Building the WORLDS FASTEST Jet RC Car!

Sci-Republic
4 followers
31 Video Views·Oct 21, 2022
I've built an RC car powered by a real working jet engine, and this video is all about seeing
how fast that car will go on a track.
Last month I showed you how I started building the car, but now I've made it super aerodynamic
and have taken it to a racing circuit to test at high speed.
So how fast did I once take the jet car at the track?
Well, I'd never run any RC car at this sort of speed before, but I wanted to try and break
the 100 mile an hour barrier to really show you what this car is capable of.
I had a problem though, which was that the racetrack could only give me five days notice,
so I'd have to work really hard to get the car prepared if I had any chance of hitting
that target.
This video was sponsored by Squarespace.
The most notable upgrade on the car was the aerodynamic body.
This is just a vacuum form shell made for the armour limitless chassis that I base my
jet car on.
I chose this particular shell as I've seen a couple of other people using it on their
speed car projects, notably the holder of the current RC land speed record, James McCoy.
It has a wedge-like profile that can shovel loads of air upwards over the nose, which
means that it creates loads of downforce.
Turns out downforce is actually super important for these kind of cars at high speeds.
A lot of speed cars crash because air gets underneath them, which results in a high speed
somersault of doom.
With this car being the most expensive project to date on this channel, with my precious
jet engine strapped to the top of the car, you'd imagine I'd be less than pleased
for the result like that.
I decided to cut away the wheel arches on this shell for easy access to change tyres
and steer easily.
I could always get myself a second shell in the future, which would be more aerodynamic.
With those jobs done, it was really starting to look pretty awesome already.
Next up, I needed to mount the engine through the body shell.
Ensuring clean, uninterrupted airflow to the engine was essential for maximum performance,
so it really needed to be above the body in clean air.
The old engine mounts I was using before weren't quite long enough, so I modified the SDL files
and printed some more.
You'd be right in thinking, but James, this is going to raise the centre of thrust and
the centre of gravity.
Yes, this is very true, but I wasn't too concerned about this as the high thrust line
would actually help to keep the nose down when accelerating, adding to the downforce
effect and making sure air doesn't get under the car.
Next, I had to work on the parachute for the car as my previous parachute tests yielded
some pretty poor results.
I ended up making three versions of my deployment system, and yeah, even the final iteration
was far from perfect.
Right then, how was I going to keep this car stable with that huge engine and relatively
short wheelbase?
With such a short car, I thought that going with some more extreme fins was going to be
needed.
Stability is all about the distance between the centre of pressure and centre of gravity.
The smaller the distance between the centre of pressure, or drag, at the fins and the
pivoting point of the vehicle at the centre of gravity, the larger the fins need to be.
Unfortunately for me, my centre of gravity can't really go much further forward with
the engine where it is, so I needed to make some really big fins that extended backwards
to get the centre of pressure really far back.
With these twin fins, the jet blast could travel between them very easily.
It was actually quite tricky to mount these fins as previously I'd cut away some of the
diffuser which the original rear wing of this car attached to.
Oh, this is awful.
I made do though with a DIY solution by cutting some aluminium struts that would tie the whole
thing together securely.
Just in time, two complete sets of foam tyres arrived which were very needed if I was to
go for some serious speed runs as the rubber tyres I was previously running apparently
tend to blow up over 100mph due to the centrifugal forces, so yeah, worth forking out for the
new ones I'd say.
I also made sure to get loads of fuel so that I could spend the day at the track running
up and down and tweaking things without running out.
Right, now before we go to the track, I need to quickly test whether the whole thing will
melt when we fire up the engine.
Hopefully the tinfoil will do its job.
At this point, as you'd imagine, something going wrong would be very bad indeed, so I
hope for the best and hit the start button.
Despite the heat of the engine, everything looked good and that was a relief.
The body didn't melt and, yeah, all of the systems worked.
Well, that's a win in my books.
Let's load everything into the bigger car and then we can go to the track.
Right, before going to the track, it's time for a very quick ad from the sponsor of this
video, Squarespace, who've really helped to make this video possible.
From websites and online stores to marketing tools and analytics, Squarespace is the all-in-one
platform to build a beautiful online presence and run your business.
Here are some features you should probably know about.
Buying a domain from Squarespace is super simple because there are no hidden fees or
price hikes.
You can sell your products on an online store and whether you sell physical or digital products,
Squarespace has the tools you need to start selling online.
You can present your work using Squarespace's professional portfolio designs too.
Display projects in customisable galleries and add password-protected pages to share
private work with clients.
A website might be the perfect way to present your projects to the world with your own corner
of the internet.
So, head to squarespace.com for a free trial and then when you're ready to launch, go to
squarespace.com slash projectair to save 10% off your first purchase of a website or domain.
Alright, on to the racetrack.
I've never driven on a racing circuit before.
So this is Daly Moor circuit.
It's nice conditions today.
We've hired out the track so that we can have the best possible sort of situation for testing
the jet car.
This is an old airfield and it's basically just three big straights which are all connected
in a triangle.
The longest one is 700 metres so that's the one we're going to be using today.
It's going to give us the longest length to do some speed runs.
So I got the car prepared, inspected the track and made sure everything was working before
I could go for the first test run of the day.
So camera's not rolling yet, neither's the GPS.
Brakes work.
That's good because we're going to need them.
So we've got the GPS on here, it's just finding the satellite at the moment and we're going
to slowly, incrementally build up the speed over the day and see how fast we get it to go.
Okay, let's see if this works.
Okay, I'm just going to go up the road and then I'm going to turn around and come back
a bit fairly slowly.
This is only at idle speed so I'm not increasing the throttle whatsoever.
All I was doing here was releasing the brake and letting the car accelerate under the thrust
it produces when running at its minimum speed.
I'll throttle up a bit on the way back, only a little bit.
With me briefly using about 10% throttle, the car looked stable and was easy to keep
in a straight line, which was encouraging.
So that was 57 kilometres per hour, which, yeah, I was only going slightly above minimum
throttle.
The tyres are rubbing against the body here because the ride height's a bit too low.
So I think I'm going to have to raise the suspension up by adjusting the coils and I'll
also do the back ones so that the nose is still pointing downwards.
Okay, time to go a little faster and test an important feature of the car.
This is the second run.
I'm going to test whether the parachute works.
I took it quite a lot faster that time, but unfortunately, not everything went to plan.
Yeah, unfortunately, the parachute didn't work that time.
So I'm going to have to try that again.
The parachute was coming out of its housing, but not being caught in the airstream as
expected. But I had an idea of what was causing this.
I think it's because it wasn't packed correctly.
So now I've packed it with a bit more tension on the line.
Speed we got to there was 85 kilometres an hour.
So maybe the next run we can try and hit 100.
Right, would the parachute come out this time?
Parachute didn't come out again.
Well, that was a bit faster.
Right, while I go and collect the car, here's what was wrong with the parachute.
I've realised that it's in a vortex, the parachute, where it sits, where it pings out.
So therefore, the air is actually coming back on itself and not going to the airstream,
which means that it doesn't inflate or fall off the back of the car.
So I think I'm going to have to do something to fix that another day.
Yeah, this isn't really firing it out.
This is getting stuck in the vortex with the air coming off here and from the under
tray. It's just sort of sitting here.
All right. What speed did I get up to that time?
113 kilometres an hour.
That's pretty good. Now I needed a new target.
Let's try and hit 160 kilometres an hour, which is 100 miles an hour.
I think that would be a good achievement today.
Low rate. Three, two, one.
That's pretty fast. So that looked fast, but had I reached my 100 mile an hour target?
Right, won't be a minute.
Let's have a look at that speed.
Oh, 149.
That's about 90 miles an hour.
Yeah, that was pretty good.
The good news was that I knew for next time all I needed to do to get past that 100
mile an hour barrier was to use just a bit more throttle early on in the run to
accelerate faster before I reached the braking zone.
On inspecting the car, though, I found I still had some issues to contend with, such
as making sure that my tyres didn't explode.
The body was still coming into contact with them, probably due to the higher speeds
that the car was now travelling at, squashing the body shell down onto the tyres.
So I adjusted the ride height again and then attacked the wheel arches with a pair
of scissors. Next, I could change to a fresh set of tyres, refuel the car as I did
between each run and get ready for what would unfortunately turn out to be this car's
fateful final run.
I enjoyed that coming towards me.
The car was totally wrecked and it was game over.
But how fast did the car go?
190.
That's right, the car had left the track at 118 miles an hour, which is pretty
impressive as the car crashed way before reaching the braking zone and I wasn't
anywhere near full throttle.
It could have gone a lot faster than this.
Slightly damaged.
Actually looks all right though.
So what happened? Why did the car crash?
From the onboard, you can see that the car started wobbling at the start of the run.
And as the car rapidly accelerated past me, the car was in one of these oscillations
and heading towards the grass.
Unfortunately, it was hard for me to actually see that the car was at this angle.
And by the time I saw it and tried to correct, it was too late.
It was over before I knew it.
But would this car ever run again?
OK, how badly damaged is the car?
Somehow the chassis and engine survived with almost no damage.
The engine might need a clean and a rebuild as well as a new thrust tube.
But the chassis is almost completely fine, aside from the splitter being ripped off
after being rammed into the dirt at 118 miles an hour.
I think I accidentally designed the car to survive a crash quite well.
The 3D printed mounts for the engine broke easily, dissipating the energy of the crash,
which allowed my precious turbine to bounce along the grass, mostly unscathed.
The fuel tank, too, flew about 20 meters away without exploding, which was, yeah,
quite helpful.
We actually got some fuel back.
This also helped the chassis to survive without even breaking any of the suspension
parts or anything like that.
Obviously, that survived because it was very strong as well.
So, yeah, kudos to Armour, who manufacture the chassis.
Unfortunately, I was going to attend an RC car event at a 2.5 kilometer runway next
month, which would have been perfect for testing the car at full throttle.
But that might need to be postponed now as I get the car fixed up.
So are turbines the future of RC speed cars?
Well, I think they might be.
Right, I now have a decision to make.
Do I, one, rebuild the car in its current form and go for a higher speed on a longer
runway? Or two, do I build a completely new car with some new interesting features
that might be interesting for you to watch in another video?
Or three, do I do something completely different to both of those?
Let me know in the comments down below.
And if you've enjoyed this video, go and check out this one next because you might
find that one a good watch.
I'll see you on the next one.
