Installing AIR CONDITIONING In Our Off-Grid Home!

Wild Wonderful Off-Grid
30 followers
28 Video Views·Oct 21, 2022
We are installing a MRCOOL DIY Ductless Mini Split System in our off-grid home! Being that it is August, this could not be more exciting for us! Today is install day and in our next video we will be showing how the system is working with our solar power setup. Can our solar power system handle this new load or are we asking too much from a home powered by the sun?
Today is a great day because our Mr. Cool mini split systems just got delivered
and we are, that's taking priority over everything. We're jumping ship on
everything else because air conditioning. Yes and it gets a
little hot around here sometimes. Yes. Right.
So we got three 12k or 12,000 BTU units. We got one for the great room.
We got one for the back bedroom of ours and also the boys loft.
The reason why we went with Mr. Cool split system versus a
standard I guess HVAC system, I guess it's a lot more efficient.
I would need to spend thousands and thousands of dollars on my solar equipment to run a full-time
AC system in here versus having those mini splits because we can actually
have zones on and off where we're at and where we want to use them.
So if we're out here hanging out watching a movie,
there's no need to cool that back room or cool the loft.
So we can turn a few things off, run out here, stay cool down here and live our life.
It just makes more sense for us being that we are off-grid and we are on solar.
And also what's really nice about this system is that when it was delivered,
everything came with it. There were only a few things that we had to get from Lowe's,
but other than that, it was pretty much like a self-contained system, which makes it easy on us.
Mr. Cool system is a DIY system. All the refrigerants are pre-charged.
You hook everything up and you don't need an HVAC guy to charge the system for you.
You just need Josh or Aaron, whatever.
Brackets up. It also came with a template to lay everything out to get the thing mounted.
You also have to drill a three and a half inch diameter hole.
It's all set up for you to put on the wall. You mark it on the wall,
mark the center point of your hole you need to drill and wham, bam, you're done.
Mount the bracket, drill your hole and you put the unit on.
I got my extension on there so I don't have to go on the outside and drill back in.
This right here lets me drill through the wall, gives me the extension I need.
The second hole, you want that to be a slight bit lower than this first hole,
reason being because there's a drain line coming down through here.
This unit does create condensation and needs to drain.
So you need a slight slope so it drains out.
You don't want the thing being slight high or even because it could back up,
but you want to make it a little bit lower.
So the first unit is up and installed. The interior work is at least done for right now.
You could leave the unit just like this, the way that it is,
but we do plan on actually building it in a sort of way that it's kind of
disguised just so it better fits the interior design of our home.
But we still, you know, have all of the airflow and everything that we need for it.
Yes. We would have put it more, I guess, in the center of the room,
but us having an A-frame, right, I guess it's a bit of an issue.
Having it on a slant wall like that, it would leak out.
It does create condensation and need to drain out outside the house.
We have an angle, it'll leak out the front and we'll have a mess on our hands.
So we put it pretty much in the only flat spot we have in this area is that wall right there.
The best spot. So it blows out that way.
Exactly. So it blows out this way.
Everywhere else it would either be hitting like the top of cabinets
or blowing away that we don't want it to blow. So best spot for this.
Yeah. But it's a 12,000 BTU.
Should heat and cool around 500 to 550 square feet.
And that's what we're working with right here. So we should be fine.
Yep. So one of three is done and now we're on to the next one.
Bedroom. Bedroom.
About sixteenth of an inch out is fine. I'll make that work.
So we have enough to box around this, keep it hidden, put the crown molding up.
We'll figure it all out, make it all work when the time comes.
How in the hell did that happen?
Shovel broke. Today's just not our day, Josh.
I do. It's a wood one, but it's a little loose, but it'll work.
Ready to try this again?
Take two.
All right, so we got to raise it up an inch and a half.
Good enough. Good.
How you doing?
We have both our exterior units set.
The reason why they're staggered is because we need clearances on all sides of these units.
This portion right here or this side right here requires 24 inch clearance,
79 inches in the front, 12 inches on the far side and 12 inches on the back.
So we have all of our clearances met.
That's the only reason why we didn't put them right in line like that.
It would have been easier and nicer, but we had to stagger them.
This is the third exterior unit that we got placed on this pad here.
This one is at the front of the house because it is going to be closest to where
the interior unit that cools the front portion of our house,
where our living room and our kitchen are at.
And we only have a certain amount of like footage on it.
25 feet.
Okay. On the coils or what is it called?
On the line set, which is the copper line that goes from the indoor unit to the outdoor unit.
And I think it comes, you can get you to choose a 12 foot coil or 25 foot coil.
And we chose 25 foot because we needed it.
Yeah. We have angled walls everywhere.
Yes.
If we had a standard house with a vertical wall and a roof, this job would be a lot easier.
Yes.
And placement of units would have been a lot easier also.
Yes. We, cause we were limited.
Obviously most of the walls in our house are angled,
but we were able to find places that this was going to work for us.
However, two units had to be on one side of the house.
And then we had this one on the other side.
But the point here is, is our, we're going to have a deck.
Cause we are at the front door, which is right here.
There's obviously no steps or anything built off of there yet.
That's an upcoming project.
But eventually this is actually going to sit underneath the deck
and the bottom of the deck will be like kind of closed in.
I mean, not.
Yeah. So you won't see it.
Yeah.
Won't be that.
Yeah. You won't see it.
Yeah. So that's the plan.
And, uh, she said is, is twice in a row.
Oops.
And you just dropped our daughter on the ground.
You want mommy to kiss your boo boo?
Is that all better?
It just feels good to be alive.
Feels so good to be alive.
Landing from the dirt.
Watched it all burn down in fire.
We're history.
You've want and gained the poison of desire.
To pass it by as a money man.
We'll tell you what you need, but they don't know.
We had it all, but then we lost.
We played, we're a defense.
It just feels good to be alive.
Come on.
Waiting for some day to feel alive.
Storm rolled in.
I'm not sure how much more Josh is going to get done.
What do you think?
You calling it?
Fine.
For a little bit.
Oh, I'm assuming it's going to stop.
Fine. Quick thunderstorm.
So we got rained out.
Um, at least Aaron has my favorite Peruvian chicken in the oven.
Right?
Only the best for you, babe.
Thank you.
Rain's not going to stop until like 830 tonight.
So we're going to wire the panel up real quick.
Get ahead of a few things.
We're going to lock it out.
Probably not really want to go use tape instead.
It's going to be safe.
Just don't turn anything on and probably done for the night.
I'm at the unit at the front door.
It's going to be all under the deck.
We have three disconnects to mount.
We have three units.
Each one is a disconnect.
So we're looking at what we got here.
We have our line side coming in.
This comes from the panel.
This is our load side that goes to the equipment to my left.
And if you look right here, it says line, line.
These are your load terminals right there.
All I'm going to do is bring my black hot.
We'll tie the line side.
We'll go ahead and tie the load side into right here.
The neutrals, I'm going to go ahead and splice through.
I'm not required to, um, have the neutrals on disconnect.
So we're going to splice those through.
Call that done.
I'm going to take our ground wires,
go into the ground bus right there and be done.
Two's white.
Three is black.
And it came factory with these little stacons on there.
I'm gonna put my wire underneath that.
I don't have them, but I got the little plates there.
So I don't need them technically.
So we should be fine without them.
Got my ground going on.
Drop the neutral, put it under the plate right there.
Tighten them down.
Got my hot.
This unit's a hundred percent completed.
It's about to get turned on.
So we're gonna go ahead and go inside.
Fire it up real quick.
Make sure everything operates correctly.
And then we'll go back outside and finish the other two units up.
All right.
So we're going to do a test run real quick.
We've got power on, just beeped.
Direction says to go ahead and turn it on.
Put it down to cool.
Let it run for five minutes.
I put it down to as cold as it can go.
Let it run for five minutes if it's cold.
Then switch up the heat.
Do the same thing.
The guy said to check both lines,
make sure it's heating and cooling.
So let's go ahead and do that.
Opened up.
It's at 62.
Barely hear it.
I know, it's quiet.
It beats the hell out of the other one we have.
It does.
It's on right now.
You can barely even hear it.
So once you put the deck over top,
you're not gonna pretty much hear anything.
Hopefully.
It's not bad.
It's not like it's an outdoor unit in your house
when you have a whole HVAC and everything's blowing and roaring.
This thing's quiet as can be.
It is.
Which is nice.
It is cold.
How's that feel?
Feels good.
A little snack for the walk.
The cover's off.
We've got about five terminals we've got to hook up to.
It says 1, 2, 3, L, and N.
So looking at that, you see the L is our line side,
which actually is the hot that comes from the breaker.
Our N is our neutral side that comes from the panel.
Then you have 1, 2, and 3.
Look at this cable right here that came attached to the indoor unit.
You have a red, white, and a black.
Nameplate right here.
Red's number one, white's number two, and black is number three.
So looking at this nameplate for this system right here, it's 120 volts.
It says max fuse.
Our breaker size is going to be 20 amps.
And your MCA, which is your minimum circuit capacity, shows 15 amps.
And this is where a lot of people are going to have a heart attack, possibly a stroke.
You size your wire off the MCA.
You don't need to size your wire off the max fuse.
Max fuse is the breaker size, which is 20 amp.
Your MCA shows 15 amps.
So I can actually pull a 14-wire to here, attach it, and attach it to the 20-amp breaker.
That's where everybody's probably going to try to kill me here.
But it's not a receptacle.
It's not a lighting load.
Stuff like that needs to be a 12-wire on a 20-amp circuit.
But for something like this, a piece of equipment with a motor and everything,
you go by your nameplate.
The minimum circuit capacity is 15 amps.
That's what you size your wire off of.
The max fuse is your breaker size, 20 amp.
So we're going to put a 14-wire on a 20-amp breaker.
It's 100% legit.
It's code.
That's completely acceptable.
So that's what we're going to do.
So even looking at the booklet that it gave us, it shows different model series.
We have a 9K and 12K.
We have a 12K series.
Appliance amp shows 15 amps.
And it shows you've got to pull a 14-wire.
So you put a 14-2 here, even though it's going on a 20-amp breaker.
So it's legit.
So don't get all crazy in the comment section because it's right.
On this side of the house, it is more suitable to have the disconnects
mounted on a rack near the equipment.
Once the rack is built and the final two disconnects are installed,
we are left with the final unit in the boys loft, which is our dilemma.
We think we have a plan, but we will have to wait and see how it all plays out during install.
Our home runs on solar power.
When we designed our system, we took into account all of our appliances,
but not the potential load of air conditioning.
Can our system handle this new load?
Or are we asking too much from a home powered by the sun?
