In this interview, we sit down with Charles from Lamspeed to explore what it takes to turn Toyota’s GR Yaris into a record-breaking machine, using a surprising amount of standard parts! The team currently holds the title for the world’s fastest GR Yaris, with a 9.6-second quarter-mile at 155 mph at the time of filming and a 9.4-second pass since then, resetting their own record. Charles dives into the challenges and engineering breakthroughs Lamspeed encountered along the way.
To push the Toyota Yaris G16E-GTS 1.6-liter, three-cylinder engine to extreme levels (pushing almost 900hp out of a 3-banger is impressive!), Lamspeed rely on key components from top brands, including MoTeC for advanced engine management, handled by Phil from Armour Motorsport, and Carrillo CP for custom pistons and rods to support the high-power demands.
For turbocharging, Lamspeed initially used a Garrett G30-770 for circuit racing and has since continued refining setups to extract maximum performance with a Kelford Cams valve train aiding in great turbo response along with the retained variable valve control system. A ported head and supporting mods added around 180hp along with head studs custom-produced by ARP to address head-sealing issues early in development, a critical factor for reliability under high boost.
Transmission upgrades include a Kotouč 7-speed sequential gearbox for drag racing reliability and previously tested options from Drenth. With Lamspeed’s detailed and iterative approach, every part and upgrade has been meticulously selected and tested to push the limits of the GR Yaris platform without compromising performance.
So Toyota's GR Yaris has become an incredibly popular platform in the tuner market.
I'm here with Charles from Lamspeed, owner of currently the world's fastest GR Yaris,
running as quick as 960 at 155 mph.
Now Charles, this is a 1.6 litre three cylinder engine, I'm pretty convinced that Toyota
never expected it to be running this quick.
Why is this platform so good and why can it support so much power?
Pretty much we've developed it from the very beginning, every little hurdle which we've
come across, everyone's got to have issues, we have our own issues as well, once we find
the limit of a certain part or issue of the platform, then we just pretty much go out,
develop and manufacture an upgraded solution, test it on our own car and then from there
all our customers are able to purchase it.
So you haven't sort of approached this from a let's throw the kitchen sink at it with
every part that we think might need upgrading, you've gone through in a more scientific
approach and just found parts where their limits or failure points are?
Yeah yeah of course, say for example, one of the very first things which we ran into
was the head sealing issue.
Back in 2022 there was no head studs made so we were starting lifting heads around the
circuit.
So from there we approached companies like ARP to manufacture, well we pretty much sent
ARP all the specs which we needed, ARP manufactured us some head studs, we put them in even with
the factory head gasket and it's been pretty good and from there we would hit issues such
as the factory head gasket and then from there we would just upgrade it from there.
I'm interested, when you're kind of getting it on the ground floor with a brand new platform
and developing it, you go to a manufacturer like ARP and say hey we need a set of head
studs, at that point, giving them all of those specs, are they making a head stud specifically
for you that you're selling through your brand?
And more than what happens do they come in later on and say hey actually you know what,
this is a really popular product, we're getting asked all the time and then they kind of steal
your thunder and make their own, how does that work?
Look I did have a bad feeling about it, however it is what it is.
Sometimes things get copied and you can't really do anything about it but if you need
the part, it is what it is, you just have to bite the bullet.
Let's just take a step back here, so it's a 1.6 litre 3 cylinder engine, what is the
power in stock form and then if we take things to extreme, what power level are you at now
in order to run 96, 155 mph?
So at the wheels, they probably make about the 140 to 150 kilowatts.
We currently, what's that in horsepower, I don't even know.
I can't do that in my head, let's just work in kilowatts, other people can figure it out.
Yeah but at the moment to run 960, we currently make about 880 horsepower at the wheels.
OK that's a substantial jump forward even if we're not necessarily converting between
kilowatts and horsepower here on the fly.
OK so even in stock form, one of the great things about tuning a turbocharged factory
engine is that almost always there's a little bit of headroom left, a little bit of power
to be gained by tuning it, by increasing the boost pressure.
So how far can you take that 140, 145 kilowatts in stock form?
Look on my personal car, we went probably like I think it was 270 kilowatts when we
ran the 1050, completely standard engine, standard cams, just with valve springs,
standard head gaskets, standard head bolts.
That particular recipe has been passed on to other customers around the world and they're
still running mid to high 10s with completely factory engine.
That's pretty impressive for a stock engine, normally that's going to require a fairly
comprehensive upgrade with pistons and connecting rods and just about all manner of upgrades.
Yeah usually but I guess if the tune's spot on, yeah it'll last.
We've got a customer's car, Wesley Tang's, his setup on a standard engine has been about
two years now and that does street, drags and circuit.
That's definitely impressive.
Obviously in order to get any of this unlocked power out of it, no matter how far you're
going, you need a tuning solution.
What have you gone to there and is there reflashing and aftermarket solutions?
We haven't done any reflashing at this stage, it's more MoTeC and that's all looked after
by Phil from Armour Motorsports.
So he chews my personal car and all my customers' cars.
Yeah as I understand it as well, MoTeC have made this a little bit more straightforward
in that they've brought out a plug and play ECU package with firmware specifically set up
for the GR Yaris?
Yeah pretty much, it's a plug and play.
Only small downside if you're really worried about it is the radar control.
So you're talking here, you lose the benefit of the radar based cruise control?
Correct.
One of the nice functions with this particular engine is that it incorporates both direct
injection and poured injection and one of the great things about direct injection is the
advantages it gives, mainly for OEs in terms of emissions and efficiency but very limiting
for us in the aftermarket because it's not as easy as just switching in a larger set of
direct injectors, it doesn't quite work like that.
But with the addition of the poured injectors, you can then keep the factory direct injection
and simply fit larger injectors to suit the power range?
Yeah of course, even with our fuel rail that comes with our billet inlet manifold,
you can pretty much fit any EV14 injector into it so we've got 2600cc's in there.
In terms of what you've needed to do to the engine in this particular car, can you go
through, obviously that's a little bit more than just a set of head studs and a head gasket.
Yeah that's right, we've pretty much got a custom set of rods and pistons manufactured
for us by Carrillo NCP.
Standard crankshaft, standard rod bearings and main bearings.
There's a very limited number of upgrades given the massive power level.
Yeah of course, it's very basic, a lot of people think that you have to throw everything
at it, nah not really.
Alright so the bottom end of the engine, the crankshaft, the pistons and rods are really
there mainly just to support the higher power level.
How about the cylinder head, cylinder head cams, that's really about getting the airflow
in and out, obviously in conjunction with the turbocharger, what's been done to the head?
Last year for circuit it was a completely standard head with just Kelford valve springs,
retainers and camshafts.
It was a pretty mild set of cams.
Then we hit a limit and so now for drag racing, we've got a ported head, bigger cams and
even better valve springs and the retainers for Kelford as well.
I'm not sure if you've done this as a back to back test but could you give us an idea if you
have of what sort of benefit maybe just the likes of the ported head on its own gave you?
We all capped at about 700 horsepower, we added more boost and nothing really happened.
Alright bottleneck, put a ported head on and slightly bigger cams and we picked up
180 horsepower.
OK that's not a small improvement.
But we can see at that point, massive improvement for that set of modifications.
A lot of this is also going to come down to the turbo that you select and in this case
the car is dual purpose, you're using it for circuit racing, I believe last year it was
fourth in club sprint here at World Time Attack.
What do you do with turbo sizing for those two disciplines?
For circuit racing last year we had a Garrett G3770.
We actually ran a 98 with that turbo in complete circuit trim, circuit suspension and everything.
And recently we've changed quite a few things and we've gone 96, however the car wasn't
at its optimal stage, it wasn't going straight and yeah.
So there's more in it is what you're saying?
Yeah soon.
Coming back to that circuit spec, I'm picking here if you've only done rods and pistons,
I'm guessing you probably haven't been able to really get much of an increase if anything
in terms of capacity.
That's a big turbo, a lot of power for a 1.6 litre engine, what is the usable power band
on the racetrack?
On the circuit setup, pretty much there's power everywhere from about 4,000 to 8,500.
That's much wider than I'd think.
What is it about this little 1.6 litre engine that allows it to spool a relatively big turbo
so well?
With the variable cam timing and just feel works his magic and yeah it does what it needs
to be done yeah.
So you're basically able to get the best of both worlds, low end performance and still
huge numbers up top?
Yeah of course.
Alright my next obvious question here is how on earth do you hold the drivetrain
together with that much power, can you go through what you've needed to change there?
Yeah so in early stages of development when the car was pretty much standard at 240
kilowatts, we broke the fifth gear hub sleeve on the factory gearbox.
From there it was pretty close to world time attack and we just bit the bullet,
went straight to a H pattern dog box and from there at this stage it's got a Katuk
7 speed sequential.
7 speed sequential box, OK that sounds like probably a fairly pricey upgrade in order
to get reliability.
I'm just interested as well, again you're a pretty early mover with this platform,
you talked about the ARP head studs before, were you sort of driving the development
of the aftermarket gearbox options as well?
Yep I have tried the Drenth which is also a very good sequential, we ran the 9.8
with the Drenth.
So I've actually tried many other manufacturers as well, just pretty much for my own experience.
So you're developing this essentially to pass this experience on to your customers
so that they're winning as well?
Yep exactly.
OK what about the rest of the drivetrain components, you've got a transfer case I'm
seeing here as well as a rear differential and also axles, how reliable are those components?
So far we haven't broken anything.
It's got a standard transfer case, standard axles and a standard rear diff with just
LSDs for traction around the circuit and our billet cover for the rear diff just to
keep temps down but that's not really relevant for drag racing.
That is really impressive that it'll hold up to that sort of power level.
I guess where do you see this going, how far can you push this, have you got an idea
of where you're likely to see the next failure?
Is the engine block reliability and crankshaft reliability likely to come up as an issue?
We're same with everything, everything's got its own limit but for now we're running on
the same bottom end for two years now and we haven't reached the limit yet so I'm not
too sure but the main thing is just to have spares ready to go.
Yeah that's about it.
On that note though, how do you sort of approach the tuning philosophy, I understand
obviously you're not actually on the laptop yourself but in terms of, in conjunction
with your tuner, how are you deciding how you take the next step, how aggressive are you
with this or has it just been very gradual iterative improvements?
No it's always like small improvements.
So I work pretty closely with Phil and Phil tells me look you're slowly running out of fuel
or this needs to be changed and then we just work slowly from there.
So say for example we originally released a surge tank kit to supply more fuel.
It was only until I think the start of this year where we've changed from a Walbro 525
to a brushless pump.
So now the pump's ready for 2000 horsepower, more than enough.
When it comes to the drag racing side of the equation, it's obviously not just about making
massive amounts of power, it's also about getting that power to the track.
So it sort of is a bit of a balancing act.
I mean on this platform with the current tyre on it, is it likely that given enough power
you could see this dipping into the eights, I mean that is obviously a lifetime away
from a nine six but I'm just interested, do you think that's realistic?
I believe it is realistic and that is the goal.
Touch wood, I don't want to jinx it or anything.
Yeah I haven't really told too many people.
Don't worry, not too many people will be watching this.
Yeah pretty much but yeah that is the goal.
We do have pretty much backup contingencies if we do come close and we don't quite get there.
But that's all in theory on paper but whether it works in real life is a different story.
Well it's certainly an exciting goal and I'll be interested to follow and see how you get
on with that aim.
If people are in the market for some of the components that you offer for this platform,
how are they best to get in touch?
You can just visit my website, lambsprayracing.com or Instagram or just send me an email
through the website.
Pretty much everything which we offer is on the website.
Great thanks for the chat, really great to find out just how impressive this little
platform is and again we look forward to seeing you be the first into the oats.
Thank you.
If you liked that video, make sure you give it a thumbs up
and if you're not already a subscriber, make sure you're subscribed.
We release a new video every week.
And if you like free stuff, we've got a great deal for you.
Click the link in the description to claim your free spot to our next live lesson.