey, could
you make more of those?
And you're like, sorry, dude, we only did one.
Yeah.
Sometimes you gotta, gotta leave, gotta leave something, you know, unique.
Yeah.
I get that.
Well, another one of those arms, we've been selling chassis for the past, you know, four
years.
Okay.
We've been taking the Porter built chassis that we developed with Nate with Porter built
and cause he didn't do any Ford stuff.
Okay.
And I said, Hey, we'll, we'll help you.
Let's let's, so we kind of split some of this initially up front to kind of design Ford
stuff.
And, and so a little bit of a slow rollout over the last four years, but you know, people
were noticing when they buy a chassis, they're kind of wanting like, like finish.
Yeah.
They don't want to, they don't want to do nothing else.
Have to drop the body and drop a body engine, send it powder-coated, send it, you know,
done.
I just want to put my body on it, plummet, wire it and drive it.
Yep.
And so we've been doing a lot of that stuff for people and, and it's been ramping up quite
a bit as it's been ramping up, we've been, you know, like lead times are getting way
out there.
Porter built it's like not able to keep up and, and he's doing his best, but it's just
turning into like more than he can handle.
Yeah.
And, and it wasn't fair to like, you know, force him to handle our stuff of course, right.
He's running his business the way he likes to run his business.
So it just kind of came just a natural consequence that we may have to own this on our own.
Yeah.
And unfortunately it wasn't really something we really wanted to do, but we recognized
we'd created a market share that we either had to just stop doing chassis or go all in,
go all in.
So all in.
Yeah.
Well, if you know me, I'm all in.
And so we've gotten laser CNC machines, press break machines.
And now we'll, we'll go back here and we'll show you the chassis that are now coming out
of the shop.
We've actually only built two and they're two of the exact same because we were just,
you know, you want to learn, you know, what's that process like, right.
Can we actually make a chassis?
Luckily we bought the right equipment.
We've got super good quality equipment and great techs here.
And so this is chassis pretty much number two.
We've got a couple of little things to wrap up on Monday, but nothing major.
We just finished this one up.
It's a 1953, 1956 Ford chassis.
We actually sold quite a few of these, believe it or not.
It's all fully welded out, done.
We just got to put the upper lower control arms, but those go on separately and this
is ready to go out and get powder coated and, and go to a customer.
And so when we measured this diagonally to check for square, it was one 32nd of an inch
out of square.
The truck is more out of square than this probably is.
Oh wow.
You know, a 1953.
Of course.
Yeah.
Right.
That thing's been all over the place.
Yeah.
So it's probably, that's probably more out of square than this.
So, but we've worked really hard not to obsess about it being Z on zeros, right.
But to know that, Hey, it's going to be within tolerance and right out of the gate, we hit
that one right on the, on the head.
But just kind of going through the process, learning what we like, what we don't like
and things we want to change.
And we've, we've come up with some different things that, you know, we've already changed
to make better and we're excited about it.
So we've got a good team of welders here.
We got some good guys running some of our equipment.
This one was done twice as fast as the first one.
Of course.
And so, Hey, you know, and, and we're really not making anything for quite anyone yet.
We have about a couple more chassis left that we want to just dial that in before we just,
okay, we're ready.
Yeah.
You know, if you take a look at the welds, they do.
It's pretty good.
Yeah.
It's really good.
It's probably about as good as you.
I don't know how to weld.
You don't want me welding.
Nothing of importance for you, man.
I can tell you that.
I've welded.
Actually, I've only welded maybe, maybe two times in my life.
And one time was, um, I welded like a, a brake pedal to a bracket.
Okay.
It wasn't good enough to, to put in the truck.
So my boy broke it down and rewelded it.
It's just, let's just put it like that.
You know?
Garrett, Garrett, I got you.
Yeah.
No, he, he, he, um, entertained me, I suppose, and allowed me to try it.
And then he was, after I turned around, he was like, nope, we're gonna redo it.
Exactly.
He's gonna kill himself.
Yeah, exactly.
And thank you.
And it wasn't even for me.
That was the other crazy thing.
I think it was just a random brake pedal.
Well, uh, we'll go, we'll go over here and, uh, we'll show you some of the trucks we work
on.
Cause we do actually do builds here.
We're not just a parts company.
Right.
Here's what we call, you know, Sanford and Sons, you know, old pickup truck, you know,
if you just were to see this sitting out in the field or in somebody's driveway, you wouldn't
think, or maybe parked at a grocery store.
You think nothing about it.
Right.
If you know anything about the trucks and you think maybe cause it's sitting a little
low.
Yup.
But yeah, that, that would be very unsuspecting.
Very unsuspecting.
We've squeezed in coyote motor, new radiator, new, new everything in here and got this all
dialed in there.
It's finishing up the exhaust.
It does run, you know, we fired it up and we're getting really close to where we just
need to throw an interior in it and drive it.
That's awesome.
But it's, he, he, he, like he, he wanted this.
Yeah.
Now we painted the firewall red because we kind of cleaned that up.
Right.
And just to kind of keep a nod to this, like, you know, original red paint.
Yeah.
And just kind of let that, let that stay the way it is.
But you get these guys, it's called a revival series where we're kind of reviving old vehicles
and kind of pull them out of the field and put them on a new chassis and maybe paint
the firewall, paint the inside of the cab and, and drive it, drive it like you stole
it with this one.
A hundred percent.
And I, and I mean, there's something to be said about that because then most people know
when you start worrying about paint, then you get in your head about, oh, I don't want
to take it certain places because I don't want to get it dinged up or you get mad when
you do get a scratch.
So when you own something like this, you could just open the door into the wall and you don't
care.
You don't care.
Yeah.
We'll go look at some other fun stuff.
All right.
So this is a, this is a fun truck here.
What you'll see here is a supercharged Whipple right on a long bed.
Yeah.
Everybody always thinks, oh, well everything has to be a short bed.
Long beds are actually making a real big comeback because a lot of people have long beds and
they actually want to keep their truck, but they, they want the handling, but they don't
want to make it a short bed.
I've actually found that a long wheel base with the supercharger handles quite well.
Really?
Yeah.
You just get that, that little bit more stability built into it.
It handles well.
So super cool.
What I'll show you here though, this is how products get developed.
As we come out here, we recognize it's hard for us to clear all this stuff.
Yeah.
So if you take a look here, right, this will go here and it'll get a little bracket that'll
hold it right there.
But we actually developed this oval snout little piece that takes us here into a five
inch cold air intake.
And so you can actually go to our website and buy this.
Okay.
And it comes with the, this and this, and you can, you can purchase this piece and then
it goes in and then we get a nice air cleaner here as big as we can, because the more air
I can funnel in through here, the more air we can get to the supercharge, you get to
the motor and it will have more power.
Of course.
But this has been something that has always kind of been troublesome for people.
And another thing we've been working on, this is a new part we're creating.
No one's actually seen this yet, but we're 3d printing it, testing it.
We're putting, putting the thing in here because we want to be able to put the condenser
and scare me when they open the door, want to put the condenser and some other things
in here.
And the traditional bracket doesn't allow for, there's not a frame since we have to
design a new bracket to make it work.
So this is part of when other people want to do a supercharger, what are they going
to do?
You know?
And so for this year, make a model.
And so we designed parts and this will, this here and another month will be available online
for people to purchase.
So, so, but it's getting painted.
This one's painted done.
I can think we're just going to be doing some alignments, checking some stuff, and
then they're putting miles on it.
The goal is, uh, hopefully have this truck done next week and off to the customer.
So it's fun.
Yeah.
It's got a Godzilla motor in it.
Okay.
And drives like a dream.
Jump in and go.
That's the best thing about these.
Again, the technology to be able to just do that in these old trucks and cars is just
the best thing.
All right.
Last little thing we'll show you.
Then we'll let you hit the road Garrett.
I know you got a lot going on.
So this is where we paint, you know, that, that burgundy candy paint that people love.
Probably the most iconic type of paint job for hot rods.
Yeah, I agree.
Is this, this color here, basically we're just kind of letting it cure.
Okay.
So we've got to cut it and polish it and that'll take a couple of weeks to get that done.
The longer we let it dry and cure, the better it looks when we go to do it.
Sometimes it can kind of like die, die back just a little bit, so you got to polish it
again.
And then this is one that just getting the paint.
We just painted this the other day.
And so this is a new project that was coming in the shops in 1956 Ford.
And you're going to want to watch this one.
Yeah.
This is probably the largest project we've ever done in the history of Fafner Garage.
Probably the nicest 1956 Ford that has ever been built.
Customized all the way through.
That I, that I'm familiar with.
Yeah.
But there is not a panel on this truck that has not been touched extensively.
I mean, we've sectioned everything, pancaked everything, widened things.
There's only one item on the truck we did not touch.
One.
And it's just the grill itself.
And we're super excited about this one.
I think I can show you a rendering.
I think it's up on the screen back here.
See if they still got it up.
Got the guys still back here finishing this up.
This is ready to go on final prime and ready for paint.
He's just wrapping it all up.
He's real close.
He's finishing it with 220 right now and he's constantly checking it and we're trying to
get it real clean so we can get the final primer on it and then we're ready to start
sanding it.
Get 320, 400, 600, then we'll be ready for paint.
This is a rendering of the truck.
You can see all the stuff that's going on.
Highly modified.
We've even got, we've pancaked the hood, we've pancaked this, we've sectioned two inches
out of here.
We actually modified this here.
We've widened it a little bit, widened all this stuff, all the running boards, everything
in the back is real similar to this.
A little bit different than that, but pretty similar and low.
Very low.
Is it static?
Static.
Dang.
And supercharged.
Yeah.
And so, made a lot of cool covers for it, but this guy's going to have the coolest truck
in North America, but not in the United States.
Canada.
Okay.
Yeah.
Right on.
That's awesome.
He's super excited, and I've been sending a lot of updates this week, and he's so excited
to see paint.
This has been a many-year project for us, and the fabrication just about did it for
us.
It was tough.
And here's the rear diffuser on the back of it.
You can see that.
Yeah.
Turn it over.
Okay, yeah.
Yeah, you can see that on the back of that truck.
Wow.
And the light's here, and then we got lights built into here, too.
Okay.
So, my guys are like, well, these aren't DOT compliant, and I said, well, it's a Hot Rod,
and there's no DOT in Canada.
Yeah, I was going to say, I don't think that that matters.
Hot Rodding has skipped over DOT regulations for a long time.
A long time.
I don't think anybody's going to trip about that.
I'm like, well, it's not like your everyday car.
Yeah, yeah, yeah.
But, dude, thanks for coming out, man.
No, genuinely.
Thanks for having me.
We're really excited.
Maybe we'll go cruising on some vehicles, just to go for a ride.
I mean, we got to see what the vehicle's capable of.
Yeah, we'll go do it.
All right, let's go do it.
Let's do it.
See you guys.
Just like that.
Just like an old truck.
Right.
It's chirping pretty good.
Yeah.
Oh, my gosh.
It just keeps pulling.
Just pulls hard.
And, like, I genuinely see why you don't need a supercharger.
Like, at least in this truck, like, you don't need it.
And that's saying something for me.
Like, it really is blasphemous words coming out of my mouth.
It feels like, to say you do not need a supercharger, it's crazy.
Yeah.
I smoked out that intersection one time.
Sheesh.